Please wait a minute...
浙江大学学报(工学版)
J4  2011, Vol. 45 Issue (8): 1360-1365    DOI: 10.3785/j.issn.1008-973X.2011.08.005
机械工程     
T型导轨二维压弯回弹解析与试验
周磊, 余忠华, 胡志辉, 宋有硕
浙江大学 现代制造工程研究所,浙江 杭州 310027
Two-dimensional bending springback analysis and test of T-rail
ZHOU Lei, YU Zhong-hua, HU Zhi-hui, SONG You-shuo
Institute of Modern Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

针对T型导轨压弯校正工艺中回弹量难以准确获得的问题展开讨论.考虑到T型导轨水平方向为对称截面而垂直方向为非对称截面,不同方向上的压弯回弹规律有较大的差异性与复杂性,利用线性强化弹塑性理论分析了T型导轨水平与垂直二个维度上的压弯回弹特性,得出各维度上的回弹曲率与压弯曲率、回弹量与压弯量间的解析表达式,以此为基础可方便得出一定压弯量下的回弹量.在电子万能试验机上进行T型导轨的二维压弯试验,通过比较一定压弯量下的解析回弹量与试验回弹量,结果表明,两者间的最小相对误差侧面为1.35%、顶面为1.97%,回弹解析具有较高的精度,但相对误差随压弯量的增大而有所增大,误差增大的原因与回弹解析过程中的弹塑性力学假设有关.
Abstract:

In order to obtain the accurate springback in the bending correction process of T-rail, considering T-rail has vertical non-symmetrical cross-section besides horizontal symmetrical cross-section, the bending springback rules in both directions had great diversity and complexity, linear hardening elastic-plastic theory was used to analyze the mechanism of two-dimensional bending springback, the analytical expressions of springback curvature and bending curvature, springback and bending deflection, were gained. So the springback of specific bending could be easily obtained. The two-dimensional bending tests of T-rail were conducted by Electronic Universal Testing Machine, comparing the springback obtained by analytical expressions and tests, the minimum relative error is 1.35% in the horizontal direction and 1.97% in the vertical direction, it shows the springback expressions are accurate, but the relative errors of analytical springback will rise with the increase of bending deflection because of elastic-plastic mechanics assumption in the springback analysis.
出版日期: 2011-09-08
:  TG 333  
基金资助:

国家自然科学基金资助项目(50835008)；浙江省科技计划资助项目(2008C21124).
通讯作者: 余忠华,男,博导.     E-mail: yuzhh@zju.edu.cn
作者简介: 周磊(1983—),男,博士生,从事先进制造及质量控制方面研究工作.E-mail: zhouleidr@gmail.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

周磊, 余忠华, 胡志辉, 宋有硕. T型导轨二维压弯回弹解析与试验[J]. J4, 2011, 45(8): 1360-1365.

ZHOU Lei, YU Zhong-hua, HU Zhi-hui, SONG You-shuo. Two-dimensional bending springback analysis and test of T-rail. J4, 2011, 45(8): 1360-1365.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.08.005    或    https://www.zjujournals.com/eng/CN/Y2011/V45/I8/1360

［1］ VOLEBOV I F, POLYAKOV A P, KOLMOGOROV S V. Mathematical model of rail straightening and experimental estimation of its adequacy ［J］.Journal of Materials Processing Technology, 1994, 40(1/2): 213-218.

［2］ 钦明浩,柯尊忠,张向军,等.精密矫直机中轴类零件矫直工艺理论研究［J］.机械工程学报,1997,33(2): 48-53.

QIN Minghao, KE Zunzhong, ZHANG Xiangjun, et al. Study on straightening technical theory of shaftkind in exact straightening press ［J］.Chinese Journal of Mechanical Engineering, 1997, 33 (2): 48-53.

［3］ KATOH T, URATA E. Measurement and control of a straightening process for seamless pipes ［J］. Journal of Engineering for IndustryTransactions of the ASME, 1993, 115(3): 347-351.

［4］ ELSHARKAWY A A, EIDOMIATY A A. Determination of stretchbend ability limits and springback for Tsection beams ［J］. Journal of Materials Processing Technology, 2001, 110(3): 265-276.

［5］ EIDOMIATY A A, ELSHARKAWY A A. Stretchbending analysis of Usection beams ［J］. International Journal of Machine Tools and Manufacture, 1998, 38(1/2): 75-95.

［6］ EIDOMIATY A A. Stretch forming of beams of nonuniform section ［J］. Journal of Materials Processing Technology, 1990, 22(1): 21-28.

［7］ 余同希,章亮炽.塑性弯曲理论及其应用［M］.北京:科学出版社,1992: 10-15.

［8］ WU B J, CHAN L C, LEE T C, et al. A study on the precision modeling of the bars produced in two crossroll straightening ［J］. Journal of Materials Processing Technology, 2000, 99(1/3): 202-206.

［9］ 弋景刚,王泽河,么永强,等.基于在线测量系统的轴类零件精密矫直工艺［J］.农业机械学报,2005,36(1): 127-129.

YI Jinggang, WANG Zehe, YAO Yongqiang, et al. Study on straightening technology of shaft parts based on online measurement system ［J］. Transactions of the Chinese Society of Agricultural Machinery, 2005, 36(1): 127-129.

［10］ 孙杰,柯映林.大型整体结构件数控加工变形校正的关键技术研究［J］.机械工程学报,2003,39(8): 120-124.

SUN Jie, KE Yinglin. Study on key technologies of straightening largescale integrated parts distortion due to machining ［J］. Chinese Journal of Mechanical Engineering, 2003, 39(8): 120-124.
No related articles found!