Please wait a minute...
浙江大学学报(工学版)
J4  2012, Vol. 46 Issue (11): 1937-1942    DOI: 10.3785/j.issn.1008-973X.2012.11.001
机械工程     
面向车间质量管理的关键工序识别方法
唐任仲1,王国栋1,2,唐文东1,贾顺1
1. 浙江大学 工业工程中心 ,浙江省先进制造技术重点研究实验室,浙江 杭州 310027；
2. 上海汽车股份有限公司乘用车公司,上海 201804
Key process identification method for workshop quality management
TANG Ren-zhong1,WANG Guo-dong1,2,TANG Wen-dong1,JIA Shun1
1. Industrial Engineering Center, Key Laboratory of Advanced Manufacturing Technology of Zhejiang Province,
 Zhejiang University, Hangzhou 310027, China;2. SAIC Motor Passenger Vehicle Co., Shanghai 201804, China
 全文: PDF  HTML
摘要：

为了确定车间生产过程中的关键工序,以过程管理思想和80/20原理为指导,提出面向质量管理的关键工序识别方法.应用基于图论的方法建立生产车间模型,提出关键度的概念来描述车间模型中工序节点的关键程度,并从工序节点对其他节点的影响程度和工序节点自身的质量水平2个方面出发,对生产车间模型中工序节点的关键度进行定量计算.结合某汽车电机企业的生产车间,说明关键工序识别方法的详细实现步骤.应用结果表明,该方法能够有效地识别车间生产过程中的关键工序,为在车间质量管理中实现对工序的重点监控与改进提供可靠的支持.
Abstract:

Instructed by the theory of process management and The 80/20 Principle, the quality management-oriented key process identification method was developed to determine the key processes of the workshop manufacturing processes. The workshop model was built on the basis of graph theory, and the concept of criticality was presented to describe the importance of process nodes in the proposed model. The criticality of the process node was computed based on two aspects: the impact on other nodes in the model, and the internal quality level. A case study in an automobile motor workshop demonstrated the implementation steps in detail. The application shows that the key process identification method can be used to not only find out the key processes effectively, but also provide reliable support for monitoring and improving the key processes in the workshop manufacturing quality management．
出版日期: 2012-12-11
:  TP 391  
基金资助:

国家自然科学基金资助项目（50675201）;浙江省重大科技专项资助项目（2010C01015）.
作者简介: 唐任仲（1961-），男，教授，博导，从事过程管理、制造业信息化方面的研究. Email: tangrz@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

唐任仲,王国栋,唐文东,贾顺. 面向车间质量管理的关键工序识别方法[J]. J4, 2012, 46(11): 1937-1942.

TANG Ren-zhong,WANG Guo-dong,TANG Wen-dong,JIA Shun. Key process identification method for workshop quality management. J4, 2012, 46(11): 1937-1942.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.11.001    或    http://www.zjujournals.com/eng/CN/Y2012/V46/I11/1937

［1］ 郑力, 江平宇, 乔立红, 等. 制造系统研究的挑战和前沿［J］. 机械工程学报, 2010, 46(21): 124-136．
ZHENG Li, JIANG Pingyu, QIAO Lihong, et al. Challenges and frontiers of manufacturing systems ［J］. Journal of Mechanical Engineering, 2010,46(21): 124-136．
［2］ HELBING D, ARMBRUSTER D, MIKHAILOV A S, et al. Information and material flows in complex networks ［J］. Physica A: Statistical Mechanics and its Applications, 2006, 363(1): 11-16．
［3］ MATHIEU L, MARGUET B. Integrated design method to improve producibility based on product key characteristics and assembly sequences ［J］. CIRP Annals Manufacturing Technology, 2001, 50(1): 85-88．
［4］ 刘明周, 任兰. 面向产品的制造质量控制模型研究［J］. 计算机集成制造系统,2004,10(7): 764-768．
LIU Mingzhou, REN Lan. Manufacturing quality control model oriented to product ［J］. Computer Integrated Manufacturing Systems, 2004, 10(7): 764-768．
［5］ 刘志存, 邹冀华, 范玉青. 飞机制造中关键特性的定义与管理［J］. 计算机集成制造系统,2007,13(10): 2013-2018．
LIU Zhicun, ZOU Jihua, FAN Yuqing. Definition & management of key characteristics in aircraft manufacturing ［J］. Computer Integrated Manufacturing Systems, 2007,13(10): 2013-2018．
［6］ KIM J, HUANG Q, SHI J. Latent variable based key process variable identification and process monitoring for forging ［J］. Journal of Manufacturing Systems, 2007, 26(1): 53-61．
［7］ 王立岩, 唐加福, 宫俊. 冷轧辊生产中机加工环节的关键工序质量控制［J］. 东北大学学报：自然科学版, 2009, 30(6): 786-789．
WANG Liyan, TANG Jiafu, GONG Jun. Quality control of key stages during cold roller machining procedure ［J］. Journal of Northeastern University: Natural Science, 2009, 30(6): 786-789．
［8］ GHOMI S F, TEIMOURI E. Path critical index and activity critical index in PERT networks ［J］. European Journal of Operational Research, 2002, 141(1): 147-152．
［9］ CHEN S P. Analysis of critical paths in a project network with fuzzy activity times ［J］. European Journal of Operational Research, 2007, 183(1): 442-459．
［10］ FRANCISCO A R, ALFONSO D. Critical clouds and critical sets in resourceconstrained projects ［J］.International Journal of Project Management, 2004, 22: 489-497．
［11］ GENTIL S, MONTMAIN J. Hierarchical representation of complex systems for supporting human decision making ［J］. Advanced Engineering Informatics, 2004, 18(3): 143-159．
［12］ 潘志毅, 黄翔, 李迎光. 有向图向设计结构矩阵与多色集合同步映射的设计过程规划方法［J］. 计算机集成制造系统, 2008, 14(7): 1274-1280．
PAN Zhiyi, HUANG Xiang, LI Yingguang. Product design process planning method based on synchronous mapping from directed graph to design structure matrix and polychromatic sets ［J］. Computer Integrated Manufacturing Systems, 2008, 14(7): 1274-1280．
［13］ 张开富, 李原, 邵毅, 等. 一种集成装配过程信息的装配建模方法［J］. 西北工业大学学报, 2005, 23(2): 222-226.
ZHANG Kaifu, LI Yuan, SHAO Yi, et al. Including assembly process information(API) in product assembly model for better assembly of product ［J］. Journal of Northwestern Polytechnical University. 2005, 23(2): 222-226．
［14］ 耿素云. 离散数学二分册: 集合论与图论［M］. 北京: 北京大学出版社, 1998. 264-270．
［15］ 王国栋, 唐任仲,刘运通,等. 中小制造企业产品制造生命周期质量导航系统［J］. 浙江大学学报:工学版, 2011, 45 (8): 1329-1336．
WANG Guodong, TANG Renzhong, LIU YunTong, et al. Quality navigation system for product manufacturing life in SMMEs ［J］. Journal of Zhejiang University: Engineering Science, 2011, 45 (8): 1329-1336.
[1] 赵建军,王毅,杨利斌. 基于时间序列预测的威胁估计方法[J]. J4, 2014, 48(3): 398-403.
[2] 崔光茫, 赵巨峰, 冯华君, 徐之海, 李奇, 陈跃庭. 非均匀介质退化图像快速仿真模型的建立[J]. J4, 2014, 48(2): 303-311.
[3] 张天煜, 冯华君, 徐之海, 李奇, 陈跃庭. 基于强边缘宽度直方图的图像清晰度指标[J]. J4, 2014, 48(2): 312-320.
[4] 刘中, 陈伟海, 吴星明, 邹宇华, 王建华. 基于双目视觉的显著性区域检测[J]. J4, 2014, 48(2): 354-359.
[5] 王相兵,童水光,钟崴,张健. 基于可拓重用的液压挖掘机结构性能方案设计[J]. J4, 2013, 47(11): 1992-2002.
[6] 王进, 陆国栋, 张云龙. 基于数量化一类分析的IGA算法及应用[J]. J4, 2013, 47(10): 1697-1704.
[7] 刘羽, 王国瑾. 以已知曲线为渐进线的可展曲面束的设计[J]. J4, 2013, 47(7): 1246-1252.
[8] 胡根生,鲍文霞,梁栋,张为. 基于SVR和贝叶斯方法的全色与多光谱图像融合[J]. J4, 2013, 47(7): 1258-1266.
[9] 吴金亮, 黄海斌, 刘利刚. 保持纹理细节的无缝图像合成[J]. J4, 2013, 47(6): 951-956.
[10] 陈潇红,王维东. 基于时空联合滤波的高清视频降噪算法[J]. J4, 2013, 47(5): 853-859.
[11] 朱凡,李悦,蒋 凯,叶树明,郑筱祥. 基于偏最小二乘的大鼠初级运动皮层解码[J]. J4, 2013, 47(5): 901-905.
[12] 吴宁, 陈秋晓, 周玲, 万丽. 遥感影像矢量化图形的多层次优化方法[J]. J4, 2013, 47(4): 581-587.
[13] 计瑜,沈继忠,施锦河. 一种基于盲源分离的眼电伪迹自动去除方法[J]. J4, 2013, 47(3): 415-421.
[14] 王翔,丁勇. 基于Gabor滤波器的全参考图像质量评价方法[J]. J4, 2013, 47(3): 422-430.
[15] 童水光, 王相兵, 钟崴, 张健. 基于BP-HGA的起重机刚性支腿动态优化设计[J]. J4, 2013, 47(1): 122-130.