Please wait a minute...
浙江大学学报(工学版)
J4  2011, Vol. 45 Issue (8): 1475-1479    DOI: 10.3785/j.issn.1008-973X.2011.08.025
光学工程     
基于线阵CCD的大视场二维平面定位系统
彭超然, 郑臻荣, 李海峰, 刘旭
浙江大学 现代光学仪器国家重点实验室,浙江 杭州 310027
Wide field of view and two-dimensional position measurement
system based on linear CCD
PENG Chao-ran, ZHENG Zhen-rong, LI Hai-feng, LIU Xu
State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

为了克服当前交互式电子白板系统技术复杂、定位精度低等缺点,提出一种基于线阵电荷耦合器件（CCD）的大视场二维平面定位系统,该系统由待定位物体、CCD摄像装置和信号处理电路组成.CCD获取待定位物体的信息送入信号处理电路处理,通过坐标变换快速校正CCD光学系统引起的畸变,得到待定位物体的位置.系统定位距离为1 360 mm,二维定位平面大小为1 574 mm×1 260 mm,定位误差小于2 mm,定位精度高于0.2%.搭建了相应的大视场二维平面定位系统.实验结果表明,该系统可实现大角度非接触式二维物体的精确动态定位.
Abstract:

In order to avoid the complicated technology and low position accuracy in current interactive electronic whiteboard, a wide field of view and two-dimensional position measurement system based on linear array charge-coupled device (CCD) camera is proposed for the interactive whiteboard. This system was composed of three parts: the object to be located, CCD camera device and signal processing circuit. The position information of object on 2-D plane was obtained by the CCD camera. By the method of coordinate transformation specially designed in signal processing circuit, the precise position of the object on 2-D plane can be acquired with the process of the signal comes from CCD camera. The location distance of the system was 1 360 mm, scale of the 2-D plane was 1 574 mm×1 260 mm and precision was less than 2mm. The experimental results show that the system can reach the precision requirement of two-dimensional dynamic measurement system.
出版日期: 2011-09-08
:  TP 212.9  
通讯作者: 李海峰,男,教授,博导.     E-mail: lihaifeng@zju.edu.cn
作者简介: 彭超然(1984—),男,硕士,从事光电显示技术研究.E-mail: pengpeng0912@sina.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

彭超然, 郑臻荣, 李海峰, 刘旭. 基于线阵CCD的大视场二维平面定位系统[J]. J4, 2011, 45(8): 1475-1479.

PENG Chao-ran, ZHENG Zhen-rong, LI Hai-feng, LIU Xu. Wide field of view and two-dimensional position measurement
system based on linear CCD. J4, 2011, 45(8): 1475-1479.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.08.025    或    https://www.zjujournals.com/eng/CN/Y2011/V45/I8/1475

［1］ 王庆有.CCD应用技术［M］.天津:天津大学出版社,2000: 173-228.
［2］ 马登极,朱善安,王长军.线阵CCD在高精度测径系统中的应用［J］.计算机测量与控制,2006,14(2): 175-176, 185.
MA Dengji, ZHU Shanan, WANG Changjun. Application of linear CCD in high precision diameter measuring system［J］. Computer Measurement & Control, 2006, 14(2): 175-176, 185.
［3］ 骆文博,王广志,丁海曙.基于线阵CCD的高精度位置检测［J］.清华大学学报：自然科学版,2002,42(9): 1139-1143.
LUO Wenbo, WANG Guangzhi, DING Haishu. 3D positioning system based on linear CCD camera ［J］. Journal of Tsinghua University: Science and Technology, 2002, 42(9): 1139-1143.
［4］ 艾莉莉,袁峰,丁振良.应用线阵CCD的空间目标外姿态测量系统［J］.光学精密工程,2008,16(1): 161-165.
YUAN Lili, YUAN Feng, DING Zhengliang. An exterior attitude measurement system for spatial object based on linear CCD ［J］. Optics and Precision Engineering, 2008, 16(1): 161-165.
［5］ CHEN Wenyuan, WANG Jingwein, CHUNG Chinho. Electronic whiteboard construction using whiteboard and imagelocating techniques ［J］. Optical Engineering, 2009, 48 (11), 117-202.
［6］ 徐韡,刘向东,孟晓.基于光学信息处理的交互式电子白板［J］.浙江大学学报:工学版,2006,40(1): 33-37.
XU Wei, LIU Xiangdong, MENG Xiao. Interactive eletronic whiteboard based on optical information processing ［J］. Journal of Zhejiang University: Engineering Science, 2006, 40(1): 33-37.
［7］ 求是科技.CPLD/FPGA应用开发技术与工程实践［M］,北京:人民邮电出版社,2005： 1-21.
［8］ 王丰,李海峰,郑臻荣,等.光点位置测量系统摄像镜头设计［J］,光电工程,2008,35(10): 107-110.
WANG Feng, LI Haifeng, ZHEN Zhengrong. Video lens design for lightspot positioning system based on linear array CCD ［J］. OptoElectronic Engineering, 2008, 35(10): 107-110.
［9］ HE Yuan, SUNJun, SATOSHI N, et al.Enhancement of camerabased whiteboard images ［J］.SPIE, 2010, 7534, 75340G.
［10］ 李晓彤,岑兆丰.几何光学·像差·光学设计［M］,杭州:浙江大学出版社,2003： 125-127.
[1] 杨波, 邹富强. 异向性磁阻传感器检测车流量的新方法[J]. J4, 2011, 45(12): 2109-2114.
[2] 高小明, 李毅, 蔡巍, 郭红荪, 王平. 基于光寻址电位传感器的无线节点设计[J]. J4, 2011, 45(2): 392-396.