[1] 姚谏, 夏志斌. 钢结构原理与设计[M]. 北京:中国建筑工业出版社, 2011.
[2] POPOV E P, YANG T S, CHANG S P. Design of steel MRF connections before and after 1994 Northridge earthquake[J]. Engineering Structures, 1998, 20(12):1030-1038.
[3] KISHI N, CHEN W F. Moment-rotation relations of semirigid connections with angles[J]. Journal of Structural Engineering, ASCE, 1991, 117(9):2811-2815.
[4] CHEN W F, KISHI N. Semi rigid steel beam-to-column connections:database and modeling[J]. Journal of Structural Engineering, 1989, 115(1):105-119.
[5] ABDALLA K M, CHEN W F. Expanded database of semi-rigid steel connections[J]. Computers and Structures, 1995, 56(4):553-564.
[6] NETHERCOT D A. Steel beam-to-column connections:a review of test data and its applicability to the evaluation of joint behavior in the performance of steel frames[C]//CIRIA Project Record. London:[s.n.], 1985:338.
[7] NETHERCOT D A. (1985b) Utilization of experimentally obtained connection data in assessing the performance of steel frames, in connection flexibility and steel frames[C]//Proceedings of a Session Sponsored by the Structural Division. Detroit:ASCE, 1985:13-37.
[8] COELHO A, BIJLAARD F, GRESNIGT N, et al. Experimental assessment of the behaviour of bolted T-stub connections made up of welded plates[J]. Journal of Constructional Steel Research, 2004, 60(2):269-311.
[9] PILUSO V, RIZZANO G. Experimental analysis and modelling of bolted T-stubs under cyclic loads[J]. Journal of Constructional Steel Research, 2008, 64(6):655-669.
[10] 舒兴平, 胡习平, 熊曜. 钢框架梁柱T型钢半刚性连接节点的性能研究[J]. 建筑结构, 2006, 36(8):6-9 SHU Xing-ping, HU Xi-ping, XIONG Yao. Research on the behavior of T-stub semi-rigid connections of steel frames[J]. Building Structure, 2006, 36(8):6-9
[11] 舒兴平, 胡习兵. T型钢半刚性连接节点的承载力分析[J]. 钢结构, 2005, 20(81):35-40 SHU Xing-ping, HU Xi-bing. Analysis of the load-bearing capacity of T-stub semi-rigid connections[J]. Steel Construction, 2005, 20(81):35-40
[12] 徐凌, 朱浮声, 李晓龙. 不同节点轻钢框架的受力性能试验研究[J]. 东北大学学报:自然科学版, 2006, 27(10):1165-1168 XU Ling, ZHU Fu-sheng, LI Xiao-long. Experimental study on light-weight steel frames with different semi-rigid joints[J]. Journal of Northeastern University:Natural Science, 2006, 27(10):1165-1168
[13] 王新武, 李捍无, 蒋沧如. 剖分T型钢梁柱连接的滞回性能试验研究[J]. 华中科技大学学报:城市科学版, 2003, 20(2):47-49 WANG Xin-wu, LI Han-wu, JIANG Cang-ru. Experimental research on hysteretic behavior of the slit T steel connections[J]. Journal of Huazhong University of Science and Technology:Urban Science Edition, 2003, 20(2):47-49
[14] 李凤霞, 布欣, 王新武. 剖分T型钢梁柱连接滞回性能研究[J]. 建筑科学, 2010, 26(5):28-32 LI Feng-xia, BU Xin, WANG Xin-wu. Research on hysteretic behavior of the slit T steel beam-column connections[J]. Building Science, 2010, 26(5):28-32
[15] 李泽深, 李秀梅, 郑小伟, 等. T形钢连接梁柱半刚性节点滞回性能试验研究及数值分析[J]. 建筑结构学报, 2014, 35(7):61-68 LI Ze-shen, LI Xiu-mei, ZHENG Xiao-wei, et al. Experimental study and numerical investigation on hysteretic behavior of T-stub semi-rigid beam-to-column connections[J]. Journal of Building Structures, 2014, 35(7):61-68
[16] 李泽深, 覃达威, 张克实, 等. 不同构造T形钢连接节点受力性能分析[J]. 广西大学学报, 2016, 41(1):74-82 LI Ze-shen, QIN Da-wei, ZHANG Ke-shi, et al. Influence of different joints on structural performance of T-stub connections[J]. Journal of Guangxi University, 2016, 41(1):74-82
[17] 舒赣平, 杜二峰, 张欣欣, 等. T型钢连接梁柱节点抗火性能试验研究[J]. 工程力学, 2016, 33(7):136-143 SHU Gan-ping, DU Er-feng, ZHANG Xin-xin, et al. Experimental study on the fire performance of steel beam-column T-stub joints[J]. Engineering Mechanics, 2016, 33(7):136-143
[18] 韩冬, 布欣, 王新武. 空间剖分T型钢梁柱连接角柱节点抗震试验[J]. 浙江大学学报:工学版, 2017, 51(2):287-296 HAN Dong, BU Xin, WANG Xin-wu. Experiment on seismic performance of spatial beam to corner column connection with T-stub[J]. Journal of Zhejiang University:Engineering Science, 2017, 51(2):287-296
[19] BU X, GU Q, WANG X W. Research on seismic performance of spatial beam to column connection with T-stubs[M]//DONG L C, HUANG P H, OZBAKKALOGLU T. AER-Advances in engineering research. Paris:Atlantis Press, 2016:544-549.
[20] 李秀梅, 张克实, 王涛. 梁柱T形钢连接节点力学性能及加强方式研究[J]. 建筑结构, 2015, 45(3):53-58 LI Xiu-mei, ZHANG Ke-shi, WANG Tao. Study on mechanical property and strengthening method of steel beam-to-column T-stub connections[J]. Building Structure, 2015, 45(3):53-58
[21] 王振宇, 张劲帆, 方成. 半刚性节点初始刚度的组件式计算模型[J]. 浙江大学学报:工学版, 2012, 46(11):1995-2006 WANG Zhen-yu, ZHANG Jin-fan, FANG Cheng. Study on the component-based model of semi-rigid beam-to-column joints initial stiffness[J]. Journal of Zhejiang University:Engineering Science, 2012, 46(11):1995-2006
[22] HU J W, LEON R T, PARK T. Mechanical modeling of bolted T-stub connections under cyclic loads Part I:stiffness modeling[J]. Journal of Constructional Steel Research, 2011, 67(11):1710-1718.
[23] GIL B, GONI R. T-stub behaviour under out-of-plane bending. I:experimental research and finite element modeling[J]. Engineering Structures, 2015, 98:230-240.
[24] GIL B, BIJLAARD F, BAYO E. T-stub behavior under out-of-plane bending. Ⅱ:parametric study and analytical characterization[J]. Engineering Structures, 2015, 98:241-250.
[25] YEE Y L, MELCHERS R E. Moment-rotation curves for bolted connections[J]. Journal of Structural Engineering, 1986, 112(3):615-635.
[26] SHERBOURNE A N, BAHAARI M R. Finite element prediction of end plate bolted connection behavior. I:parametric study[J]. Journal of Structural Engineering, 1997, 123(2):157-164.
[27] 丁洁民, 沈祖炎. 节点半刚性对钢框架结构内力和位移的影响[J]. 建筑结构, 1991(6):8-12 DING Jie-min, SHEN Zu-yan. The influence of the semi-rigid connection on the internal force and displacement of the steel frame structure[J]. Building Structure, 1991(6):8-12
[28] 王燕, 李华军, 厉见芬. 半刚性梁柱节点连接的初始刚度和结构内力分析[J]. 工程力学, 2003, 20(6):65-69 WANG Yan, LI Hua-jun, LI Jian-fen. Initial stiffness of semi-rigid beam-to-column connections and tructural internal force analysis[J]. Engineering Mechanics, 2003, 20(6):65-69 |