Please wait a minute...
J4  2010, Vol. 44 Issue (5): 849-853    DOI: 10.3785/j.issn.1008-973X.2010.05.003
自动化技术、计算机技术     
基于路径加权反馈的工业环网时钟同步方法
章涵, 冯冬芹, 褚健
浙江大学 先进控制研究所, 浙江 杭州310027
Industrial ring network time synchronization based on waydelay weighted feedback algorithm
ZHANG Han, FENG Dong-qin, CHU Jian
Institute of Advanced Process Control, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要:

为了实现大规模环形网络系统中所有结点的高精度时钟同步,根据环形链路存在物理环路的特点,通过环形链路中的备用链路,由主时钟进行累积同步偏差反馈.基于该累积同步偏差和所有设备间时钟同步数据帧在环网中的传输时延,对累积偏差进行路径加权反馈,实现系统中所有时钟的偏差补偿,提高其同步精度,从而实现大规模工业环形网络的高精度时钟同步.在分析单跳同步偏差以及边界时钟累积同步偏差的基础上,得出基于路径加权反馈后所有设备的同步偏差,理论证明了该算法的有效性.进一步通过实验验证,该算法显著提高了环形网络时钟同步精度

Abstract:

The backup link in ring topology was used as feedback path according to the characteristic of the physical link in order to satisfy the requirement of high precise time synchronization in large scale industrial network. The accumulated offset was feedbacked to all devices in the ring network by master device. Based on the accumulated offset and the delay of synchronization frames between each device in the ring network, the path weighted feedback algorithm was introduced to improve the precision of synchronization of each slave device with offset compensation. Then the high precise time synchronization of large scale industrial ring network was achieved. The offset of each device was calculated using waydelay weighted feedback algorithm based on the offset of onejump synchronization and the accumulated offset of boundary clock algorithm. The theoretical analysis and experimental results show that the algorithm can achieve higher precise time synchronization in industrial ring network.

出版日期: 2012-03-19
:  TP 393  
基金资助:

国家创新研究群体科学基金资助项目(60721062);国家“863”高技术研究发展计划资助项目(2006AA040301,2007AA041301).

通讯作者: 冯冬芹,男,教授.     E-mail: dqfeng@iipc.zju.edu.cn
作者简介: 章涵(1983—),男, 浙江金华人,博士生,从事网络时钟同步技术的研究.E-mail: zhanghan@supcon.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

章涵, 冯冬芹, 褚健. 基于路径加权反馈的工业环网时钟同步方法[J]. J4, 2010, 44(5): 849-853.

ZHANG Han, FENG Dong-Qin, CHU Jian. Industrial ring network time synchronization based on waydelay weighted feedback algorithm. J4, 2010, 44(5): 849-853.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.05.003        http://www.zjujournals.com/eng/CN/Y2010/V44/I5/849

[1]  IEEE std 802.3 2002, Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specification [S]. New York: IEEE, 2002.

[2] EPA criterion for industrial control system,digital communication for measurement and control [S]. Beijing: National Standard Committee, 2004.

[3] IEEE std 1588 2008, IEEE standard for a precision clock synchronization protocol for networked measurement and control systems [S]. New York: IEEE, 2008.

[4] GADERER G, LOSCHMIDT P, SAUTER T, et al. Investigations on fault tolerant clock synchronization within a powerline communication structure [C]∥2006 IEEE International Symposium on Power Line Communications and Its Applications. Orlando: IEEE, 2006: 178183.

[5] 黄文君,遇彬.基于FPGA的精确时钟同步方法[J\].浙江大学学报:工学版,2007,41(10): 16971700.

HUANG Wenjun, YU Bin. Method for precise time synchronization based on FPGA [J]. Journal of Zhejiang University: Engineering Science, 2007, 41(10): 16971700.

[6] KOHLER D. A practical implementation of an IEEE1588 supporting ethernet switch [C\]∥ Precision Clock Synchronization for Measurement, Control and Communication. Vienna: IEEE, 2007: 134137.

[7] 黄文君,金建祥,冯冬芹,等.控制系统的冗余策略和实现准则[J].仪器仪表学报,2004, 25(4): 545547.

HUANG Wenjun, JIN Jianxiang, FENG Dongqin, et al. Research on redundancy strategy and design rule in control system [J]. Chinese Journal of Scientific Instrument, 2004, 25(4): 545547.

[8] EIDSON J, HAMILTON B. IEEE1588 node synchronization improvement by high stability oscillators [C]∥Workshop on IEEE 1588, Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems. Gaithersburg, Maryland: IEEE, 2003: 95101.

[9] 张先富,冯冬芹.基于加权最小二乘法的精确时钟同步算法研究与实现[J].传感技术学报,2008,21(9): 15561560.

ZHANG Xianfu, FENG Dongqin. Realization of precise time synchronization algorithm based on weighted leastsquares algorithm[J]. Chinese Journal of Sensors and Actuators, 2008, 21(9): 15561560.

[10] FERRARI P, FLAMMINI A, MAMRIOLI D, et al. Synchronization of the probes of a distributed instrument for realtime ethernet networks [C]∥ IEEE International Symposium on ISPCS. Vienna: IEEE, 2007: 3340.

[1] 李德骏,汪港,杨灿军,金波,陈燕虎. 基于NTP和IEEE1588海底观测网时间同步系统[J]. J4, 2014, 48(1): 1-7.
[2] 郭童,林峰. 基于混合遗传鱼群算法的贝叶斯网络结构学习[J]. J4, 2014, 48(1): 130-135.
[3] 杜瑞忠, 田俊峰, 张焕国. 基于信任和个性偏好的云服务选择模型[J]. J4, 2013, 47(1): 53-61.
[4] 张帅,孙建伶,徐斌,黄超,KAVS Aleksander J.. 基于RBAC的跨多企业服务组合访问控制模型[J]. J4, 2012, 46(11): 2035-2043.
[5] 陈岁生,卢建刚,楼晓春. 基于MDS-MAP和非线性滤波的WSN定位算法[J]. J4, 2012, 46(5): 866-872.
[6] 杨朝晖,李善平,林欣. 增量型上下文信息服务的质量优化实时调度[J]. J4, 2012, 46(1): 90-97.
[7] 潘巨龙,李善平,张道远. 无线传感器网络簇内可疑节点的博弈检测方法[J]. J4, 2012, 46(1): 72-78.
[8] 高庆,李善平,杨朝晖. 基于虚拟场的能量高效传感器网络地理路由[J]. J4, 2012, 46(1): 98-104.
[9] 钱剑锋, 尹建伟, 董金祥. 结构化P2P网络的语义发布/订阅系统
负载均衡算法
[J]. J4, 2011, 45(10): 1710-1719.
[10] 杨朝晖,李善平,林欣. LBS中面向K-匿名服务资源约束的匿名度调节算法[J]. J4, 2011, 45(7): 1154-1160.
[11] 潘纲, 李石坚, 陈云星. ScudContext:信息-物理空间融合的大规模
环境上下文服务
[J]. J4, 2011, 45(6): 991-998.
[12] 车建华, 何钦铭, 陈建海, 王备. 基于软件模拟的虚拟机系统故障插入工具[J]. J4, 2011, 45(4): 614-620.
[13] 李鉴庭,金心宇,唐军,张昱. 基于无线多媒体传感器网络的目标定位方法[J]. J4, 2011, 45(1): 45-49.
[14] 张莉苹,潘纲,郑能干,杨国青,李红,赵民德. SmartC模型与代码一致性双向生成方法及开发平台[J]. J4, 2011, 45(1): 20-29.
[15] 舒挺, 孙守迁,王海宁,徐伟强. ESIS序列自适应生成算法[J]. J4, 2010, 44(11): 2183-2187.