Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (4): 698-704    DOI: 10.3785/j.issn.1008-973X.2013.04.021
    
Influence from force perturbation to position demodulation in  self-sensing active magnetic bearing
TANG Ming, ZHU Chang-sheng
College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

A detailed analysis on the frequency characteristics of current ripple was proposed in both time domain and frequency domain in order to analyze the influence mechanism of force perturbation on position demodulation in self-sensing active magnetic bearings (AMBs) system. Fourier series, Jacobi-Anger identity, and the first kind of Bessel function were used based on the modulation principle of a current mode switching power amplifier with a fixed switching frequency. Theoretical analysis shows that the time-varying duty cycle introduced by the force perturbation causes innumerable side frequency around switching frequency of current ripple frequency spectrum. The amplitude of each side frequency is given by the first kind of Bessel function, and the frequency interval depends on the changing frequency of duty cycle. Experiments held on the AMBs platform verified the theoretical analysis.

Published: 01 April 2013
CLC:  TP 23  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

TANG Ming, ZHU Chang-sheng. Influence from force perturbation to position demodulation in  self-sensing active magnetic bearing. J4, 2013, 47(4): 698-704.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2013.04.021     OR     http://www.zjujournals.com/eng/Y2013/V47/I4/698


力扰动对无传感器电磁轴承位移解调的影响

为了研究外力扰动对无传感器电磁轴承位移解调的影响机制,从电流型恒频开关功率放大器的调制原理出发,利用傅里叶级数、雅可比-安格尔恒等式、第一类贝塞尔函数等数学工具,在时域和频域内分析力扰动对电流纹波信号幅频特性的影响.理论分析表明,力扰动所引发的时变占空比会使电流纹波的开关频率处的谱线附近产生无数边频分量,各边频分量的幅值由第一类贝塞尔函数确定,边频分量间的频率间隔取决于占空比的变化频率.在电磁轴承系统平台进行相关实验,实验结果证明了理论分析的正确性.

［1］ MASLEN E H. Self-sensing for active magnetic bearings: overview and status ［C］∥ Proceedings of the 10th International Symposium on Magnetic Bearings. Martigny: ［s. n.］, 2006: 10-15.

［2］ VISCHER D. Sensorlose und spannungsgesteuerte magnetlager ［D］. Zurich Switzerland: Swiss Federal Institution Technology, 1988.

［3］ VISCHER D, BLEULER H. A new approach to sensorless and voltage controlled AMBs based on network theory concepts ［C］∥ Proceedings of the 2nd International Symposium on Magnetic Bearings. Tokyo: ［s. n.］, 1990: 301-306.

［4］ SIVADASAN K K. Analysis of self-sensing active magnetic bearings working on inductance measurement principle ［J］. IEEE Transactions on Magnetics, 1996, 32(2): 329-334.

［5］ GARCIA P, GUERRERO J M, EL-SAYED I, et al. Carrier signal injection alternatives for sensorless control of active magnetic bearings ［C］∥ 2010 1st Symposium on Sensorless Control for Electrical Drives (SLED). Padova: ［s. n.］, 2010: 78-85.

［6］ 王军. 无传感器磁悬浮轴承的研究［D］. 南京: 南京航空航天大学, 2005.

WANG Jun. Research on self-sensing active magnetic bearing ［D］. Nanjing: Nanjing University of Aeronautics and Astronautics, 2005.

［7］ 叶建民. 自检测电磁轴承转子的位移检测研究［J］.科技创业，2008, 12(12): 196197.

YE Jian-min. Research on rotor displacement of self-sensing active magnetic bearing ［J］. Technology and Entrepreneurship, 2008, 12(12): 196-197.

［8］ MASLEN E H, IWASAKI T, MAHMOODIAN R. Formal parameter estimation for self-sensing ［C］∥ Proceedings of the 10th International Symposium on Magnetic Bearings. Martigny: ［s. n.］, 2006: 529-536.

［9］ OKADA Y, MATSUDA K, NAGAI B. Sensorless magnetic levitation control by measuring the PWM carrier frequency component ［C］∥ Proceedings of the 3rd International Symposium on Magnetic Bearings. Virginia: ［s. n.］, 1992: 183-196.

［10］ SCHAMMASS A, HERZOG R, BUHLER P, et al. New results for self-sensing active magnetic bearings using modulation approach ［J］. IEEE Transactions on Control Systems Technology, 2005, 13(4): 509-516.

［11］ NOH D. Self-sensing magnetic bearings driven by a switching power amplifier ［D］. Virginia: University of Virginia, 1997.

［12］ MONTIE D T. Performance limitations and self-sensing magnetic bearings ［D］. Virginia: University of Virginia, 2003.

［13］ TANG M, ZHU C. New method of position estimation for self-sensing active magnetic bearings based on artificial neural network ［C］∥ 2010 International Conference on Electrical and Control Engineering (ICECE). Wuhan: ［s. n.］, 2010: 1355-1358.

［14］ GARCIA P, GUERRERO J M, BRIZ F, et al. Sensorless control of three-pole active magnetic bearings using saliency-tracking-based methods ［J］. IEEE Transactions on Industry Applications, 2010, 46(4): 1476-1484.

［15］ GARCIA P, GUERRERO J M, EL-SAYED MAHMOUD I, et al. Impact of saturation, current command selection, and leakage flux on the performance of sensorless-controlled three-pole active magnetic bearings ［J］. IEEE Transactions on Industry Applications, 2011, 47(4): 1732-1740.
[1] ZHANG Shuai, FENG Dong-qin, CHU Jian. Probability-based clock synchronization for EPA-wireless protocol[J]. J4, 2014, 48(4): 0-00.
[2] TANG Ming, ZHU Chang-sheng. Research of self-sensing active magnetic bearings based on duty cycle compensation[J]. J4, 2013, 47(8): 1418-1423.
[3] CAO Wei-Hua, LI Meng-Yang, CHEN Xin, TUN Min. Novel high-efficient charge controller in independent photovoltaic system[J]. J4, 2010, 44(7): 1260-1265.