[1] KUTLU A C, EKMEKÇIOLU M. Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP[J]. Expert Systems with Applications, 2012,39(1):61-67.
[2] LIU H C, LIU L, LI P. Failure mode and effects analysis using intuitionistic fuzzy hybrid weighted Euclidean distance operator[J]. International Journal of Systems Science, 2014, 45(10):2012-2030.
[3] SONG W, MING X, WU Z, et al. A rough TOPSIS approach for failure mode and effects analysis in uncertain environments[J]. Quality & Reliability Engineering International, 2014, 30(4):473-486.
[4] LIU H C, LIU L, LIU N. Risk evaluation approaches in failure mode and effects analysis:a literature review[J]. Expert Systems with Applications, 2013, 40(2):828-838.
[5] SAFARI H, FARAJI Z, MAJIDIAN S. Identifying and evaluating enterprise architecture risks using FMEA and fuzzy VIKOR[J]. Journal of Intelligent Manufacturing, 2016, 27(2):475-486.
[6] ZHAO H, YOU J X, LIU H C. Failure mode and effect analysis using MULTIMOORA method with continuous weighted entropy under interval-valued intuitionistic fuzzy environment[J]. Soft Computing, 2016:1-13.
[7] 王晓暾,熊伟.基于DLOWG算子的FMEA风险评估方法[J].浙江大学学报:工学版,2012,46(1):182-188. WANG Xiao-tun, XIONG Wei. Risk evaluation method in FMEA based on dependent linguistic ordered weighted geometric operator[J]. Journal of Zhejiang Univer-sity:Engineering Science, 2012, 46(1):182-188.
[8] CHANG K H. Generalized multi-attribute failure mode analysis[J]. Neurocomputing, 2015, 175:90-100.
[9] LIU H C, LIU L, BIAN Q H, et al. Failure mode and effects analysis using fuzzy evidential reasoning approach and grey theory[J]. Expert Systems with Applications, 2011, 38(4):4403-4415.
[10] 安相华,于靖博,蔡卫国.基于混合多属性决策和关联分析的模糊粗糙FMEA评估方法[J].计算机集成制造系统,2016,22(11):2613-2621. AN Xiang-hua, YU Jing-bo, CAI Wei-guo. Fuzzy rough FMEA evaluation method based on hybrid multi-attribute decision and correlative analysis[J]. Computer Integrated Manufacturing Systems, 2016,22(11):2613-2621.
[11] 王浩伦,徐翔斌,甘卫华.基于三角模糊软集的FMEA风险评估方法[J].计算机集成制造系统,2015,21(11):3054-3062. WANG Hao-lun, XU Xiang-bin, GAN Wei-hua. Risk evaluation method in FMEA based on triangular fuzzy soft set[J]. Computer Integrated Manufacturing Systems, 2015, 21(11):3054-3062.
[12] 耿秀丽,张永政.基于犹豫模糊集的改进FMEA风险评估方法[J].计算机集成制造系统,2017,23(2):340-348. GENG Xiu-li, ZHANG Yong-zheng. Improved FMEA approach for risk evaluation based on hesitant fuzzy set[J]. Computer Integrated Manufacturing Systems, 2017, 23(2):340-348.
[13] 徐泽水.AHP中两类标度法的关系研究[J].系统工程理论与实践,1999,19(7):97-101. XU Ze-shui. Research on the relationship between the two kinds of scaling method in AHP[J]. System Engineering Theory and Practice,1999,19(7):97-101.
[14] XIA M M, XU Z S, LIAO H C. Preference relations based on intuitionistic multiplicative information[J]. IEEE Transactions on Fuzzy Systems, 2013, 21(1):113-133.
[15] VAHDANI B, SALIMI M, CHARKHCHIAN M. A new FMEA method by integrating fuzzy belief structure and TOPSIS to improve risk evaluation process[J]. International Journal of Advanced Manufacturing Technology, 2015, 77(1-4):357-368.
[16] BRAGLIA M. MAFMA:multi-attribute failure mode analysis[J]. International Journal of Quality & Reliability Management, 2000, 17(9):1017-1033.
[17] TSAI T N, YEH J H. Identification and risk assessment of soldering failure sources using a hybrid failure mode and effect analysis model and a fuzzy inference system[J]. Journal of Intelligent & Fuzzy Systems, 2015, 28(6):2771-2784.
[18] CHANG K H, CHENG C H. Evaluating the risk of failure using the fuzzy OWA and DEMATEL method[J]. Journal of Intelligent Manufacturing, 2011,22(2):113-129.
[19] WANG X F, ZHANG Y Z, SHEN G X. An improved FMECA for feed system of CNC machining center based on ICR and DEMATEL method[J]. International Journal of Advanced Manufacturing Technology, 2016, 83(1-4):43-54.
[20] EKMEKÇIOLU M, KUTLU A C. A fuzzy hybrid approach for fuzzy process FMEA:an application to a spindle manufacturing process[J]. International Journal of Computational Intelligence Systems, 2012, 5(4):611-626.
[21] 华小义,谭景信.基于"垂面"距离的TOPSIS法——正交投影法[J].系统工程理论与实践,2004, 24(1):114-119. HUA Xiao-yi, TAN Jing-xin. Revised TOPSIS method based on vertical projection distance-vertical projection method[J]. System Engineering Theory and Practice, 2004, 24(1):114-119.
[22] 刘小弟,朱建军,刘思峰.犹豫模糊信息下的双向投影决策方法[J].系统工程理论与实践,2014(10):2637-2644. LIU Xiao-di, ZHU Jian-jun, LIU Si-feng. Bidirectional projection method with hesitant fuzzy information[J]. System Engineering Theory and Practice, 2014(10):2637-2644.
[23] 张世涛,朱建军,刘小弟.基于重要度引导偏好识别修正的多粒度语言共识模型[J].控制与决策,2015(9):1609-1616. ZHANG Shi-tao, ZHU Jian-jun, LIU Xiao-di. Multi-granularity linguistic consensus model based on preferences identification and correction guided by importance degree[J]. Control and Decision, 2015(9):1609-1616.
[24] JIANG Y, XU Z S, GAO M. Methods for ranking intuitionistic multiplicative numbers by distance measures in decision making[J]. Computers & Industrial Engineering, 2015, 88(C):100-109.
[25] XU Z S. Models for multiple attribute decision making with intuitionistic fuzzy information[J]. International Journal of Uncertainty Fuzziness and Knowledge-Based Systems, 2011, 15(3):285-297. |