Please wait a minute...
J4  2009, Vol. 43 Issue (10): 1864-1869    DOI: 10.3785/j.issn.1008-973X.2009.10.021
工业工程与制造业信息化     
电子制造供应链采购任务分配
祝勇,潘晓弘,王正肖
(浙江大学 现代制造工程研究所,浙江省先进制造技术重点研究实验室,浙江 杭州 310027)
Purchasing tasks allocation in electronics manufacturing supply chain
ZHU Yong, PAN Xiao-hong, WANG Zheng-xiao
(Institute of Manufacturing Engineering, Zhejiang Province Key Laboratory of Advanced Manufacturing Technology, Zhejiang University, Hangzhou 310027,China)
 全文: PDF(1344 KB)   HTML
摘要:

为了能在多供应商之间分配采购任务使双方整体效益达到最优,结合电子制造业典型特点和多供应商环境下电子元器件采购特征,提出了4种不同类型的供应商协作模式:连续补给型、一般协作型、订货供给型和紧密协作型.主要针对一般协作型、订货供给型和紧密协作型3种类型供应商,采用两种不同的任务分配策略:成本优先控制策略和交货期优先控制策略,分别建立电子制造供应链采购任务分配模型,同时考虑产品总的采购成本,基于两种分配策略构造了采购任务分配算法.通过计算一个实例来验证采购任务分配模型和说明该算法是如何求解问题的,结果表明,准时交货率得到最大保证,而成本得到有效降低.

Abstract:

To allocate purchasing tasks among multiple suppliers for obtaining lowest total cost by combining features of purchasing electronic components under multiple suppliers environment and typical features in electronics manufacturing, four types of supplier coordination pattern were proposed: continuous replenishment, ordinary cooperation, supply orders and close cooperation. According to these suppliers, two allocation patterns considering cost or delivery date as top priority were proposed. Two models of purchasing tasks allocation in electronics manufacturing supply chain considering the total cost of products were constructed, and corresponding algorithms were constructed based on the two predetermined policy. Then a practical application verified the model of purchasing tasks allocation and illuminated this algorithm. Results showed the maximum guarantee of delivery rate on time and the cost-effectiveness of this strategy.

出版日期: 2009-11-29
:  TP 391  
基金资助:

国家“863”高技术研究发展计划资助项目(2009AA04Z151);浙江省重大科技攻关资助项目(2006C11237).

通讯作者: 潘晓弘,男,教授.     E-mail: pan_xh@zju.edu.cn
作者简介: 祝勇(1979- ),男,江苏泰兴人,博士生,从事供应链管理、生产管理、工业工程等研究.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

祝勇, 潘晓弘, 王正肖. 电子制造供应链采购任务分配[J]. J4, 2009, 43(10): 1864-1869.

CHU Yong, BO Xiao-Hong, WANG Zheng-Xiao. Purchasing tasks allocation in electronics manufacturing supply chain. J4, 2009, 43(10): 1864-1869.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2009.10.021        http://www.zjujournals.com/eng/CN/Y2009/V43/I10/1864

[1] LOU P, ZHOU Z D, CHEN Y P, et al. Negotiation-based task allocation in an open supply chain environment [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006, 220(6): 975985.
[2] 关志民,周宝刚,马钦海. 多产品采购条件下的供应商选择与订购量分配问题研究[J]. 计算机集成制造系统:CIMS, 2005, 11(11): 16261632.
GUAN Zhi-min, ZHOU Bao-gang, MA Qin-hai. Research on vendor selection and order quantity allocation problem under multi-product purchases [J]. Computer Integrated Manufacturing Systems, 2005, 11(11): 16261632.
[3] KAWTUMMACHAI R, VAN HOP N. Order allocation in a multiple-supplier environment [J]. International Journal of Production Economics, 2005, 93-94: 231238.
[4] DAHEL N E. Vendor selection and order quantity allocation in volume discount environments [J]. Supply Chain Management: An International Journal, 2003, 8(4): 335342.
[5] 黄爱华,叶飞. 虚拟企业的任务分配与协调技术[J]. 华南理工大学学报: 自然科学版, 2002, 30(5): 14.
HUANG Ai-hua, YE Fei. Task allocation and harmonizing of virtual enterprise [J]. Journal of South China University of Technology: Natural Science, 2002, 30(5): 14.
[6] 刘海龙,吴铁军. 基于合同网的多agent任务分配分布式优化算法[J]. 浙江大学学报: 工学版, 2001, 35(5): 550554.
LIU Hai-long, WU Tie-jun. Distributed algorithm for task allocation in multi-agent system based on contract net [J]. Journal of Zhejiang University: Engineering Science, 2001, 35(5): 550554.
[7] 谢经明,娄平,陈幼平,等. 供应链中基于多Agent协商的任务分配机制的研究[J]. 中国机械工程, 2005, 16(21): 19111915.
XIE Jing-ming, LOU Ping, CHEN You-ping, et al. Research on mechanism of task allocation in based on multi-agent negotiation supply chain [J]. China Mechanical Engineering, 2005, 16(21): 19111915.

[1] 赵建军,王毅,杨利斌. 基于时间序列预测的威胁估计方法[J]. J4, 2014, 48(3): 398-403.
[2] 张天煜, 冯华君, 徐之海, 李奇, 陈跃庭. 基于强边缘宽度直方图的图像清晰度指标[J]. J4, 2014, 48(2): 312-320.
[3] 刘中, 陈伟海, 吴星明, 邹宇华, 王建华. 基于双目视觉的显著性区域检测[J]. J4, 2014, 48(2): 354-359.
[4] 崔光茫, 赵巨峰, 冯华君, 徐之海, 李奇, 陈跃庭. 非均匀介质退化图像快速仿真模型的建立[J]. J4, 2014, 48(2): 303-311.
[5] 王相兵,童水光,钟崴,张健. 基于可拓重用的液压挖掘机结构性能方案设计[J]. J4, 2013, 47(11): 1992-2002.
[6] 王进, 陆国栋, 张云龙. 基于数量化一类分析的IGA算法及应用[J]. J4, 2013, 47(10): 1697-1704.
[7] 胡根生,鲍文霞,梁栋,张为. 基于SVR和贝叶斯方法的全色与多光谱图像融合[J]. J4, 2013, 47(7): 1258-1266.
[8] 刘羽, 王国瑾. 以已知曲线为渐进线的可展曲面束的设计[J]. J4, 2013, 47(7): 1246-1252.
[9] 吴金亮, 黄海斌, 刘利刚. 保持纹理细节的无缝图像合成[J]. J4, 2013, 47(6): 951-956.
[10] 陈潇红,王维东. 基于时空联合滤波的高清视频降噪算法[J]. J4, 2013, 47(5): 853-859.
[11] 朱凡,李悦,蒋 凯,叶树明,郑筱祥. 基于偏最小二乘的大鼠初级运动皮层解码[J]. J4, 2013, 47(5): 901-905.
[12] 吴宁, 陈秋晓, 周玲, 万丽. 遥感影像矢量化图形的多层次优化方法[J]. J4, 2013, 47(4): 581-587.
[13] 计瑜,沈继忠,施锦河. 一种基于盲源分离的眼电伪迹自动去除方法[J]. J4, 2013, 47(3): 415-421.
[14] 王翔,丁勇. 基于Gabor滤波器的全参考图像质量评价方法[J]. J4, 2013, 47(3): 422-430.
[15] 童水光, 王相兵, 钟崴, 张健. 基于BP-HGA的起重机刚性支腿动态优化设计[J]. J4, 2013, 47(1): 122-130.