[1] MENG K, ZHANG W, CHEN W, et al. The design and micromachining of an electromagnetic MEMS flappingwing micro air vehicle [J]. Microsystem Technologies, 2012, 18(1): 127-136.
[2] 唐刚志, 张力, 尚会超, 等. 缸径和压缩比对微型内燃机微燃烧性能的影响[J]. 华中科技大学学报:自然科学版, 2014, 42(9): 112-117.
TANG Gangzhi, ZHANG Li, SHANG Huichao, et al. Influence analysis of cylinder bore and compression ratio on micro combustion characteristics in micro ICE [J]. Journal of Huazhong University of Science and Technology: Natural Science Edition, 2014, 42(9): 112-117.
[3] 甘云华, 罗燕来, 田中华. 燃料流量与管径对受限空间下微小火焰的影响分析[J]. 农业机械学报, 2015, 46(1): 323-328.
GAN Yunhua, LUO Yanlai, TIAN Zhonghua. Effects of fuel flow rate and burner nozzle diameter on small flame characteristics in confined space [J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(1): 323-328.
[4] 周俊虎, 汪洋, 杨卫娟, 等. 不同外部风温对微尺度火焰的影响[J]. 浙江大学学报: 工学版, 2011, 45(1): 146-150.
ZHOU Junhu, WANG Yang, YANG Weijuan, et al. Effect of external wind temperature to microscale flame [J]. Journal of Zhejiang University: Engineering Science, 2011, 45(1): 146-150.
[5] 吴凯, 王谦, 柏金, 等. 微型动力装置燃烧过程及做功能力评价[J]. 内燃机学报, 2015, 33(1): 58-62.
WU Kai, WANG Qian, BAI Jin, et al. Evaluation on combustion process and work capacity of a micropower device [J]. Transactions of Chinese Society for Internal Combustion Engines, 2015, 33(1): 58-62.
[6] 周明月, 杨卫娟, 邓尘, 等. 微型圆管内氢气/甲烷/空气催化燃烧实验[J]. 浙江大学学报: 工学版, 2015, 49(12): 2276-2281.
ZHOU Mingyue, YANG Weijuan, DENG Chen, Experiments on hydrogen /methane/air catalytic combustion in micro tube [J]. Journal of Zhejiang University: Engineering Science, 2015, 49(12): 2276-2281.
[7] WANG Y, ZHOU Z, ZHOU J, et al. Performance of a micro engine with heptane as working fluid [J]. Applied Energy, 2011, 88(1): 150-155.
[8] MENON S, CADOU C P. Scaling of miniature pistonengine performance, part 1: overall engine performance [J]. Journal of Propulsion and Power, 2013, 29(4): 774-787.
[9] MENON S, MOULTON N, CADOU C. Development of a dynamometer for measuring small internalcombustion engine performance [J]. Journal of Propulsion and Power, 2007, 23(1): 194-202.
[10] KITTELSON D B, AMBS J L, HADJKACEM H. Particulate emissions from diesel engines: influence of incylinder surface \[C\]∥SAE Technical Paper.Detroit, Michigan, USA:\[s. n.\], 1990:900645
[11] AICHANDAR S, TAMILPORAI P. Low heat rejection enginesan overview \[C\]∥SAE Technical Paper.Detroit, Michigan, USA:\[s. n.\], 2003:010403.
[12] MONTANARO A, COSTA M, SORGE U, et al. GDI spraywall interaction with numerical characterization: wall temperature influence \[C\]∥SAE Technical Paper.Detroit, Michigan, USA:[s. n.\], 2015:010917.
[13] LUO X, YU X, ZHA K, et al. Incylinder wall temperature influence on unburned hydrocarbon emissions during transitional period in an optical engine using a laserinduced phosphorescence technique [J]. SAE International Journal of Engines, 2014, 7(2): 995-1002.
[14] 李韬, 邓康耀, 程用胜. 壁面温度对喷射油膜附壁厚度的影响[J]. 内燃机工程, 2010, 31(3): 67-70.
LI Tao, DENG Kangyao, CHENG Yongsheng. Quantitative measurement of the influence of temperature of surface on spray film thickness with laser induced fluorescence technique [J]. Chinese Internal Combustion Engine Engineering, 2010, 31(3): 6770.
[15] 沈胜强, 张洁珊, 梁刚涛. 液滴撞击加热壁面传热实验研究[J]. 物理学报, 2015, 64(13): 13470411347047.
SHEN Shengqiang, ZHANG Jieshan, LIANG Gangtao. Experimental study of heat transfer from droplet impact on a heated surface [J]. Acta Physica Sicica, 2015, 64(13): 13470411347047.
[16] 战栋栋, 钱吉裕. 热管导热板当量导热系数研究[J]. 电子机械工程, 2012, 28(4): 1214.
ZHAN Dongdong, QIAN Jiyu. Study on effective conductivity of heat pipe embedded Al plates [J]. ElectroMechanical Engineering, 2012, 28(4): 1214. |