Please wait a minute...
J4  2010, Vol. 44 Issue (2): 385-392    DOI: 10.3785/j.issn.1008-973X.2010.02.032
    
Non-contacting suspended temperature measuring device
RUAN Xiao-dong, CUI Xun-bo, ZOU Jun, ZHONG Wei-hua, CHEN Shui-xuan, FU Xin
(State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China)
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

 A non-touching temperature device was developed based on air cushion aiming at the problems that the temperature measurement was easily disturbed by cooling water and vapor in laminar cooling region. The relations between the structural parameters, e.g. distance, area of lower surface and groove depth, and the suspending force of the nozzle and the pressure distribution on the surface of the strip were investigated by computational fluid dynamics (CFD). The effects of viscosity damping coefficient on response and stability were analyzed by dynamics models. The basic system parameters were determined. The developed device has the good self-adjusting ability for the distance and can stably suspend on the strip surface. The good performance was verified by the application of the device in the laminar cooling physical simulation system, in spite of the interference of cooling water, high speed moving and vibration of the target object.



Published: 09 March 2010
CLC:  TH 137  
Cite this article:

RUAN Xiao-Dong, CUI Xun-Bei, JU Dun, et al. Non-contacting suspended temperature measuring device. J4, 2010, 44(2): 385-392.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2010.02.032     OR     http://www.zjujournals.com/eng/Y2010/V44/I2/385


非接触式悬浮测温装置仿真与试验研究

针对层流冷却区温度测量易受冷却水、雾气干扰的问题,利用喷射的气体产生的气垫效应,开发了非接触式悬浮测温装置.采用计算流体力学(CFD)方法研究间距、喷嘴下缘面积和均压槽深度等关键结构参数对喷嘴受力、带钢表面气体压力分布的影响,通过动力学仿真研究黏性阻尼系数对悬浮的响应速度、稳定性的影响,并确定了非接触式测温装置的基本系统参数.开发的非接触式悬浮测温装置具有良好的间距自调节能力,能够稳定地悬浮在带钢表面.将该装置应用到某钢厂层流工况物理模拟系统中,结果表明,在冷却水扰动、被测物体高速移动和振动的恶劣工况下,该装置仍能取得满意的测量效果.

[1]  片锦香,柴天佑,贾树晋.层流冷却系统过程优化控制仿真实验平台[J].系统仿真学报,2007,19(24): 56675671.
PIAN Jin-xiang, CHAI Tian-you, JIA Shu-jin. Simulation platform for optimal control of laminar cooling system \
[J\]. Journal of System Simulation, 2007, 19(24): 56675671.
[2] XIE H B, JIANG Z Y. Prediction of coiling on run-out table of hot strip mill using data mining[J]. Journal of Materials Processing Technology, 2006, 177(1-3): 121125.
[3] REMN M G. Modeling and simulation of run-out table cooling control using feedforward-feedback and element tracking system[J]. Transactions on Industry Application, 1997, 33(2): 304311.
[4] KUMAR R K, SINHA S K. An on-line parallel controller for the run-out table of hot strip mills[J].Transactions on Control Systems Technology, 2001, 9(4): 821830.
[5] 金兹伯格VB.板带轧制工艺学[M].北京:冶金工业出版社,1998: 320344.
[6] 张剑慈,崔宝玲,李昳,等.开式离心叶轮内部流道的数值模拟[J].机械工程学报,2006,42(4): 3741.
ZHANG Jian-ci, CUI Bao-ling, LI Yi, et al. Numerical value simulation of inner flown channel of the open centrifugal impeller[J]  Chinese Journal of Mechanical Engineering, 2006, 42(4): 3741.
[7] KARL J ,BJRN W. 计算机控制系统理论与设计[M]. 北京: 清华大学出版社, 2002: 6991.

[1] DING Chuan, DING Fan, ZHOU Xing, MAN Zai-peng, YANG Can-jun. Design and comparative experimental study of novel pressure-resistant oil-immersed proportional actuator[J]. J4, 2014, 48(3): 451-455.
[2] SONG Yue-chao, XU Bing, YANG Hua-yong, ZHANG Jun-hui. Modified practical approximate method for testing source flow of  piston pump[J]. J4, 2014, 48(2): 200-205.
[3] MAN Zai-peng,DING Fan,DING Chuan,LIU Shuo,HUANG Ting-feng. Development and research overview on impulse test of hydraulic hose[J]. J4, 2014, 48(1): 21-28.
[4] SHI Hu, YANG Hua-yong, GONG Guo-fang, HOU Dian-qing. Definition and evaluation method for compliance of thrust hydraulic system for shield tunneling machine[J]. J4, 2013, 47(8): 1444-1449.
[5] HOU Dian-qing, GONG Guo-fang, SHI Hu, WANG Lin-tao. Design of new propulsion system of shield tunneling machine based on compliance characteristics [J]. J4, 2013, 47(7): 1287-1292.
[6] SHI Hu, YANG Hua-yong, GONG Guo-fang, WANG Lin-tao. Key technologies of shield tunneling machine and present  status and prospect of test rigs for tunneling simulation [J]. J4, 2013, 47(5): 741-749.
[7] WEI Jian-hua, GUO Kai, XIONG Yi. Synchronized motion control for multi-axis electro-hydraulic system of large equipment[J]. J4, 2013, 47(5): 755-760.
[8] HOU Dian-qing, GONG Guo-fang, SHI Hu, WANG Lin-tao. Compliance characteristics of propulsion system of
shield tunneling machine under sudden load
[J]. J4, 2013, 47(3): 522-527.
[9] ZHU Xu, WEI Jian-hua, FANG Jin-hui. Dynamic characteristics of pilot-operated electro-hydraulic
flow distribution system
[J]. J4, 2013, 47(2): 193-200.
[10] ZHANG Yan-ting, QU Ying-feng, LIU Zhen-dong, MA Jiang-tao. Design of swing device for crown-block heave compensation system[J]. J4, 2012, 46(12): 2268-2273.
[11] DU Heng, WEI Jian-hua, FENG Rui-lin. Modeling, simulation and experimental research
on pressure tracking valve
[J]. J4, 2012, 46(6): 1034-1040.
[12] FANG Jin-hui, WEI Jian-hua, KONG Xiao-wu. Synchronous control strategy for paralleled servo valves[J]. J4, 2012, 46(6): 1054-1059.
[13] MAN Jun , DING Fan , LI Qi-peng , DA Jing , SHAO Sen-yin. Study of high-pressure high-speed on-off solenoid using
permanent magnet shield
[J]. J4, 2012, 46(2): 309-314.
[14] GUAN Cheng, XU Xiao, LIN Xiao, WANG Shou-hong. Recovering system of swing braking energy in hydraulic excavator[J]. J4, 2012, 46(1): 142-149.
[15] HUANG Jia-hai,QIU Min-xiu,FANG Wen-min. Heat transfer in the gap of friction pairs in hydroviscous drive[J]. J4, 2011, 45(11): 1934-1940.