Please wait a minute...
J4  2011, Vol. 45 Issue (9): 1571-1575    DOI: 10.3785/j.issn.1008-973X.2011.09.010
    
Design of analog circuits in multi-bit quantized audio DAC
HAN Yan1, LIAO Lu1, HUANG Xiao-wei2, ZHANG Hao1, WANG Hao1
1. Department of Information Science and Electronic Engineering, Zhejiang University, Hangzhou 310027, China;
2. Institute of Microelectronic CAD, Hangzhou Dianzi University, Hangzhou 310018, China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

An analog circuit with high resolution and low power in a sigma-delta (Σ-Δ) digital-to-analog converter (DAC) was designed . By adopting 4-bit quantized technique,this DAC not only enhances the stability of the modulator, reduces the power consumption and the occupied area, but also reduces the system requirements for the back-end low-pass filter. Realizing methods of different modules were given, besides, design techniques in crucial modules that generated nonlinearity, such as switched-capacitors and bandgap reference, were discussed . This design was fabricated in SMIC 0.18 μm mixedsignal CMOS process and verified. The measured results showed that the chip had a peak SNDR of 89 dB and a 96 dB dynamic range (DR), and consumed a total power of 19.1 mW, and this value droped to 9.1 mW without buffers. Moreover, the prototype yield was 90%, achieving high precision and low power dissipation.



Published: 01 September 2011
CLC:  TN 432  
Cite this article:

HAN Yan, LIAO Lu, HUANG Xiao-wei, ZHANG Hao, WANG Hao. Design of analog circuits in multi-bit quantized audio DAC. J4, 2011, 45(9): 1571-1575.

URL:

https://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2011.09.010     OR     https://www.zjujournals.com/eng/Y2011/V45/I9/1571


多比特量化的音频DAC中模拟电路的设计

设计了一个高精度、低功耗音频ΣΔ数模转换器(DAC)中的模拟部分电路.该DAC采用4 bit量化,不仅增强了调制器的稳定性,减小了功耗和占用面积,而且降低了系统对后端低通滤波器的要求.讨论了电路各模块的实现方法,并详述了开关电容、带隙基准源等产生非线性的关键模块的设计技术.基于SMIC 0.18 μm混合信号CMOS工艺进行了流片验证,测试结果表明:芯片最大信噪失真比达89 dB,动态范围为96 dB,总功耗为19.1 mW,其中不含缓冲器的功耗仅9.1 mW,样片良率为90%,实现了高精度、低功耗的性能.

[1] SCHREIER R, TEMES G. Understanding deltasigma data converters [M]. Piscataway :WileyIEEE Press, 2005: 443-446.
[2] AMEUR N B, SOYAH M, MASMOUDI N, et al. FPGA implementation of polyphase decomposed FIR filters for interpolation used in ΔΣ audio DAC [C]∥ 2009 3rd International Conference on Signals, Circuits and Systems (SCS).Medenine:[s.n.],2009:1-13.
[3] 沈佳铭, 洪亮, 石春琦, 等. 一种用于音频DAC的可重构ΣΔ调制器的设计 [J]. 微电子学, 2007,37(003): 432-435.
SHEN Jiaming, HONG Liang, SHI Chunqi, et al. Design of reconfigurable ΣΔ modulator for audio D/A converter [J]. Microelectronics, 2007, 37(003): 432-435.
[4] 程媛媛, 杨文荣. 音频数模转换器芯片内部低功耗的设计 [J]. 计算机测量与控制, 2007,15(011): 1584-1586.
CHENG Yuanyuan, YANG Wenrong. Low power design of an audio DAC [J]. Computer Measurement & Control, 2007, 15(011): 1584-1586.
[5] RAZAVI B. Design of analog CMOS integrated circuits [M]. New York: McGrawHill Inc, 2000.
[6] EICHENBERGER C, GUGGENBUHL W. Dummy transistor compensation of analog MOS switches [J]. IEEE Journal of SolidState Circuits, 1989,24(4): 1143-1146.
[7] 马绍宇, 韩雁, 黄小伟, 等. 一种高性能, 低功耗音频ΣΔ调制器 [J]. 半导体学报, 2008, 29(010): 2050-2056.
MA Shaoyu, HAN Yan, Huang Xiaowei,et al.A highperformance,lowpower ΣΔ modulator for digital audio applications [J]. Journal of Semiconductors, 2008, 29(010): 2050-2056.
[8] BAIRD R T, FIEZ T S. Improved DeltaSigma DAC linearity using data weighted averaging [C]∥IEEE International Symposium on Circuits and Systems. Seattle,WA:IEEE,1995:13-16.
[9] ANNOVAZZI M, COLONNA V, GANDOLFI G, et al. A lowpower 98dB multibit audio DAC in a standard 33V 035μm CMOS technology [J]. IEEE Journal of SolidState Circuits, 2002,37(7): 825-834.

[1] LEI Jian-ming, HU Bei-wen, GUI Han-shu, ZHANG LeLEI Jian-ming, HU Bei-wen, GUI H. Design of fully differential operational amplifier with low cost common feedback circuit[J]. J4, 2013, 47(10): 1777-1783.
[2] HANG Guo-qiang, LI Jin-xuan, WANG Guo-fei. A novel sample and hold circuit using clocked neuron-MOS scheme[J]. J4, 2012, 46(2): 333-337.
[3] XIAO Lin-rong, CHEN Xie-xiong, YING Shi-yan. QCA circuit design of optimal universal logic gate ULG.2
based on modular methodology
[J]. J4, 2011, 45(6): 1032-1037.
[4] XU Yang, CHEN Ji-Zhong. New method for low power sequential circuit design
based on clock gating
[J]. J4, 2010, 44(9): 1724-1729.
[5] XU Ke-Jun, HU Wen-Yao, CHEN Ji-Zhong, et al. Task scheduling model and algorithm based on dual-Vdd dynamic reconfigurable FPGA[J]. J4, 2010, 44(2): 300-304.
[6] HANG Guo-Jiang, YING Shi-Pan. Novel current-mode CMOS quaternary edge-triggered flip-flops[J]. J4, 2009, 43(11): 1970-1974.
[7] ZHANG Dan-Yan, TUN Xiao-Bei, DIAO Meng-Lian, et al. Integrated circuit design for solar cell maximum power point tracking[J]. J4, 2009, 43(11): 2000-2005.