Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
机械工程     
微凸体切向滑移特性
刘会静1, 洪军1, 杨国庆1,2, 朱林波1
1.西安交通大学 机械制造系统工程国家重点实验室,陕西 西安 710049；2.湖南科技大学 机械工程学院,湖南 湘潭 411201
Tangential sliding characteristics of asperities
LIU Hui-jing1, HONG Jun1, YANG Guo-qing1,2, ZHU Lin-bo1
1. State Key Laboratory for Manufacturing System Engineering, Xi’an Jiaotong University, Xi’an 710049, China; 2. College of Electromechanical Engineering, Hunan University of Science and Technology,
Xiangtan 411201, China
 全文: PDF(945 KB)   HTML
摘要：

为了从微观角度探究粗糙表面的切向滑移特性,构建一种具有回转抛物体形状的微凸体切向滑移有限元模型.该模型综合考虑了材料的弹性、弹塑性变形和塑性变形特征,分析整个切向滑移过程中切向、法向合力分别随切向、法向位移等参数的变化规律,并给出接触载荷的无量纲化拟合公式；推导了基于Kogut弹塑性(KE)模型的侧接触力学模型,并用该理论解释切向滑移特性.分析表明：KE模型侧接触模型仅仅适用于小变形范围；切向滑移位移越大,切向的塑性流动越大,KE模型侧接触模型与仿真模型的误差也越大；另外,载荷的最大值、最小值和均值都表现出了明显的变化规律.微凸体切向滑移特性的仿真分析以及侧接触理论研究为粗糙表面接触特性的研究奠定了基础.
Abstract:

In order to investigate the micro tangential sliding characteristics of rough surfaces, a nite element analysis (FEA) model with the shape of the rotary parabola was proposed to simulate tangential sliding of asperities. The model can deal with the deformation mechanism of elastic, elastic-plastic and plastic. The effects of the tangential and normal distance on the tangential and normal force were discussed in the whole tangential sliding process. Based on the results, the fitting formula of the dimensionless variation of the load was presented. Using the Kogut’s elastic-plastic model named KE model, the shoulder to shoulder contact model was deduced to explain the sliding characteristics. It is shown that the KE shoulder to shoulder contact model is valid for the case of small deformations. However, for the large sliding distance, the plastic flow along the slip direction increases with the increasing sliding distance, and the errors between KE model and the FEA model become larger. In addition, the maximum, the minimum and the mean value of the loads have obvious change trends. The simulating and theoretical research of the sliding characteristics between asperities provides a foundation for the study of the sliding characteristics between rough surfaces.
出版日期: 2015-04-01
:  TH 123  
基金资助:

国家“973”重点基础研究发展规划资助项目（2011CB706606）；国家科技重大专项资助项目（2012ZX04012-031）.
通讯作者: 洪军，男，教授，博导.     E-mail: jhong@mail.xjtu.edu.cn
作者简介: 刘会静（1985—），女，硕士生,从事结合面接触特性研究.E-mail：liu_xian0123@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

刘会静, 洪军, 杨国庆, 朱林波. 微凸体切向滑移特性[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2014.06.021.

LIU Hui-jing, HONG Jun, YANG Guo-qing, ZHU Lin-bo. Tangential sliding characteristics of asperities. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2014.06.021.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2014.06.021    或    http://www.zjujournals.com/eng/CN/Y2014/V48/I6/1114

［1］ GREENWOOD J A, WILLIAMSON J. Contact of nominally flat surfaces［J］. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 1966, 295(1442): 300-319.
［2］ LIN L P, LIN J F. An elastoplastic microasperity contact model for metallic materials［J］. Journal of Tribology, 2005, 127(3): 666-672.
［3］ KOGUT L, ETSION I. Elastic-plastic contact analysis of a sphere and a rigid flat［J］. Journal of Applied Mechanics, 2002, 69(5)： 657-662.
［4］ JACKSON R L, GREEN I. A finite element study of elasto-plastic hemispherical contact against a rigid flat［J］. Journal of Tribology, 2005, 127(2): 343-354.
［5］ 赵永武,吕彦明,蒋建忠.新的粗糙表面弹塑性接触模型［J］.机械工程学报,2007, 43 (3): 95-101.
ZHAO Yong-wu, LU Yan-ming, JIANG Jian-zhong. A new elastic-plastic contact model between rough surfaces［J］. Chinese Journal of Mechanical Engineering, 2007, 43 (3)： 95-101.
［6］ SEPEHRI A, FARHANG K. On elastic interaction of nominally flat rough surfaces［J］. Journal of Tribology, 2008, 130(1): 1101401-110140105.
［7］ KOGUT L, ETSION I. A finite element-based elastic-plastic model for the contact of rough surfaces［J］. Tribology Transactions, 2003, 46(3): 383-390.
［8］ FAULKNER A, ARNELL R D. The development of a nite element model to simulate the sliding interaction between two, three-dimensional, elasto-plastic, hemispherical asperities［J］. Wear, 2000, 242(1): 114-122.
［9］ JACKSON R L, DUVVURU R S, MEGHANI H, et al. An analysis of elasto-plastic sliding spherical asperity interaction［J］. Wear, 2007, 262(1): 210-219.
［10］ BRIZMER V, KLIGERMAN Y, ETSION I. A model for junction growth of a spherical contact under full stick condition［J］. Journal of Tribology, 2007, 129(4): 783-790.
［11］ BRIZMER V, KLIGERMAN Y, ETSION I. Elastic-plastic spherical contact under combined normal and tangential loading in full stick［J］. Tribology Letters, 2007, 25(1): 61-70.
［12］ ZOLOTAREVSKIY V, KLIGERMAN Y, ETSION I. The Evolution of Static Friction for Elastic-Plastic Spherical Contact in Pre-sliding［J］, Journal of Tribology, 2011, 133(3)：3450201-3450203.
［13］ OVCHARENKO A, HALPERIN G, ETSION I. Experimental study of adhesive static friction in a spherical elastic-plastic contact［J］. Journal of Tribology, 2008, 130(2): 2140101-2140106.
［14］ OVCHARENKO A, HALPERIN G, ETSION I,et al. A novel test rig for in situ and real time optical measurement of the contact area evolution during pre-sliding of a spherical contact［J］. Tribology Letters, 2006, 23(1): 55-63.
［15］ WU Ai-zhong, SHI Xi. An elastic-plastic spherical contact model under combined normal and tangential loading［J］. Journal of Applied Mechanics, 2012, 79(5): 5100101-5100109.
[1] 冯燕, 俞小莉, 刘震涛. 基于热弹塑性理论的法向接触刚度分形模型[J]. 浙江大学学报(工学版), 2015, 49(8): 1553-1558.
[2] 艾青林, 祖顺江, 胥芳. 并联机构运动学与奇异性研究进展[J]. J4, 2012, 46(8): 1345-1359.
[3] 陈晓平俞小莉,胡如夫,李建锋. 采用缺口件等效与渐进插值法预测构件疲劳极限[J]. J4, 2012, 46(3): 542-548.
[4] 艾青林,黄伟锋,祖顺江. 基于螺旋理论的钢带并联机器人力学特性数值分析[J]. J4, 2011, 45(9): 1650-1656.
[5] 周磊, 余忠华. 基于弹塑性理论的T型导轨校直模型研究[J]. J4, 2010, 44(2): 368-372.