[1] HUANG L, YAO W, LU Z. Interleaved totem-pole bridgeless PFC rectifier with ZVS and low input current ripple[C]//2015 Energy Conversion Congress and Exposition. Montreal:IEEE, 2015:166-171
[2] KIM Y S, SUNG W Y, LEE B Y. Comparative performance analysis of high density and efficiency PFC topologies[J]. IEEE Transactions on Power Electronics, 2014, 29(6):2666-2679.
[3] SU B, LU Z. An interleaved totem-pole boost bridgeless rectifier with reduced reverse-recovery problems for power factor correction[J]. IEEE Transactions on Power Electronics, 2010, 25(6):1406-1415.
[4] O'GRADY M, ZHU K, DODGE J, et al. Active switch impact on CCM totem-pole PFC efficiency[C]//2017 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy Mangement. Nuremberg:IEEE, 2017:1-6.
[5] 王议锋, 徐殿国, 徐博, 等. 图腾柱式无桥零纹波交错并联Boost功率因数校正器[J]. 电工技术学报, 2011, 26(9):175-182 WANG Yi-feng, XU Dian-guo, XU Bo, et al. An interleaved totem-Pole bridgeless boost PFC rectifier with zero-ripple current filter[J]. Transactions of China Electrotechnical Society, 2011, 26(9):175-182
[6] HUBER L, IRVING B T, JOVANOVIC M M. Open-loop control methods for interleaved DCM/CCM boundary boost PFC converters[J]. IEEE Transactions on Power Electronics, 2008, 23(4):1649-1657.
[7] HUBER L, IRVING B T, JOVANOVIC M M. Open-loop control methods for interleaved DCM/CCM boundary boost PFC converters[J]. Power Electronics, IEEE Transactions on, 2008, 23(4):1649-1657.
[8] HUBER L, IRVING B T, JOVANOVIC M M. Review and stability analysis of PLL-based interleaving control of DCM/CCM boundary boost PFC converters[J]. IEEE Transactions on Power Electronics, 2009, 24(8):1992-1999.
[9] SU B, ZHANG J, LU Z. Totem-pole boost bridgeless PFC rectifier with simple zero-current detection and full-Range ZVS operating at the boundary of DCM/CCM[J]. IEEE Transactions on Power Electronics, 2011, 26(2):427-435.
[10] BIELA J, HASSLER D, MINIBOCK J, et al. Optimal design of a 5kW/dm398.3% efficient TCM resonant transition single-phase PFC rectifier[C]//2010 Inrenational Power Electronics Conference. Sapporo:IEEE, 2010:1709-1716
[11] KIM J W, CHOI S M, KIM K T. Variable on-time control of the critical conduction mode boost power factor forrection converter to improve zero-crossing distortion[C]//2005 International Conference on Power Electronics and Drives Systems. Kuala Lumpur:IEEE, 2005:1542-1546
[12] SUULLIVAN C R, BOUAYAD H, SONG Y. Inductor design for low loss with dual foil windings and quasi-distributed gap[C]//2013 Energy Conversion Congress and Exposition. Danver:IEEE, 2013:3693-3699
[13] ACKERMANN B, LEWALTER A. Two-dimensional calculation of winding losses in planar magnetic components[C]//2001 International Conference on Power Electronics and Drive Systems. Denpasar:IEEE, 2001:674-679 |