能源工程 |
|
|
|
|
基于热弹塑性理论的法向接触刚度分形模型 |
冯燕1,2, 俞小莉1, 刘震涛1 |
1. 浙江大学 动力机械及车辆工程研究所,浙江 杭州 310027; 2. 浙江同济科技职业学院 机电系,浙江 杭州 311231 |
|
Fractal model of normal contact stiffness based on thermal elasto-plastic theory |
FENG Yan1,2, YU Xiao-li1, LIU Zhen-tao1 |
1. Power Machinery & Vehicular Engineering Institute, Zhejiang University, Hangzhou 310027, China; 2. Department of Mechanical and Electrical Engineering, Zhejiang Tongji Vocational College of Science and Technology, Hangzhou 311231, China |
[1] MAJUMDAR A, BHUSHAN B. Role of fractal geometry in roughness characterization and contact mechanics of surfaces [J]. ASME J Tribology, 1990, 112: 205-216.
[2] MAJUMDAR A, BHUSHAN B. Fractal model of elastic-plastic contact between rough surfaces [J]. ASME J Tribology, 1991, 113: 1-11.
[3] PAVELESCU D, TUDOR A. On the roughness fractal character, the tribological parameters and the error factors [J]. Proceedings of the Romanian Academy, Series A, 2004(5): 1-6.
[4] CIAVARELLA M, DELFINE V, DEMELIO G. A “re-vitalized” Greenwood and Williamson model of elastic contact between fractal surfaces [J]. Journal of the mechanics and physics of solids, 2006, 54(2006): 2569-2591.
[5] SAHOO P, GHOSH N. Finite element contact analysis of fractal surfaces [J]. Journal of Physics D: Applied Physics, 2007,40(14): 4245-4252.
[6] GOERKE D, WILLNER K. Normal contact of fractal surfaces [J]. Wear, 2008, 264(7): 589-598.
[7] 温淑花,张学良,武美先,等.结合面法向接触刚度分形模型建立与仿真[J].农业机械学报,2009,40(11): 197-202.
WEN Shu-hua, ZHANG Xue-liang, WU Mei-xian, et al. Fractal model and simulation of normal contact stiffness [J]. Transactions of the Chinese Society for Agricultural Machinery, 2009,40(11): 197-202.
[8] JIANG Shuyun, ZHENG Yunjian, ZHU Hua. A contact stiffness model of machined plane joint based on fractal theory [J]. Journal of Tribology, 2010, 132: 0114-0117.
[9] 兰国生,张学良,丁红钦,等.基于分形理论的结合面改进接触模型[J].农业机械学报,2011,42(10): 217-223.
LAN Guo-sheng, ZHANG Xue-liang, DING Hong-qin, et al. Modified contact model of joint interfaces based on fractal theory [J]. Transactions of the Chinese Society for Agricultural Machinery, 2011,42(10): 217-223.
[10] 杨红平,傅卫平,王雯,等.基于分形几何与接触力学理论的结合面法向接触刚度计算模型[J].机械工程学报,2013,49(1): 102-107.
YANG Hong-ping, FU Wei-ping, WANG Wen, et al. Calculation model of the normal contact stiffness of joints based on the fractal geometry and contact theory [J]. Chinese Journal of Mechanical Engineering,2013,49(1): 102-107.
[11] 田红亮,钟先友,秦红玲,等.依据各向异性分形几何理论的固定结合部法向接触力学模型[J].机械工程学报,2013,49(21): 108-122.
TIAN Hong-liang, ZHONG Xian-you, QIN Hong-ling, et al. Normal contact mechanics model of fixed joint interface adopting anisotropic fractal geometrical theory [J]. Chinese Journal of Mechanical Engineering, 2013,49(21): 108-122.
[12] KOGUT L, KOMVOPOULOS K. Electrical contact resistance theory for conductive rough surfaces [J]. Journal of Applied Physics, 2003, 94(5): 3153-3162.
[13] 姬翠翠,朱华.粗糙表面分形接触模型的研究进展[J].润滑与密封,2011,36(9): 114-119.
JI Cui-cui, ZHU Hua. Research progress on m-b fractal contact model [J]. Lubrication Engineering, 2011, 36(9): 114-119.
[14] 平修二.热应力与热疲劳:基础理论与设计应用[M].北京:国防工业出版社,1984: 24. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|