Please wait a minute...
浙江大学学报(工学版)
计算机科学技术     
异构有限元网格多场信息的等效集成方法
方锡武1,2 ,刘振宇1 ,谭建荣1 ,程丰备1
1. 浙江大学 CAD&CG国家重点实验室,浙江 杭州 310027;2.南京工程学院 机械工程学院,江苏 南京 211167
Equivalent and integrated method for information of multiple physical fields on heterogeneous finite element meshes
FANG Xi-wu1,2, LIU Zhen-yu1, TAN Jian-rong1, CHENG Feng-bei1
1. State Key Laboratory of CAD&CG, Zhejiang University, Hangzhou 310027, China; 2. School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing 211167, China
 全文: PDF(2521 KB)   HTML
摘要:

针对受多场作用的异构有限元网格信息集成问题,提出主/辅网格等效集成方法,即将异构有限元网格其中之一作为主网格,其他作为辅网格.采用等参逆变换方法将辅网格单元信息向主网格结点等效,最后在主网格中使用RGB三原色模型实现多物理场的集成化显示.将零件的四边形单元网格的结点属性向三角形单元网格结点属性等效,两者的应力分布图和等值线图的高度一致,验证了方法的正确性.本方法用于集成显示盾构刀具、刀盘的应力场和温度场综合作用分布,结果表明:两场在刀具刀刃部位的作用均较强,而对刀盘盘身的作用相对较弱.研究结果为刀具、刀盘的结构设计提供了有限元分析依据.

Abstract:

A primary-secondary-mesh method which focuses on how to integrate the information of the multiple physical fields on heterogeneous finite element meshes was proposed. One of the heterogeneous meshes is taken as primary mesh and the other the secondary one. The properties of the secondary mesh are equivalent to those of the primary mesh by the inverse isoperimetric mapping method, then, the multi-physical fields on different meshes are integrated and visualized on the primary mesh with the red, green, and blue (RGB) color model. An example that the nodal property of the part’s quadrilateral mesh being equivalent to that of its triangular mesh was presented. The high consistency of the stress distribution figures and the contour maps of these two meshes shows that this method is correct. This method was used to integrate and visualize the two fields of stress and temperature on the cutters and disk cutter of the shield machine. The results show that the two field’s actions are stronger on the blade of the cutter and weaker on the disk cutter. Some advices on the structural design of the cutter and the disk cutter by the finite element analysis were given.

出版日期: 2015-04-01
:  TP 391.9  
基金资助:

国家“973”重点基础研究发展规划资助项目(2013CB035400);国家自然科学基金资助项目(51075357).

通讯作者: 刘振宇,男,教授,博导.     E-mail: liuzy@zju.edu.cn
作者简介: 方锡武(1971—),男,副教授,主要从事工程与计算机图形学教学研究工作.E-mail: fangxiwu@njit.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

方锡武,刘振宇,谭建荣,程丰备. 异构有限元网格多场信息的等效集成方法[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2014.06.002.

FANG Xi-wu, LIU Zhen-yu, TAN Jian-rong, CHENG Feng-bei. Equivalent and integrated method for information of multiple physical fields on heterogeneous finite element meshes. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2014.06.002.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2014.06.002        http://www.zjujournals.com/eng/CN/Y2014/V48/I6/973

[1] 王东方,潘琼瑶,郑百林. 柴油机气缸盖多场耦合三维有限元分析[J].力学季刊,2005,26(3): 511-516.
WANG Dong-fang, PAN Qiong-yao, ZHENG Bai-lin, Three dimensional finite element method multi-Field coupling analysis for diesel engine cylinder Cap [J]. Chinese Quarterly of Mechanics, 2005, 26(3): 511-516.
[2] 蒋志强.基于ANSYS的发电设备热及热—结构藕合分析[D].杭州: 浙江大学,2006.JIANG Zhi-qiang. The heat and heat-structure coupled analysis on power generation assembly based on ANSYS [D]. Hangzhou: Zhejiang University, 2006.
[3] ZHAO C B, HOBBS B E, MUGHLHAUS H B. A consistent point-searching algorithm for solution interpolation in unstructured meshes consisting of 4-node bilinear quadrilateral elements[J]. International Journal for Uumerical Methods in Engineering, 1999, 45: 1509-1526.
[4] 刘振宇,傅云,谭建荣.基于异构网格耦合的产品多物理场有限元数据集成与可视化仿真[J].机械工程学报,2010, 46(7): 114-121.
LIU Zhen-yu, FU Yun, TAN Jian-rong, Integration and visual simulation of finite element data of product multiple physical fields based on coupling of heterogeneous meshes[J]. Journal of Mechanical Engineering, 2010, 46(7): 114-121.
[5] 傅云.复杂产品数字样机多性能藕合分析与仿真的若干关键技术研究及其应用[D].杭州:浙江大学,2008.
FU Yun, Research on the theory method and application of multi-performance coupled analysis and simulation of digital mock-up of complex products [D].Hangzhou: Zhejiang University, 2008.
[6] 莫尼卡.有限元分析:理论和ANSYS应用[M],北京:电子工业出版社,2008: 165-178.
[7] 孙家广,杨长贵.计算机图形学[M].北京:清华大学出版社,1994: 505-509.
[8] LANE J. An efficient point in polyhedron algorithm[J]. Computer Vision, Graphics, and Image Processing, 1984, 26(1): 118-125.
[9] 李春光,郑宏,葛修润,等.六面体单元等参逆变换的一种迭代解法[J].岩土力学, 2004, 25(7): 1050-1052.
LI Chun-guang, ZHENG Hong, GE Xiu-run, et al,An iterative algorithm of inverse isoparametric mapping for hexahedral elements[J]. Rock and Soil Mechanics, 2004, 25(7): 1050-1052.
[10] 徐燕萍,项阳,刘泉声,等.等参元逆变换插值法的研究及其应用[J].岩土力学, 2001,22(2): 226-232.
XU Yan-ping, XIANG Yang, LIU Quan-sheng, et al. Research on numerical inverse isoparametric mapping interpolation and its applications[J]. Rock and Soil Mechanics, 2001,22(2): 226-232.
[11] 钱向东,任青文,赵引.一种高效的等参有限元逆变换算法[J].计算力学学报, 1998,15(4): 437-441.
QIAN Xiang-dong, REN Qing-wen, ZHAO Yin. An efficient algorithm of inverse isoparametric mapping for finite element [J]. Chinese journal of Computational Mechanics, 1998, 15(4): 437-441.

[1] 郭超,侯增选, 杨广卿, 郑栓柱. 力反馈技术水墨扩散仿真[J]. 浙江大学学报(工学版), 2016, 50(9): 1695-1702.
[2] 马浩军,朱绍鹏,俞小莉,许印川,林鼎. 考虑侧倾运动的电动汽车电子差速控制[J]. 浙江大学学报(工学版), 2016, 50(3): 566-573.
[3] 邱斌斌,朱绍鹏,马浩军,方光明,应振有,宁晓斌. 电动车辆驱动控制系统仿真测试平台设计[J]. 浙江大学学报(工学版), 2015, 49(2): 4-5.
[4] 唐昉,周晓军,魏燕定. 改善人-车综合性能的变传动比反馈方法[J]. J4, 2014, 48(3): 456-462.
[5] 王贝,李基拓,陆国栋. 空间趋向曲线引导的网格曲面拼接[J]. J4, 2013, 47(11): 2003-2009.
[6] 唐昉, 周晓军, 魏燕定. 驾驶模拟器中的一种车辙可视化方法[J]. J4, 2013, 47(6): 1031-1035.
[7] 罗竹辉, 魏燕定, 周晓军, 魏春雨. 六自由度平台车辆运动模拟器变输入洗出算法[J]. J4, 2013, 47(2): 238-243.
[8] 赵振,张树有. 基于分步回归的低压断路器分断电流求解技术[J]. J4, 2012, 46(11): 1943-1952.
[9] 刘骥, 朱庆生, 黄晓凤, 曾令秋, 李松阳. 基于GPU的植物生长模拟[J]. J4, 2012, 46(10): 1803-1809.
[10] 魏春雨, 周晓军, 魏燕定, 唐昉. 基于Vortex的6自由度平台洗出运动仿真[J]. J4, 2012, 46(8): 1390-1396.
[11] 余小勇,魏燕定,黄茫茫,周晓军,杨辰龙. 基于HLA的车辆半实物仿真中精确定时方法[J]. J4, 2012, 46(7): 1195-1200.
[12] 李强, 刘淑莲, 应光耀, 郑水英. 考虑流固耦合作用的PET瓶跌落碰撞数值仿真[J]. J4, 2012, 46(6): 980-986.
[13] 赵振, 张树有. 全分断周期混合电流模型及其应用[J]. J4, 2012, 46(2): 301-308.
[14] 赵振,张树有. 低压断路器分断过程电磁-运动耦合问题求解[J]. J4, 2011, 45(11): 1913-1921.
[15] 刘阳, 戴松世. 注入及感应电流磁共振电阻抗成像对比[J]. J4, 2011, 45(10): 1848-1854.