| ［1］ GERARD F, TOUMOUR M, MASRI N E, et a1. Numerical modeling of engine noise radiation through the use of acoustic transfer vectors- a case study ［J］. SAE Paper, 2001，01：11514．
［2］ LUA M H, JEN M U. Source identification and reduction of engine noise ［J］. Noise Control Engineering Journal, 2010, 58(3): 251-258．
［3］ SCHNEIDER M, LAHEY H P, STEDDENS C, et al. CAE process to eliminate powertrain noise and vibration ［J］. SAE Paper, 2002，01：10459．
［4］ 贾维新,郝志勇,杨金才. 基于形貌优化的低噪声油底壳研究［J］.浙江大学学报：工学版,2007,41(5)：770-773.
JIA Wei-xin, HAO Zhi-yong, YANG Jin-cai. Low noise design of oil pan based on topography optimization ［J］. Chinese Mechanical Engineering,2007, 41(5):770-773．
［5］ 张保成,左正兴.内燃机结构辐射噪声分析技术研究［J］.车用发动机,2006,165(5)：51-54．
ZHANG Bao-cheng, ZUO Zheng-xing. Research on the analytical techniques of radiant noise of ICE structure［J］. Vehicle Engine, 2006, 165(5):51-54．
［6］ 杨陈.低噪声轻量化单缸柴油机的虚拟设计技术研究［D］.杭州：浙江大学,2009:154-166．
YANG Chen. Research on light-weight and low-noise design for single cylinder diesel engine with virtual design technology ［D］. Hangzhou: Zhejiang University,2009: 154166．
［7］ RICCI S, RONCOSSI M, RIVOLA A. Model reduction of the flexible rotating crankshaft of a motorcycle engine cranktrain ［J］. International Journal of Rotating Machinery, 2011, 143523: 19．
［8］ 盛宏玉.结构动力学［M］.合肥：合肥工业大学出版社,2005:161167．
［9］ 孙军.内燃机曲轴-轴承系统摩擦学、刚度和强度的耦合分析［M］. 合肥,合肥工业大学出版社,2008: 1742．
［10］ SUN Jun. Effect of lubrication status of bearing on crankshaft strenth［J］. Journal of Tribology, 2007, 129: 887-894.
［11］ 郭磊,郝志勇,林琼.柴油机曲轴与气缸体系统动力学仿真研究［J］. 浙江大学学报：工学版,2007,41(5)：780-784．
GUO Lei, HAO Zhi-yong, LIN Qiong. Dynamic simulation research on diesel engines cranktrain and block［J］. Journal of Zhejiang University, Engineering Science Edition,2007,41(5)：780-784．
［12］ 刘月辉. 基于虚拟技术的发动机噪声控制研究［D］. 天津：天津大学,2004: 8295．
LIU Yue-hui. Study on engine noise control based on virtual design［D］. Tianjin: Tianjin University, 2004：82-95．
［13］ 贾维新,郝志勇,杨金才.虚拟预测方法在柴油机低噪声设计中的应用［J］.浙江大学学报：工学版,2007,41(3)：489-493．
JIA Wei-xin, HAO Zhi-yong, YANG Jin-cai. Application of virtual prediction method to low-noise diesel engine design［J］. Journal of Zhejiang University, Engineering Science Edition,2007, 41(3): 489-493．
［14］ 李民,舒歌群,卫海桥.基于拓扑优化和形状优化的低噪声齿轮室罩盖设计［J］.内燃机工程,2008,29（6）：55-59．
LI Min, SHU Ge-qun, WEI Hai-qiao. Design of a low noise engine gear cover based on topology and shape optimization ［J］. Chinese Internal Combustion Engine Engineering, 2008, 29(6): 55-59．
［15］ 万欣,林大渊.内燃机设计［M］.天津：天津大学出版社,1988:230-237． |
