计算机技术,无线电电子学 |
|
|
|
|
基于最少拍无波纹算法的高精度动态标准源反馈控制 |
叶凌云,陈波,张建,宋开臣 |
浙江大学 生物医学工程与仪器科学学院,浙江 杭州 310027 |
|
Feedback control of high precision dynamic standard source based on ripple-free deadbeat algorithm |
YE Ling-yun,CHEN Bo,ZHANG Jian,SONG Kai-chen |
Department of Biomedical Engineering and Instrument Science, Zhejiang University, Hangzhou 310027, China |
引用本文:
叶凌云,陈波,张建,宋开臣. 基于最少拍无波纹算法的高精度动态标准源反馈控制[J]. J4, 2013, 47(9): 1554-1558.
YE Ling-yun,CHEN Bo,ZHANG Jian,SONG Kai-chen. Feedback control of high precision dynamic standard source based on ripple-free deadbeat algorithm. J4, 2013, 47(9): 1554-1558.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2013.09.006
或
http://www.zjujournals.com/eng/CN/Y2013/V47/I9/1554
|
[1] NORRNEY-RICO J E, GARCIA P, GONZALEZ A. Robust stability analysis of filtered Smith predictor for time-varying
delay processes[J]. Journal of Process Control,2012, 22(10): 1975-1984.
[2] 杜振辉,李朝阳,蒋诚志,等. 基于Smith预估器的直流伺服控制器[J]. 仪器仪表学报,2003,24(4):326-328.
DU Zhen-hui, LI Zhao-yang, JIANG Cheng-zhi, et al. Design of DC servo-controller using smith estimator[J]. Chinese
Journal of Scientific Instrument, 2003,24(4):326-328.
[3] 颜菡,王先逵,段广洪. 基于最少拍无波纹的零相位误差跟踪控制在精密直线位移装置中的应用[J]. 机械工程学报, 2007(5):
111-115.
YAN Han, WANG Xian-kui, DUAN Guang-hong. Application of zpetc based least-beat and non-ripple control in precision linear
motor displacement systeM[J]. Chinese Journal of Mechanical Engineering, 2007(5): 111-115.
[4] LEE J H, KIM C G, YOUN M J. A dead-beat type digital controller for the direct torque control of an induction motor
[J]. IEEE Transactions on Power Electronics,2002, 17(5): 739-746.
[5] MONFARED M, RASTEGAR H. Design and experimental verification of a dead beat power control strategy for low cost
three phase PWM converters[J]. International Journal of Electrical Power & Energy Systems, 2012, 42(1): 418-425.
[6] MOSNA J, MELICHAR J, PESEK P. Minimum effort dead-beat control of linear servomechanisms with ripple-free response
[J]. Optimal Control Applications & Methods, 2001, 22(3): 127-144.
[7] 陈垒. 连续系统的传递函数模型辨识[D].无锡:江南大学, 2012.
CHEN Lei. Identification for transfer function models of continuous-time systems[D]. Wuxi:Jiangnan University, 2012.
[8] 宋志安,王文馨. 由阶跃响应曲线辨识传递函数的图解方法[J]. 山东科技大学学报:自然科学版, 2003, 22(1): 61-63.
SONG Zhi-an, WANG Wen-xin. Diagrammatic method of transfer function identified by step-up response curves[J]. Journal
of Shangdong University of Science and Technology:Natural Science, 2003, 22(1): 61-63.
[9] ANANTH I, CHIDAMBARAM M. Closed-loop identification of transfer function model for unstable systems[J]. Journal
of the Franklin Institute-engineering and Applied Mathematics,1999, 336(7): 1055-1061.
[10] 王伟,宋明顺,陈意华,等. 蒙特卡罗方法在复杂模型测量不确定度评定中的应用[J]. 仪器仪表学报,2008(7): 1446-1449.
WANG Wei,SONG Ming-shun, CHEN Yi-hua, et al. Application of Monte-Carlo method in measurement uncertainty evaluation of
complicated model[J]. Chinese Journal of Scientific Instrument, 2008(7): 1446-1449.
[11] 王琳娜,孟晓风. 一种新的正弦信号失真度评估方法[J]. 电子测量与仪器学报,2005(3): 67-71.
WANG Lin-na, MENG Xiao-feng. A new evaluation method for the distortion of sinusoidal signal[J]. Journal of Electronic
Measurement and Instrument, 2005(3): 67-71.
[12] 张耀,赵光宙,黄忠慧. 一种高精度失真度测量仪的研制[J]. 仪器仪表学报, 2007(5): 837-842.
ZHANG Yao, ZHAO Guang-zhou, HUANG Zhong-hui. Development of high precision distortion meter[J]. Chinese Journal of
Scientific Instrument, 2007(5): 837-842. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|