[1] CHAO P Y, CHEN T T. Analysis of assembly through product configuration [J].Computers in Industry, 2001, 44(2): 189203.
[2] ALEXANDER F, GERHARD F, DIETMAR J. Conceptual modeling for configuration of masscustomizable products[J]. Artificial Intelligence in Engineering, 2001, 15(2): 165176.
[3] 吴健,陈刚,尹建伟,等.基于本体的产品配置知识共享[J].浙江大学学报:工学版,2004,38(4): 478483.
WU Jian, CHEN Gang, YIN Jianwei, et al. Ontology based product configuration for sharing [J]. Journal of Zhejiang University: Engineering Science, 2004, 38 (4): 478483.
[4] 张劲松,王启富,万立,等.基于本体的产品配置建模研究[J].计算机集成制造系统,2003,9(5): 344350.
ZHANG Jinsong, WANG Qifu, WAN Li, et al. Product configuration modeling based on ontology [J].Computer Integrated Manufacturing System, 2003, 9(5): 344350.
[5] 高鹏,林兰芬,蔡铭,等.基于本体映射的产品配置模型自动获取[J].计算机集成制造系统,2003,9(9): 810816.
GAO Peng, LIN Lanfen, CAI Ming, et al. Automatic acquisition of product configuration model based on ontology mapping [J]. Computer Integrated Manufacturing System, 2003, 9(9): 810816.
[6] 顾巧祥,纪杨建,祁国宁,等.基于ECA规则和事物特性表的产品配置模型[J].浙江大学学报:工学版,2006, 40(5): 753758.
GU Qiaoxiang, JI Yangjian, QI Guoning, et al. Product configuration model based on ECA rules and tabular layouts of article characteristics [J]. Journal of Zhejiang University: Engineering Science, 2006, 40(5): 753758.
[7] 阴向阳,童秉枢,滕东兴,等.产品配置到产品结构的转化算法 [J].清华大学学报:自然科学版,2000,40(5): 5861.
YIN Xiangyang, TONG Bingshu, TENG Dongxing, et al. Transformation of product configuration into product structure [J]. Journal of Tsinghua University: Science and Technology, 2000,40 (5): 5861.
[8] 王世伟,谭建荣,张树有,等.基于GBOM的产品配置研究[J].计算机辅助设计与图形学学报,2004, 16 (5): 655659.
WANG Shiwei, TAN Jianrong, ZHANG Shuyou, et al.Product configuration based on generic bill of material [J]. Journal of ComputerAided Design and Computer Graphics, 2004, 16 (5): 655659.
[9] 魏喆,谭建荣,冯毅雄,等.基于相似性的产品模块构建方法及其应用[J].计算机辅助设计与图形学学报,2006,18(12): 19301934.
WEI Zhe, TAN Jianrong, FENG Yixiong, et al. Construction of product module based on similarity and its applications [J]. Journal of ComputerAided Design and Computer Graphics, 2006, 18(12): 19301934.
[10] 王世伟,谭建荣,张树有,等.产品配置模型的演化与再配置[J].计算机辅助设计与图形学学报,2005,17(2):347352.
WANG Shiwei, TAN Jianrong, ZHANG Shuyou, et al. Evolution of product configuration model and reconfiguration [J]. Journal of ComputerAided Design and Computer Graphics, 2005,17(2): 347352.
[11] 谢清,谭建荣,冯毅雄,等.面向配置设计的产品功构单元粒度划分方法[J].机械工程学报,2006,42(11): 109114.
XIE Qing, TAN Jianrong, FENG Yixiong, et al. Granularity or product functionstructure unit orient to configuration design [J]. Chinese Journal of Mechanical Engineering, 2006,42(11): 109114.
[12] 龚京忠,邱静,李国喜,等.基于可拓理论的产品配置设计[J].计算机集成制造系统,2007,13(9): 17001709.
GONG Jingzhong,QIU Jing,LI Guoxi, et al. Product configuration design based on extension theory [J].Computer Integrated Manufacturing System, 2007,13(9): 17001709.
[13] 黄长林,谭建荣,张树有,等.按单设计型复杂产品多层次配置设计方法研究[J].计算机集成制造系统,2007,13(7): 12611266.
HUANG Changlin, TAN Jianrong, ZHANG Shuyou, et al. Multilevel configuration design method for complicated engineeringtoorder product [J].Computer Integrated Manufacturing System, 2007,13(7): 12611266.
[14] FRIEDRICH G, STUMPTNER M. Consistencybased configuration [EB/OL]. [19990315]. http:∥www.aaai.org/Papers/Workshops/1999/WS9905/WS9905007.pdf.
[15] FREUDER E C, LIKITVATANAVONG C, MORETTI M, et al. Computing explanations and implications in preference based configuration [M]∥ Lecture notes in computer science. Berlin: Springer, 2003: 315336.
[16] WANG Shiwei, TAN Jianrong, ZHANG Shuyou. Casebased product configuration and reuse in mass customization[J]. Chinese Journal of Mechanical Engineering, 2004, 17(2): 233236.
[17] 刘晓冰,董建华.产品配置中相似实例模糊优选法的研究[J].高技术通讯,2003,13 (2): 6569.
LIU Xiaobing, DONG Jianhua. Research on application of fuzzy optimum selection in product configuration[J]. Chinese High Technology Letters, 2003, 13(2): 6569.
[18] LIN Chaohung, LEE Tongyee. Metamorphosis of 3D polyhedral models using progressive connectivity transformation [J]. IEEE Transactions on Visualization and Computer Graphics, 2005, 11(1): 212.
[19] 周佳立,张树有.基于拓扑约束释放与重构的变结构设计技术研究[J].中国机械工程,2007, 18(16): 19431949.
ZHOU Jiali, ZHANG Shuyou. Research on design process of deform structure based on the release and restructure of topology restriction [J]. China Mechanical Engineering, 2007,18(16): 19431949.
[20] 杨煜俊,陈新度,陈新,等.可视化产品配置技术的研究与实现[J].机床与液压,2007, 35(5): 1617.
YANG Yujun, CHEN Xindu, CHEN Xin, et al. Research and realization for visual product configuration technology [J]. Machine Tool and Hydraulics, 2007,35(5): 1617.
[21] 杨海成,廖文和.基于知识的三维CAD技术及应用[M].北京:科学出版社,2005: 2223.
[22] 柴立和.多尺度科学的研究进展[J].化学进展,2005,17(2): 186191.
CHAI Lihe. Recent progress of multiscale science [J]. Progress in Chemistry, 2005,17(2): 186191.
[23] 钟掘.复杂机电系统耦合设计理论与方法[M].北京:机械工业出版社,2007: 95104.
[24] 文成林,周东华.多尺度估计理论及其应用[M].北京:清华大学出版社,2002: 115122. |