[1] 韩忠华,宋文萍,乔志德.基于FWH方程的旋翼气动声学计算研究[J].航空学报,2003, 24(5): 400-404.
HAN Zhong-hua, SONG Wen-pin, QIAO Zhi-de. Aeroacoustic calculation for helicopter rotor in hover and in forward flight based on FWH equation [J]. Acta Aeronautica et Astronautica Sinica, 2003, 24(5):400-404.
[2] 李晓东,段传波,于潮.三维FW-H方程与CAA数值模拟匹配技术研究[J].工程热物理学报,2005,26(1):51-54.
LI Xiao-dong, DUAN Chuan-bo, YU Chao. On the matching technology between the 3-D FW-H equation and CAA numerical simulations [J]. Journal of Engineering Thermophysics, 2005, 26(1): 51-54.
[3] 王泽晖,罗柏华,刘宇陆.关于气动声学数值计算的方法与进展[J].力学季刊,2003,24(2): 219-226.
WANG Ze-hui, LUO Bai-hua, LIU Yu-lu. Numerical methods and advances for aeroacoustics [J]. Chinese Quarterly of Mechanics. 2003, 24(2): 219-226.
[4] FARASSAT F. Acoustic radiation from rotating blades—the Kirchhoff method in aeroacoustics [J]. Journal of Sound and Vibration, 2001, 239(4):785-800.
[5] MAALOUM A, KOUIDRI S, REY R. Aeroacoustic performance evaluation of axial flow fans based on the unsteady pressure field on the blade surface [J]. Applied Acoustics, 2004, 65(4): 367-384.
[6] CASPER J, FARASSAT F. Broadband trailing edge noise predictions in the time domain [J]. Journal of Sound and Vibration, 2004, 271(1): 159-176.
[7] KIM H J, LEE S, FUJISAWA N. Computation of unsteady flow and aerodynamic noise of NACA0018 airfoil using largeeddy simulation [J]. International Journal of Heat and Fluid Flow, 2006, 27(2): 229-242.
[8] BAILLY C, BOGEY C, GLOERFELT X. Some useful hybrid approaches for predicting aerodynamic noise [J]. Comptes Rendus Mécanique, 2005, 333(9): 666-675.
[9] 徐世荣.降低电机通风噪声的试验研究[J].东方电气评论,1992,6(1): 34-40.
XU Shi-rong. Experimental study on reducing noise of motor ventilation [J]. Dongfang Electric Review, 1992, 6(1): 34-40.
[10] 徐红梅,郝志勇,郭磊.阶次分析在发动机进气噪声研究中的应用[J].小型内燃机与摩托车,2008, 37(1): 83-86.
XU Hong-mei, HAO Zhi-yong, GUO Lei. Application of order analysis in intake noise research of engine [J]. Small Internal Combustion Engine and Motorcycle, 2008, 37(1): 83-86.
[11] KIM W, JEON W H, HUR N, et al. Development of a low-noise cooling fan for an alternator using numerical and doe methods [J]. International Journal of Automotive Technology, 2011, 12(2): 307-314.
[12] 张亚东,董大伟,闫兵,等.车用交流发电机气动噪声试验研究[J].噪声与振动控制,2014, 34(3): 107-110.
ZHANG Ya-dong, DONG Da-wei, YAN Bin, et al. Experiment study on aerodynamic noise of an automotive alternator [J]. Noise and Vibration Contral. 2014, 34(3): 107-110.
[13] 张亚东,董大伟,闫兵,等.车用交流发电机气动噪声数值分析[J].振动与冲击,2015,35(1): 174182.
ZHANG Ya-dong, DONG Da-wei, YAN Bin, et al. Numerical simulation analysis for aerodynamic noise of a vehicle alternator [J]. Journal of Vibration and Shock, 2015, 35(1): 174-182.
[14] 王媛文,董大伟,闫兵.汽车发电机冷却风扇旋转噪声预测方法[J].航空动力学报,2015, 30(7): 1711-1720.
WANG Yuan-wen, DONG Da-wei, YAN Bin. Prediction method of vehicle alternator cooling fan rotation noise [J]. Journal of Aerospace Power, 2015, 30(7): 1711-1720.
[15] LEE K Y, CHOI Y S, KIM Y L, et al. Design of axial fan using inverse design method [J]. Journal of Mechanical Science and Technology, 2008, 22(10):1883-1888.
[16] 王惠茹,吕国坤,郑泉.基于Fluent与Virtual Lab 发动机风扇气动噪声的联合仿真[J]. 湖北汽车工业学院学报, 2014, 28(1): 30-33.
WANG Hui-ru, LV Guo-kun, ZHENG Quan. Co-simulation of aerodynamic noise for engine fan based on fluent and virtual lab [J]. Journal of Hubei University of Automotive Technology, 2014, 28(1): 30-33.
[17] 夏恒,宫镇.用边界元法计算高速车辆内部气流噪声[J].江苏大学学报:自然科学版, 2003, 24(1): 47-50.
XIA Heng, GONG Zhen. Calculation of the internal airflow noise of high speed vehicle based on boundary element method [J]. Journal of Jiangsu University: Natural Science Edition, 2003, 24(1): 47-50.
[18] BOLTEZAR M, MESARIC M, KUHELJ A. The influence of uneven blade spacing on the SPL and noise spectra radiated from radial fans [J]. Journal of Sound and Vibration, 1998, 216(4): 697-711.
[19] 全国声学标准化技术委员会.声学声压法测定噪块源声功率级消声室和半消声室精密法(非书资料):GB 6882—2016\[S\].北京:中国标准出版社,2016: 9.
[20] 徐俊伟,吴亚锋,陈耿.气动噪声数值计算方法的比较与应用[J].噪声与振动控制,2012, 32(4): 6-10.
XU Jun-wei, WU Ya-feng, CHEN Geng. Comparison and application on the aero-acoustics numerical computing methods [J]. Noise and Vibration Control, 2012, 32(4): 6-10. |