Hexahedral mesh generation method for swept volume based on sub-domains reconstruction" /> 基于子域重构的扫掠体六面体网格划分方法
Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
能源与机械工程     
基于子域重构的扫掠体六面体网格划分方法
代星1, 崔汉国1, 李正民1, 张立平2
1. 海军工程大学 机械工程系, 湖北 武汉 430033; 2. 武汉铁路职业技术学院,湖北 武汉 430205
Hexahedral mesh generation method for swept volume based on sub-domains reconstruction
DAI Xing1, CUI Han-guo1, LI Zheng-min1, ZHANG Li-ping2
1. Department of Mechanical Engineering, Naval University of Engineering, Wuhan 430033, China; 2. Wuhan Railway Vocational College of Technology, Wuhan 430205, China
 全文: PDF(1945 KB)   HTML
摘要：

针对扫掠体连接其他实体造成扫掠面结构网格划分困难,导致扫掠法无法在扫掠体内生成六面体网格的问题,提出针对扫掠体的六面体网格划分方法.该方法对扫掠面进行拓扑分解,依据结构网格节点的排列要求和分解域的连接关系综合计算棱边单元划分数.结合超限映射法在分解域内填充结构网格,依据扫掠法的基本步骤生成六面体网格；对不能采用结构网格填充的扫掠面子域进行重构以隔离非结构网格,对扫掠面子域边界外、内的网格区域先后进行扫掠生成最终六面体网格.实例表明,该方法稳定、可靠,可以处理复杂的2.5维实体六面体网格生成问题.
Abstract:

Hindered by sub-domains generated by other volumes connecting to the swept volume to generate structured mesh on swept surface, sweeping method can not be applied to generate hexahedral mesh in swept volume. A novel hexahedral meshing method for swept volume was proposed in order to solve the problem. Swept surface was topological decomposed. The number of divisions of edge was comprehensive computed based on the requirement of nodes arrangement of structured mesh and connectivity of decomposed domain. Structured mesh was mapped to the decomposed domain using transfinite interpolation method. The final hexahedral mesh was generated following basic steps of sweeping method. For some swept surfaces cannot filled with structured mesh, sub-domains on the swept surface were reconstructed to isolate unstructured mesh. The final hexahedral mesh was generated by sweeping the mesh outside and inside the boundary of subdomains restructured early and late. Examples demonstrate that the proposed method is reliable and robust, which can handle the hexahedral mesh generation problem of complex two-and-one-half dimensional geometries.
出版日期: 2014-10-01
:  TP 391  
基金资助:

湖北省自然科学基金资助项目(2012FB06904).
通讯作者: 崔汉国, 男,教授     E-mail: cuihanguo@163.com
作者简介: 代星(1983—), 男, 博士生, 从事有限元网格剖分、计算机图形的研究. E-mail: dxxg1949@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

代星, 崔汉国, 李正民, 张立平. 基于子域重构的扫掠体六面体网格划分方法[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2014.10.011.

DAI Xing, CUI Han-guo, LI Zheng-min, ZHANG Li-ping.

Hexahedral mesh generation method for swept volume based on sub-domains reconstruction
. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2014.10.011.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2014.10.011    或    http://www.zjujournals.com/eng/CN/Y2014/V48/I10/1788

［1］ KAWAMURA Y, ISLAM M S, SUMI Y. A strategy of automatic hexahedral mesh generation by using an improved whisker-weaving method with a surface mesh modification procedure ［J］. Engineering with Computers, 2008, 24(3): 215-229.
［2］ SCHONNING A, OOMMEN B, IONESCU I, et al. Hexahedral mesh development of free-formed geometry: the human femur exemplified ［J］. Computer-Aided Design, 2009, 41(8): 566-572.
［3］ ZHANG H, ZHAO G. Adaptive hexahedral mesh generation based on local domain curvature and thickness using a modified grid based method ［J］. Finite Elements in Analysis and Design, 2007, 43(9): 691-704.
［4］ SHEPHERD J F, JOHNSON C R. Hexahedral mesh generation constraints ［J］. Engineering with Computers, 2008, 24(3): 195-213.
［5］ 陈建军, 肖周芳, 曹建, 等. 多源扫掠体全六面体网格自动生成算法［J］. 浙江大学学报:工学版, 2012, 46(2): 274-279.
CHEN Jian-jun, XIAO Zhou-fang, CAO Jian, et al. Automatic hexahedral mesh generation for many-to-one sweep volumes ［J］. Journal of Zhejiang University: Engineering Science, 2012, 46(2): 274-279.
［6］ LI T S, ARMSTRONG C G, MCKEAG R M. Quad mesh generation for k-sided faces and hex mesh generation for trivalent polyhedral ［J］. Finite Elements in Analysis and Design, 1997, 26(4): 279-301.
［7］ RUIZ-GIRONS E, SARRATE J. Generation of structured hexahedral meshes in volumes with holes ［J］. Finite Elements in Analysis and Design, 2010, 46(10): 792-804.
［8］ RUIZ-GIRONS E, SARRATE J. Generation of structured meshes in multiply connected surfaces using submapping ［J］. Advances in Engineering Software, 2010, 41(2): 379-387.
［9］ SU Y, LEE K H, KUMAR A S. Automatic hexahedral mesh generation using a new grid-based method with geometry and mesh transformation ［J］. Computer Methods in Applied Mechanics and Engineering, 2005, 194(39): 4071-4096.
［10］ LIU S, UICKER J, GADH R. A dual geometry topology constraint approach for determination of pseudo-swept shapes as applied to hexahedral mesh generation ［J］. Computer-Aided Design, 1999, 31(6): 413-426.
［11］ MATTHEW N E. All hexahedral meshing of multiple source, multiple target, multiple axis geometries via automatic grafting and sweeping ［D］. Provo: Brigham Young University, 2005.
［12］ STATEN M L, KERR R A, OWEN S J, et al. Unconstrained plastering hexahedral mesh generation via advancing front geometry decomposition ［J］. International Journal for Numerical Methods in Engineering, 2010, 81(2): 135-171.
［13］ 毕运波, 柯映林, 董辉跃. 扫掠体六面体网格生成算法研究［J］. 浙江大学学报：工学版, 2007, 41(5): 727-731.
BI Yun-bo, KE Ying-lin, DONG Hui-yue. Hexahedral mesh generation algorithm of swept volume ［J］. Journal of Zhejiang University: Engineering Science, 2007, 41(5): 727-731.
 
[1] 何雪军, 王进, 陆国栋, 刘振宇, 陈立, 金晶. 基于三角网切片及碰撞检测的工业机器人三维头像雕刻[J]. 浙江大学学报(工学版), 2017, 51(6): 1104-1110.
[2] 王桦, 韩同阳, 周可. 公安情报中基于关键图谱的群体发现算法[J]. 浙江大学学报(工学版), 2017, 51(6): 1173-1180.
[3] 尤海辉, 马增益, 唐义军, 王月兰, 郑林, 俞钟, 吉澄军. 循环流化床入炉垃圾热值软测量[J]. 浙江大学学报(工学版), 2017, 51(6): 1163-1172.
[4] 毕晓君, 王佳荟. 基于混合学习策略的教与学优化算法[J]. 浙江大学学报(工学版), 2017, 51(5): 1024-1031.
[5] 王亮, 於志文, 郭斌. 基于双层多粒度知识发现的移动轨迹预测模型[J]. 浙江大学学报(工学版), 2017, 51(4): 669-674.
[6] 廖苗, 赵于前, 曾业战, 黄忠朝, 张丙奎, 邹北骥. 基于支持向量机和椭圆拟合的细胞图像自动分割[J]. 浙江大学学报(工学版), 2017, 51(4): 722-728.
[7] 穆晶晶, 赵昕玥, 何再兴, 张树有. 基于凹凸变换与圆周拟合的重叠气泡轮廓重构[J]. 浙江大学学报(工学版), 2017, 51(4): 714-721.
[8] 黄正宇, 蒋鑫龙, 刘军发, 陈益强, 谷洋. 基于融合特征的半监督流形约束定位方法[J]. 浙江大学学报(工学版), 2017, 51(4): 655-662.
[9] 蒋鑫龙, 陈益强, 刘军发, 忽丽莎, 沈建飞. 面向自闭症患者社交距离认知的可穿戴系统[J]. 浙江大学学报(工学版), 2017, 51(4): 637-647.
[10] 郭梦丽, 达飞鹏, 邓星, 盖绍彦. 基于关键点和局部特征的三维人脸识别[J]. 浙江大学学报(工学版), 2017, 51(3): 584-589.
[11] 戴彩艳, 陈崚, 李斌, 陈伯伦. 复杂网络中的抽样链接预测[J]. 浙江大学学报(工学版), 2017, 51(3): 554-561.
[12] 刘磊, 杨鹏, 刘作军. 采用多核相关向量机的人体步态识别[J]. 浙江大学学报(工学版), 2017, 51(3): 562-571.
[13] 王海军, 葛红娟, 张圣燕. 基于核协同表示的快速目标跟踪算法[J]. 浙江大学学报(工学版), 2017, 51(2): 399-407.
[14] 张亚楠, 陈德运, 王莹洁, 刘宇鹏. 基于增量图形模式匹配的动态冷启动推荐方法[J]. 浙江大学学报(工学版), 2017, 51(2): 408-415.
[15] 刘宇鹏, 乔秀明, 赵石磊, 马春光. 统计机器翻译中大规模特征的深度融合[J]. 浙江大学学报(工学版), 2017, 51(1): 46-56.