Please wait a minute...
浙江大学学报(工学版)
土木工程     
土压平衡盾构刀盘扭矩计算模型
卢浩,王明洋,夏沅谱,戎晓力
解放军理工大学 国防工程学院,江苏 南京210007
Calculation model of cutterhead torque for earth pressure balance shield
LU Hao, WANG Ming-yang, XIA Yuan-pu, RONG Xiao-li
School of Defense Engineering, PLA University of Science and Technology, Nanjing 210007,China
 全文: PDF(1325 KB)   HTML
摘要:

针对目前刀盘扭矩计算模型不统一、考虑施工动态参数欠缺的问题,提出一种考虑刀具贯入度、土仓压力的刀盘扭矩计算模型.通过现场试验及理论计算结果的对比,分析刀盘摩擦扭矩的组成,在此基础上,提出土压平衡盾构在掘进过程中刀盘扭矩不断变化的关键因素,选取3处712组现场实测数据进行回归分析,探讨刀具贯入度、土仓压力2个因素对刀盘扭矩的影响,并应用力学推导、数值模拟方法对2个因素影响刀盘扭矩的机理进行解释,给出考虑施工需求的刀盘极限扭矩的计算公式.结果表明: 刀盘背面摩擦扭矩不能忽略;当刀盘贯入度增大时,刀盘扭矩明显增大的原因主要是刀盘对开挖面土体挤压的增大,而不是刀具切削扭矩的增加;土仓压力对刀盘扭矩的影响主要是增大了刀盘背面摩擦扭矩.

Abstract:

Aiming at the problem that the calculation model of cutterhead torque is not uniform and the dynamic construction parameters have not been considered, a cutterhead torque calculation model considering tool penetration and earth pressure was proposed. By comparing the results of the field test and theoretical calculation, the composition of friction torque was discussed, then key influencing factors of cutterhead torque in shield tunneling process were put forword. Through the regressive analysis of 712 sets of data, the effects of cutter penetration and earth pressure on cutterhead torque were discussed. The mechanics calculation and numerical simulation method were applied to explain the influence mechanism of the two factors on cutterhead torque, and the calculation formula of cutterhead ultimate torque which  considered the construction needs were given. Results show that, the friction torque of the back of cutterhead cannot be ignored;  when the penetration of cutterhead increases, the main reason causing the obvious increase of cutterhead torque is the increase of extrusion of soil at the excavation face from cutterhead; and the main influence of earth pressure on cuttertorque is the increase of friction torque at the back of cutter head.

出版日期: 2014-09-01
:  U 455.43  
基金资助:

国家自然科学创新群体基金资助项目(51021001)

通讯作者: 王明洋,男,教授     E-mail: wmyrf@163.com
作者简介: 卢浩(1987-),男,博士生,研究方向为地下工程安全风险管理. E-mail: lh829829@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

卢浩,王明洋,夏沅谱,戎晓力. 土压平衡盾构刀盘扭矩计算模型[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2014.09.014.

LU Hao, WANG Ming-yang, XIA Yuan-pu, RONG Xiao-li. Calculation model of cutterhead torque for earth pressure balance shield. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2014.09.014.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2014.09.014        http://www.zjujournals.com/eng/CN/Y2014/V48/I9/1640

[1] 日本土木学会. 隧道标准规范(盾构篇)及解说[M]. 朱伟译.北京:中国建筑工业出版社,2001: 107-108.
[2] 日本土木学会. 盾构法的调查、设计、施工[M]. 牛清山等译.北京:中国建筑工业出版社,2008:123-124.
[3] 王洪新.土压平衡盾构刀盘挤土效应及刀盘开口率对盾构正面接触压力影响研究[J].土木工程学报,2009,42( 7) : 113-118.
WANG Hong-xin. Effect of cutterhead compressing the front soil and influence of head aperture ratio on contact pressure of EPB shield to the front soil [J]. China Civil Engineering Journal,2009,42(7) : 113-118.
[4] 王洪新.土压平衡盾构刀盘扭矩计算及其与盾构施工参数关系研究[J]. 土木工程学报,2009,42(9) :109-113.
WANG Hong-xin.Calculation of cutterhead torque for EPB shield and the relationship between cutterhead torque and shied driving parameters[J]. China Civil Engineering Journal,2009,42(9) : 109-113.
[5] 陈仁朋,刘源,汤旅军,等.复杂地层土压平衡盾构推力和刀盘扭矩计算研究[J].地下空间与工程学报,2012,8(1):26-32.
CHEN Ren-peng, LIU Yuan, TANG Lv-jun, et al. Research on calculation of thrust and cutter head torque on shield in complex strata [J]. Chinese Journal of Underground Space and Engineering, 2012,8(1):26-32.
[6] 管会生,高波.盾构刀盘扭矩估算的理论模型[J].西南交通大学学报,2008,43(2):213-218.
GUAN Hui-sheng, GAO Bo. Theoretical model for estimation of cutter head torque in shield tunneling [J]. Journal of Southwest Jiaotong University, 2008, 43( 2 ) : 213-218.
[7] 徐前卫,朱合华,丁文其,等.均质地层中土压平衡盾构施工刀盘切削扭矩分析[J]. 岩土工程学报, 2010,32(l):47-54.
XU Qian-wei, ZHU He-hua, DING Wen-hua, et al. Cutting torque during tunneling process of earth pressure balance shield machine in homogeneous ground [J]. Chinese Journal of Geotechnical Engineering, 2010, 32(l):47-54.
[8] 江玉生, 王丽娜, 杨志勇,等. 土压平衡式盾构刀盘扭矩计算方法研究[J].市政技术,2011,29(2):182-185.
JIANG Yu-sheng, WANG Li-na, YANG Zhi-yong, et al. Research of cutter torque calculation method of earth pressure balance shield [J]. Municipal Engineering Tech, 2011,29(2):182-185.
[9] 林建. 土体改良降低土压平衡式盾构刀盘扭矩的机理研究[D]. 南京:河海大学, 2006:48-59.
LIN Jian. Research on the law of soil conditioning reducing the cutterhead torque[D].Nanjing: Hohai University, 2006:48-59.
[10] 吕强,傅德明. 土压平衡盾构掘进机刀盘扭矩模拟试验研究[J]. 岩石力学与工程学报,2006,25(增1): 3137-3143.
LV Qiang, FU De-ming. Research on torque of cutterhead for earth pressure balance shield with simulating experimental [J]. Chinese Journal of RockMechanics and Engineering, 2006, 25(S1): 3137-3143.
[11] 邓立营,刘春光,党军锋. 盾构机刀盘扭矩及盾体推力计算方法研究[J].矿山机械,2010,38(17):13-16.
DENG Li-ying, LIU Chun-guang, DANG Jun-feng. Research on method of calculating torque of cutter head of shield machine and thrust of shield [J]. Mining Machine, 2010,38(17):13-16.
[12] 黄清飞. 砂卵石地层盾构刀盘刀具与土相互作用及其选型设计研究[D].北京:北京交通大学,2010:85-96.
HUANG Qing-fei. Research on interaction with soil of TBM cutting-wheel tools and their type selection design in gravel stratum [D]. Beijing: Beijing Jiaotong University, 2010:8596.
[13] 张厚美,吴秀国,曾伟华. 土压平衡式盾构掘进试验及掘进数学模型研究[J]. 岩石力学与工程学报,2005,24(增2):5762-5766.
ZHANG Hou-mei, WU Xiu-guo, ZENG Wei-hua. Study on tunneling experiment and mathematical model of EPB shield [J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24 (S2):5762-5766.

[1] 童磊, 谢康和, 卢萌盟, 王坤. 盾构任意衬砌变形边界条件下复变函数弹性解[J]. J4, 2010, 44(9): 1825-1830.