Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
机械与能源工程     
预连接工艺对壁板动态特性的影响分析
曲巍崴, 卢贤刚, 杨迪
浙江大学 机械工程学院 浙江省先进制造技术重点研究实验室,浙江 杭州,310027
Influence of pre-joining scheme on panel dynamic characteristic
QU Wei wei, LU Xian gang, YANG Di
Key Laboratory of Advanced Manufacturing Technology of Zhejiang Province, College of Mechanical Engineering, Zhejiang University, Hangzhou,310027, China
 全文: PDF(3881 KB)   HTML
摘要：

针对预连接对壁板动态性能影响的问题,提出描述壁板预装配后动态性能的刚度评价指标.为了确定预连接分布，将预连接结构等效为多自由度的弹簧质量系统,建立壁板预连接分布优化模型并提取相应刚度信息,以刚度指标最大为优化目标,应用遗传算法进行求解计算.构建蒙皮长桁的壁板仿真模型,将不同预连接分布映射至壁板仿真模型上,利用低阶固有频率的变化验证以刚度为指标的优化方法的正确性.设计壁板动态特性测试实验,与不同预连接分布下提取的仿真频率进行比较,证明了壁板仿真模型的有效性.通过仿真与实验,表明刚度指标的有效性,为进一步研究预连接分布对壁板加工性能影响研究奠定基础.
Abstract:

The stiffness evaluation index for the dynamic performance of the pre-assembled panel was proposed aiming at the influence of the pre-joining on panel dynamic characteristic. The pre-joined structure was equivalent to a multiple degrees of freedom spring-mass system. In order to determine the pre-joining schemes, taking the maximum stiffness index as the optimization goal, a pre-joining scheme optimization model was presented and solved by the genetic algorithm. Subsequently, a simulation model of a skin-stringer panel with different pre-joining schemes and their corresponding stiffness information were constructed|the low natural frequencies were analyzed to verify the rationality of the proposed index. An experiment of panel dynamic characteristic was designedto compare the simulation frequencies obtained from different pre-joining schemes,which indicated the effectiveness of the simulation model of panel. The simulation and experiment prove the validity of the stiffness index, which lay a foundation for further study on the effect of pre-joining schemes on panel machining properties.
出版日期: 2017-03-06
CLC:  TH 16  
基金资助:

国家自然科学基金资助项目（51305395）
作者简介: 曲巍崴(1981—)，女，副研究员，从事壁板装配变形、机器人加工、离线编程及仿真系统开发等研究.ORCID： 0000-0002-5345-6891. E-mail：qwwwwl@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

曲巍崴, 卢贤刚, 杨迪. 预连接工艺对壁板动态特性的影响分析[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2017.02.015.

QU Wei wei, LU Xian gang, YANG Di. Influence of pre-joining scheme on panel dynamic characteristic. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2017.02.015.

［1］ CHENG H, WANG R X, LI Y, et al. Modeling and analyzing of variation propagation in aeronautical thinwalled structures automated riveting ［J］. Assembly Automation, 2012, 32(1): 25-37.
［2］ CHENG H, LI Y, ZHANG K, et al. Variation modeling of aeronautical thinwalled structures with multistate riveting ［J］. Journal of Manufacturing Systems, 2011, 30(2): 101-115.
［3］ LIU G, TANG W, KE Y L, et al. Modeling of fast prejoining processes optimization for skinstringer panels ［J］. Assembly Automation, 2014, 34(4): 323-332.
［4］ LIU G, TANG W, KE Y L, et al. Prejoining process planning model for a batch of skinstringer panels based on statistical clearances ［J］. The International Journal of Advanced Manufacturing Technology, 2015, 78(1/4): 41-51.
［5］ 孙鑫.航空材料自动化精密制孔工艺研究［D］.南京：南京航空航天大学,2014.
SUN Xin. Research on automatic precision drilling process of aeronautic material ［D］. Nanjing ：Nanjing University of Aeronautics and Astronautics, 2014.
［6］ 秦国华,吴竹溪,张卫红.薄壁件的装夹变形机理分析与控制技术［J］.机械工程学报,2007,43（4）: 211-216.
QIN Guo hua, WU Zhu xi, ZHANG Wei hong. Analysis and control technique of fixturing deformation mechanism of thinwalled workpiece ［J］. Chinese Journal of Mechanical Engineering,2007,43（4）: 211-216.
［7］ 王军,耿世民,张辽远,等.薄壁壳体件装夹变形机理有限元分析与控制［J］.兵工学报,2011,32（8）: 1008-1015.
WANG Jun, GENG Shi min,ZHANG Liao yuan, et al. Finite element analysis and control of clamping deformation mechanism of thinwall shell workpiece［J］. Acta Armamentarii,2011,32（8）: 1008-1015.
［8］ KAYA N. Machining fixture locating and clamping position optimization using genetic algorithms ［J］. Computers in Industry, 2006, 57(2): 112-120.
［9］ LIU S C, HU S J. Variation simulation for deformable sheet metal assemblies using finite element methods ［J］. Journal Of Manufacturing Science And Engineering, 1997, 119(3): 368-374.
[1] 程训,余建波. 基于机器视觉的加工刀具磨损监测方法[J]. 浙江大学学报(工学版), 2021, 55(5): 896-904.
[2] 周爱民,刘宏斌,张书涛,欧阳晋焱. 面向汽车主客观审美评价的不确定性推理模型[J]. 浙江大学学报(工学版), 2021, 55(3): 419-429.
[3] 李斌,傅建中. 基于三维T样条的异质材料实体建模与切片[J]. 浙江大学学报(工学版), 2021, 55(1): 135-144.
[4] 周爱民,周彩霞,欧阳晋焱,张书涛. 基于指标适度标准化的界面风格美综合评价模型[J]. 浙江大学学报(工学版), 2020, 54(12): 2273-2285.
[5] 杜军,马琛,魏正英. 基于视觉传感的铝合金电弧增材沉积层形貌动态响应[J]. 浙江大学学报(工学版), 2020, 54(8): 1481-1489.
[6] 金列俊,詹建明,陈俊华,王涛. 基于一维卷积神经网络的钻杆故障诊断[J]. 浙江大学学报(工学版), 2020, 54(3): 467-474.
[7] 邓小雷,盛泽枫,张江林,吕笑文,贺忠,王建臣,傅建中. 基于不规则元胞的主轴温度－结构场耦合热拓扑优化设计方法[J]. 浙江大学学报(工学版), 2020, 54(1): 23-32.
[8] 胡天中,余建波. 基于多尺度分解和深度学习的锂电池寿命预测[J]. 浙江大学学报(工学版), 2019, 53(10): 1852-1864.
[9] 欧阳永强,张新艳. 考虑堆垛机加减速的节能自动立库设计[J]. 浙江大学学报(工学版), 2019, 53(9): 1681-1688.
[10] 祝鹏,余建波,郑小云,王永松,孙习武. 机械装配过程的偏差传递网络建模与误差溯源[J]. 浙江大学学报(工学版), 2019, 53(8): 1582-1593.
[11] 何雪军, 王进, 陆国栋, 刘振宇, 陈立, 金晶. 基于三角网切片及碰撞检测的工业机器人三维头像雕刻[J]. 浙江大学学报(工学版), 2017, 51(6): 1104-1110.
[12] 王自立, 张树有, 裘乐淼. 基于可信度区间的注塑装备设计塑化能耗分析[J]. 浙江大学学报(工学版), 2017, 51(2): 328-335.
[13] 王越, 苏宏业, 邵寒山, 卢山,谢磊. 需求与公用工程不确定的生产计划与调度集成[J]. 浙江大学学报(工学版), 2017, 51(1): 57-67.
[14] 罗仕鉴, 董烨楠. 面向创意设计的器物知识分类研究[J]. 浙江大学学报(工学版), 2017, 51(1): 113-123.
[15] 文贤鹤, 周晓军, 杨辰龙. 云制造模式车辆试验服务平台构建方法[J]. 浙江大学学报(工学版), 2016, 50(12): 2254-2261.