Please wait a minute...
浙江大学学报(工学版)
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)
Civil Engineering, Transportation Engineering     
Hoff theory based sandwich shell element for metal composite roof panel
HUANG Li1,2, DENG Hua2
1. Department of Real Estate and Engineering Management, Zhejiang University of Finance and Economics, Hangzhou 310018, China; 2. Space Structures Research Center, Zhejiang University, Hangzhou 310058, China
Download:   PDF(1081KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

Metal composite roof panel with polyurethane foam core is often used as the roof covering of large span structures. A simple and effective eight node rectangular sandwich shell element was established for the polyurethane foam sandwich panel based on the amended theory of the Hoff type sandwich panel. A rectangular roof panel was employed as an example. Layered solid elements, sandwich solid element and eight node rectangular sandwich shell element were respectively used to simulate the roof panel. Results reveal that the deformation form of the eight node rectangular element model is the same as the accurate layered solid element model, and their deformation values are similar. The basic vibration modes are as same as accurate layered solid element model, and vibration frequency is approximated. Results indicate that the sandwich shell element can effectively simulate the static and dynamic characteristic of polyurethane sandwich composite metal roof．

Published: 31 March 2016
CLC:  O 342  
  TU 393  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

HUANG Li, DENG Hua. Hoff theory based sandwich shell element for metal composite roof panel. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(1): 41-47.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2016.01.007     OR     http://www.zjujournals.com/eng/Y2016/V50/I1/41


基于Hoff理论的金属复合屋面板夹层壳单元

针对大跨度建筑屋盖结构常用的聚氨酯泡沫夹芯金属复合屋面板,根据修正后的Hoff型夹层板理论,建立简便、有效的八结点矩形夹层壳单元.以一块矩形屋面板为例,分别采用分层实体单元、夹层体单元和八结点矩形夹层壳单元模拟.数值结果显示,八结点矩形夹层壳单元模拟的屋面板在静荷载作用下的变形形式与精细的分层实体单元模型相同,且两者变形基本接近；基本振型与精细的分层实体单元模型相同,自振频率较接近.表明采用该夹层壳单元能够有效地模拟聚氨酯夹芯金属复合屋面板的静、动力特性.

［1］ 邓华, 黄莉, 王宸. 聚氨酯夹芯屋面板的风致动力性能分析［J］. 浙江大学学报: 工学版, 2013, 47(12): 2125-2131．
DENG Hua, HUANG Li, WANG Chen. Analysis on wind induced dynamic behaviors of polyurethane sandwich roof panels ［J］. Journal of Zhejiang University: Engineering Science, 2013, 47(12): 2125-2131．
［2］ 中国科学院力学研究所. 夹层板壳的弯曲、稳定和振动［M］. 北京: 科学出版社, 1977．
［3］ 黄莉, 邓华. 基于Hoff理论的金属复合屋面板基本方程［J］. 浙江大学学报: 理学版, 2015, 42(2): 147-152．
HUANG Li, DENG Hua. The fundamental equations of metal composite roof panel based on Hoff theory ［J］. Journal of Zhejiang University: Science Edition, 2015, 42(2): 147-152．
［4］ ZABARAS N, PERVEZ T. Viscos damping approximation of laminated anisotropic composite plates using the finite element method  ［J］. Computer Methods in Applied Mechanics and Engineering, 1990(81): 291-316．
［5］ 吴晖. 含压电致动器的四结点矩形复合材料夹层板单元［J］. 工程力学, 2004, 21(4): 156-161．
WU Hui. A four node rectangular element for composite sandwich plates with piezoelectric actuators ［J］. Engineering Mechanics, 2004, 21(4): 156-161．
［6］ 李大永,罗应兵,彭颖红,等. 实体壳单元及其在动力显式有限元方法中的应用［J］. 上海交通大学学报, 2006, 40(10): 1663-1666．
LI Da yong, LUO Ying bing, PENG Ying hong, et al. The solid shell element and its application in the dynamic explicit finite element method ［J］. Journal of Shanghai Jiaotong University, 2006, 40(10): 1663-1666．
［7］ MOREIRA R A S, RODRIGUES J D, FERREIRA A J M. A generalized layer wise finite element for multi layer damping treatments ［J］. Computational Mechanics, 2006, 37(5): 426-444．
［8］ VICTOR L. An asymptotic theory of sandwich plates ［J］. International Journal of Engineering Science, 2010, 48(3): 383-404．
［9］ 张波, 沈火明. 基于Matlab的壳体有限元分析［J］. 重庆理工大学学报: 自然科学, 2010, 24(12): 77-81．
ZHANG Bo, SHEN Huo ming. Finite element analysis of shell based on Matlab ［J］. Journal of Chongqing University of Technology: Natural Science, 2010, 24(12): 77-81．
［10］ 周学军, 张之峰. 压型钢板等效为正交各向异性板的有限元分析［J］. 钢结构, 2010, 25(8): 35-37．
ZHOU Xue jun, ZHANG Zhi feng. Finite element analysis of the corrugated steel sheet equated to orthotropic plate［J］. Steel Construction, 2010, 25(8): 35-37．
［11］ 黄莉, 邓华, 王宸. 金属复合屋面板用硬质聚氨酯泡沫的力学性能［J］. 建筑材料学报, 2014, 17(2): 320-325．
HUANG Li, DENG Hua, WANG Chen. Study on mechanical properties of rigid polyurethane foam core used in metal composite roof panels［J］. Journal of Building Materials, 2014, 17(2): 320-325．
[1] ZHENG Jian-yi, HE Wen, SHI Yan-bin. Eliminating residual stress in 45 steel quenching specimens
by electrical pulse[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2012, 46(8): 1407-1411.
[2] QIAO Hua, CHEN Wei-qiu. Multi-scale numerical simulation of structures
based on Arlequin method[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2010, 44(12): 2314-2319.