Please wait a minute...
浙江大学学报(工学版)
J4  2012, Vol. 46 Issue (8): 1419-1423    DOI: 10.3785/j.issn.1008-973X.2012.08.010
    
Multi-objective optimization method of spatial flexiblecomponent
based on orthogonal tests
ZHANG Lei, WU Yi-jie, WANG Bin, LIU Xiao-liang
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

To satisfy the rigidity, stability and other requirements of non-cylinder pinholes precision machining by the spatial flexiblecomponents and giant magnetostrictive material (GMM), the driven characteristics of GMM and multi-objective optimization of its performances were studied, such as the driving stiffness, torsional stiffness and first natural frequency. Then the main structural parameters of spatial flexible-components were analyzed which can influence each performances, and a kind of multi-objective optimization methods of flexible-components were given based on orthogonal test, finite element simulation and genetic algorithm. And through the orthogonal permutation and combination of the discrete values of main structural parameters, then get a mapping test table with finite element simulations. After each performance parameters and the main structural parameters optimization models were build by regression fitting method. The multi-objective of spatial flexible-component performances were optimized by the multi-objective genetic algorithm. Then a group of optimal solution of main structural parameters were got, and the bending deformation reached 51.6um, the torsional deformation was 3.3um, and first natural frequency was 849.7 Hz, which all met the driven characteristics of GMM and basic requirements of noncylinder pinholes precisely machining.

Published: 23 September 2012
CLC:  TP 271  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

ZHANG Lei, WU Yi-jie, WANG Bin, LIU Xiao-liang. Multi-objective optimization method of spatial flexiblecomponent
based on orthogonal tests. J4, 2012, 46(8): 1419-1423.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2012.08.010     OR     http://www.zjujournals.com/eng/Y2012/V46/I8/1419


基于正交建模的空间柔顺构件多目标优化

为满足超磁致伸缩材料精密加工异形孔的刚性、稳定性等要求,根据材料驱动特性对空间柔顺构件多个性能参数（驱动刚度、抗扭转刚度和一阶固有频率）进行优化设计,给出一种基于正交仿真试验和遗传算法的多目标优化方法.该方法通过主结构离散参数值的正交排列组合和有限元仿真获得两者的映射试验表,再采用回归拟合的方法建立各性能参数与主要结构参数的优化模型,经多目标遗传算法获得一组最优解,使柔顺构件弯曲变形量、扭转变形量、一阶固有频率分别为51.6 um、3.3 um、849.7 Hz,满足超磁致伸缩驱动特性和异形孔精密加工的要求.

［1］ SILVA F S. Fatigue on engine pistons a compendium of case studies ［J］. Engineering Failure Analysis, 2006, 13: 480-492.
［2］ 翟鹏,张承瑞,兰红波.车用高负荷活塞异形销孔结构发展趋势及加工技术研究［J］.汽车技术,2006,26(3): 39-43.
ZHAI Peng, ZHANG Chengrui,LAN Hongbo. Study on development trend and machining technology of oddshaped pinhole of automotive highload piston ［J］. Automobile Technology, 2006, 26(3): 39-43.
［3］ NEAL G P, MIN B K, PASEK Z J,et al. Integrated structural/control design of micropositioner for boring bar tool insert ［J］. Journal of Intelligent Material Systems and Structures, 2001, 12: 617-627.

［4］ DAI G L, HUI Y H, JIN K K. Design and manufacture of a carbon fiber epoxy rotating boring bar ［J］. Composite Structures, 2003, 60(1): 115-124.
［5］ HENRIK , TATIANA S, LARS H. Analysis of dynamic properties of boring bars concerning different clamping conditions ［J］. Mechanical Systems and Signal Processing, 2009, 23(8): 2629-2647.
［6］ MORADI H, BAKHTIARI N F, MOVAHHEDY M R. Tuneable vibration absorber design to suppress vibrations: An application in boring manufacturing process ［J］. Journal of Sound and Vibration, 2008, 318(1/2): 93-108.
［7］ 王姝歆,陈国平,周建华,等.复合型柔性铰链机构特性及其应用研究［J］.光学精密工程.2005,13(增刊): 91-97.
WANG Shuxin, CHEN Guopin, ZHOU Jianhua, et al. Compliant mechanisms consisted of compound flexible hinges and its applications ［J］.Optics and Precision Engineering, 2005, 13(suplement.): 91-97.
［8］ 李庆祥,王东生,李玉和.现代精密仪器设计［M］.北京:清华大学出版社,2004: 163-184.
［9］ 刘伟.单轴柔性铰链转角刚度的计算机辅助计算［J］.光学精密工程.2000,02(17)：178-180.
LIU Wei. Computer aided calculation of angle stiffness of single axis flexible hinge ［J］. Optics and Precision Engineering, 2000,02(17)： 178-180.
［10］ 白新桂.数据分析与试验优化设计［M］.北京:清华大学出版社,1986: 84-123.
［11］ 赵章荣,邬义杰,顾新建,等.基于遗传算法的超磁致伸缩执行器优化［J］.浙江大学学报:工学版, 2009, 43(1): 13-17.
ZHAO Zhangrong, WU Yijie, GU Xinjian,et al. Optimization for giant magnetostrictive actuator based on genetic algorithm ［J］. Journal of Zhejiang University: Engineering Science, 2009,43(1)： 13-17.
［12］ 王跃辉,王民.金属切削过程颤振控制技术的研究进展［J］.机械工程学报,2010,46（7）,166-174.
WANG Yuehui WANG Min. Advances on machining chatter suppression research ［J］.  Journal of Mechanical Engineering, 2010, 46(7): 166-174.
[1] YU Miao, WANG Jia-sen, QI Dong-lian. Output-feedback adaptive learning control with unknown control direction[J]. J4, 2013, 47(8): 1424-1430.
[2] CHEN Li, YANG Ying-chun. Emotional speaker recognition based on similar neighbor phenomenon[J]. J4, 2012, 46(10): 1790-1795.
[3] ZHANG Lei, WU Yi-jie, LI Jia-qi, WANG Bin, LIU Xiao-liang. Variable magnetic permeability self-sensing model of
GMM based on dynamic coil impedance measurement[J]. J4, 2011, 45(10): 1726-1731.
[4] HU Xu-xiao, PAN Xiao-hong, HE Wei, CHEN Gang. Step by step fitting algorithm for multi-order exponential function[J]. J4, 2010, 44(12): 2365-2369.
[5] BAI Han, GUAN Cheng. Robust adaptive dynamic surface control of electro-hydraulic
proportional system[J]. J4, 2010, 44(8): 1441-1448.
[6] BAI Han, GUAN Cheng, BO Shuang-Jia. Fuzzy decision based sliding mode robust adaptive control for bulldozer[J]. J4, 2009, 43(12): 2178-2185.