［1］ 邹冀华, 刘志存, 范玉青. 大型飞机部件数字化对接装配技术研究［J］. 计算机集成制造系统, 2007, 13(7): 1367-1373.
ZHOU Ji-hua, LIU Zhi-cun, FAN Yu-qing. Large-size airplane parts digital assembly technology ［J］. CIMS, 2007, 13(7): 1367-1373.
［2］ ESTLER W T, EDMUNDSON K L, PEGGS G N, et al. Large-scale metrology: an update ［J］. R Annal, 2002, 51(2): 587-609.
［3］ ARUN K S, HUANG T S, BLOSTEIN S D. Least-squares fitting of two 3-D point sets ［J］. IEEE Transaction on Pattern Analysis and Machine Intelligence, 1987, 9(5): 698-700.
［4］ UMEYAMA S. Least-square estimation of transformation parameters between two point patterns ［J］. IEEE Transaction on Pattern Analysis and Machine Intelligence, 1991, 13(4): 376-380.
［5］ BERTHOLD K P H. Closed-form solution of absolute orientation using unit quaternions ［J］, Journal of the Optical Society of America A, 1988, 4(4): 629-643.
［6］ BERTHOLD K P H, HUGH M H, NEGAHDARIPOUR S. Closed-form solution of absolute orientation using orthonormal matrices ［J］. Journal of the Optical Society of America A, 1988, 5(7): 1127-1137.
［7］ 耿娜, 邾继贵, 劳达宝, 等. 基于刚体运动学的坐标系配准理论及算法［J］. 传感技术学报, 2010, 23(8): 1088-1092.
GENG Na, ZHU Ji-gui, LAO Da-bao, et al. Theory and algorithm of coordinate system registration based on rigid body kinematics ［J］. Chinese Jornal of Sensors and Actuators, 2010, 23(8): 1088-1092.
［8］ 张春富, 张军, 唐文彦,等. 一种基于模式搜索的大尺寸测量移站坐标转换方法［J］. 计测技术, 2003, 23(6): 12-14.
ZHANG Chun-fu, ZANG Jun, TANG Wen-yan, et al. A coordinate transformation method of moving the station of large scale measurement based on mode searching ［J］. Aviation Metrology and Measurement Technology, 2003, 23(6): 12-14.
［9］ JOSEPH M C, ROBERT J S. A practical method for evaluating measurement system uncertainty ［C］∥Boeing Large Metrology Conference. Long Beach: ［s. n.］, 2000.
［10］ CALKINS J M. Quantifying coordinate uncertainty fields in coupled spatial measurement systems ［D］. Blacksburg: Virginia Polytechnic Institute and State University, 2002.
［11］ MITCHELL J, SPENCE A, HOANG M, et al. Sensors fusion of laser tracker for use in large-scale precision metrology ［J］. Proceeding of SPIE Intelligent Manufacturing, 2004, 5263: 57-65.
［12］张福民,曲兴华,叶声华.大尺寸测量中多传感器的融合［J］.光学精密工程, 2008, 16(7): 1236-1240.
ZHANG Fu-min, QU Xing-hua, YE SHENG-hua. Multiple sensor fusion in large scale measurement ［J］. Optics and Precision Engineering, 2008, 16(7): 1236-1240.
［13］ 张福民, 曲兴华, 叶声华. 基于蒙特卡罗仿真方法的大尺寸测量不确定度分析［J］. 计算机集成制造系统, 2009, 15(1): 184-196.
ZHANG Fu-min, QU Xing-hua, YE Sheng-hua. Uncertainty analysis in large-scale measurement based on Monte Carlo simulation method ［J］. CIMS, 2009, 15 (1): 184-196.
［14］ 张福民,曲兴华,戴建芳,等.一种现场大尺寸测量精度的评价方法［J］. 光学学报, 2008, 28(11): 2159-2163.
ZHANG Fu-min, QU Xing-hua, DAI Jian-fang, et al. A method of precision evaluation for field large-scale measurement ［J］. Acta Optica Sinica, 2008, 28(11): 2159-2163.
［15］ PREDMORE C R. Bundle adjustment of multi-position measurements using the Mahalanobis distance ［J］. Precision Engineering, 2010, 34(1): 113-123.
［16］ 张春富, 张军, 许文海, 等. 激光跟踪仪现场测量不确定度的评定［J］. 计量学报, 2005, 26(1): 20-22.
ZHANG Chun-fu, ZHANG Jun, XU Wen-hai, et al. Evaluation of site measuring uncertainty of laser tracker ［J］. Acta Metrology Sinica, 2005, 26(1): 20-22.
［17］ 林嘉睿, 邾继贵, 郭寅, 等. 现场大空间测量中精密三维坐标控制网的建立［J］. 机械工程学报, 2012, 48(4): 6-11.
LIN Jia-rui, ZHU Ji-gui, GUO Yin, et al. Establishment of precise three-dimensional coordinate control network in field large-space measurement ［J］. Journal of Mechanical Engineering, 2012, 48(4): 6-11.
［18］ DANILCHENKO A, FITZPATRICK J M. General approach to error prediction in point registration ［C］ ∥SPIE Medical Imaging International Society for Optics and Photonics. San Diego: ［s. n.］, 2010.
［19］ WEST J B, FITZPATRICK J M. The distribution of target registration error in rigid-body point-based registration ［J］. IEEE Transactions on Medical Imaging, 2001, 20(9): 917-927.