Please wait a minute...
J4  2012, Vol. 46 Issue (8): 1390-1396    DOI: 10.3785/j.issn.1008-973X.2012.08.006
    
Washout motion simulation in 6-DOF parallel platform based on Vortex
WEI Chun-yu, ZHOU Xiao-jun, WEI Yan-ding, TANG Fang
Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

In order to study Washout motion of the 6-DOF parallel platform during the vehicle driving, realize the co-simulation of vehicle dynamics model and 6-DOF platform model,a simulation method was proposed that the 6-DOF platform was modeled with Vortex multi-body dynamics software (Vortex) and the motion process of vehicle model was reappeared. The initial position and orientation of platform hydraulic cylinders were determined with analytical method, Washout algorithm of motion platform and kinematic inverse calculation were completed through Matlab/Simulink and were verified through the turn and linear motion simulation. The vehicle model built in Vortex was simulative driven on the given roads, relevant and continuous states of motion were formed based on the resolving results, the relevant dynamics parameters were filtered and kinematic inverse calculated, the elongations of hydraulic cylinders computed drove the 6-DOF platform to move. Results show that vehicle dynamics model and 6-DOF parallel platform model can be co-simulated and Washout motion of the platform can be visualized with Vortex.



Published: 23 September 2012
CLC:  TH 137TP 391.9  
Cite this article:

WEI Chun-yu, ZHOU Xiao-jun, WEI Yan-ding, TANG Fang. Washout motion simulation in 6-DOF parallel platform based on Vortex. J4, 2012, 46(8): 1390-1396.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2012.08.006     OR     http://www.zjujournals.com/eng/Y2012/V46/I8/1390


基于Vortex的6自由度平台洗出运动仿真

为了研究并联6自由度平台在车辆驾驶过程中的洗出运动,实现车辆动力学模型和6自由度运动平台模型的联合仿真,提出一种利用Vortex多体动力学软件对6自由度平台进行建模,复现车辆模型运动过程的仿真方法.平台液压油缸初始位姿采用解析法进行确定,在Matlab/Simulink中实现运动平台的洗出滤波算法和运动学反解算法,利用转弯和直线2种典型运动进行仿真验证.在给定路面上进行虚拟驾驶,Vortex车辆动力学模型解算结果使车辆产生相应的连续运动状态,相关动力学参数经过洗出滤波算法、平台运动学反解运算得到各油缸伸长量,驱动Vortex软件中建立的6自由度运动平台模型.结果表明,利用Vortex软件可以将车辆动力学模型和并联6自由度平台模型进行联合仿真,实现平台洗出运动的可视化.

[1] 陈聪,陈乐生.基于ADAMS的六自由度运动平台运动学分析[J].福州大学学报:自然科学版,2007,35(1): 70-75.
CHEN Cong, CHEN Lesheng. Kinematics of 6DOF motion platform based on ADAMS [J]. Journal of Fuzhou University: Natural Science, 2007,35(1): 70-75.
[2] 王宣银,刘荣,贾光政,等.车辆运动模拟6自由度平台的协同控制研究[J].机械工程学报,2004,40(4): 160-163.
WANG Xuanyin, LIU Rong, JIA Guangzheng, et al. Research on coordinated control of the six degrees of freedom vehicle motion simulator [J]. Chinese Journal of Mechanical Engineering,2004,40(4): 160-163.
[3] 董彦良,许彩霞,唐建林,等.6自由度平台的Washout滤波器设计及试验研究[J].机械工程学报,2010,46(3): 53-58.
DONG Yanliang, XU Caixia, TANG Jianlin, et al. Design and test research of washout filter for 6DOF platform [J]. Chinese Journal of Mechanical Engineering,2010,46(3): 53-58.
[4] 黄其涛,韩俊伟,何景峰.六自由度并联运动平台动力学建模及分析[J].机械科学与技术,2006,25(4): 382-385.
HUANG Qitao, HAN Junwei, HE Jingfeng. Dynamics modeling of a six degree of freedom parallel platform and its analysis [J]. Mechanical Science and Technology,2006,25(4): 382-385.
[5] 赵强,李洪人.六自由度运动平台的振动分析与测试[J].机械强度,2006,28(S): 17-21.
ZHAO Qiang, LI Hongren. Vibration analysis and test of a six degrees of freedom platform [J]. Journal of Mechanical Strength,2006,28(S): 17-21.
[6] 方艺,吴学杰.六自由度运动平台控制系统的神经网络优化[J].中国测试技术,2006,32(5): 100-103.
FANG Yi, WU Xuejie. Optimal control system of 6DOF motive platform based on neural network [J]. China Measurement Technology,2006,32(5): 100-103.
[7] KIM M S, MOON Y G, KIM G D. et al. Partial range scaling method based washout algorithm for a vehicle driving simulator and its evaluation [J]. International Journal of Automotive Technology,2010,11(2): 269-275.
[8] 王小亮,李立,张卫华.洗出位置对列车驾驶模拟器逼真度的影响研究[J].机械与电子,2007(4): 21-24.
WANG Xiaoliang,LI Li,ZHANG Weihua. Effect of washout locations on the fidelity of locomotive driving simulator [J].Machinery & Electronics,2007(4): 21-24.
[9] JIANG Hongzhou,HE Jingfeng,TONG Zhizhong. Characteristics analysis of joint space inverse mass matrix for the optimal design of a 6DOF parallel manipulator [J]. Mechanism and Machine Theory, 2010(45): 722-739.
[10] YAO Jianjun,FU Wei,HU Shenghai. Adaptive pose output decoupling for a hydraulicallydriven 6DOF parallel manipulator [J]. Journal of Vibration and Control,2010,17(9): 1417-1423.

No related articles found!