Please wait a minute...
浙江大学学报(工学版)
J4  2009, Vol. 43 Issue (8): 1497-1450    DOI: 10.3785/j.issn.1008-973X.2009.
机械工程     
存在点缺陷的深沟球轴承的动力学响应
张根源1,周泓2,常宗瑜3
(1.浙江传媒学院 电子信息学院，浙江 杭州 310018； 2.浙江大学 仪器科学与工程学系，浙江 杭州 310027；3.中国海洋大学 工程学院，山东 青岛 266100)
Dynamic response of deep groove ball bearing with point defects
 ZHANG Gen-Yuan1, ZHOU Hong2, CHANG Zong-Yu3
1. School of Electronics and Information, Zhejiang University of Media and Communications, Hangzhou 310018, China;
2. Department of Instrument Science and Technology, Zhejiang University, Hangzhou 310027, China;
3. Engineering College, Ocean University of China, Qingdao 266100, China
 全文: PDF(1200 KB)   HTML
摘要：

点缺陷对滚动轴承的使用寿命和整机性能有着显著的影响.基于单边接触模型和弹流润滑理论,分析了存在点缺陷的滚动轴承的响应特征.采用多体动力学方法建立了考虑点缺陷的滚动轴承动力学模型,对外圈存在点缺陷的滚动轴承的内圈、外圈和保持架等的动力学响应进行了模拟.分析了在滚动体通过缺陷的动力学过程中滚动体和外圈产生的冲击现象,发现频率响应中的峰值频率与外圈的特征频率相关,这与滚动轴承故障诊断结论相吻合.提出的滚动轴承动力学模型可以用于点缺陷故障特征的提取和滚动轴承的故障诊断.
Abstract:

Point defects have significant effects on the life of rolling element bearings and the dynamic properties of whole machines. In order to analyze the response of rolling element bearings considering point defects, unilateral contact model, elastohydrodynamic lubrication theory and multibody method were applied to develop a dynamic model of deep groove ball bearing. The dynamic responses of inner race, outrace and cage were simulated. The impact phenomena between race and rolling elements were analyzed in the process of balls passing through the point defect. The results show that the peak frequencies in frequency domain are relevant to the characteristic frequency, which agrees with the rules of fault diagnosis for rolling element bearing.This rolling element bearing model can be applied to fault feature extraction and fault diagnosis.
出版日期: 2009-09-28
:  TU 411  
基金资助:

浙江省自然科学基金资助项目（Y1080379）.
作者简介: 张根源（1963－），男，浙江临安人，副教授，从事检测技术研究.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

张根源, 周泓, 常宗瑜. 存在点缺陷的深沟球轴承的动力学响应[J]. J4, 2009, 43(8): 1497-1450.

ZHANG Gen-Yuan, ZHOU Hong, CHANG Zong-Yu. Dynamic response of deep groove ball bearing with point defects. J4, 2009, 43(8): 1497-1450.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2009.    或    http://www.zjujournals.com/eng/CN/Y2009/V43/I8/1497

[1] GUPTA P K. Dynamics of rolling element bearings [J]. Journal of Lubrication Technology, 1979, 101: 298-326.
[2] HARRIS T A. Rolling bearing analysis [M]. New York: John Wiley & Sons, 1991.
[3] 邓四二,郝建军,滕弘飞,等. 角接触球轴承保持架动力学分析[J]. 轴承, 2007(10): 1-5.
DENG Si-er, HAO Jian-jun, TENG Hong-fei, et al. Dynamic analysis on cage of angular contact ball bearings [J]. Bearings, 2007(10): 1-5.
[4] 姚廷强,迟毅林,黄亚宇. 角接触球轴承的3D接触动态特性分析[J]. 机械设计与制造, 2007(10): 1-3.
YAO Ting-qiang, CHI Yi-lin, HUANG Ya-yu. Dynamic contact analysis of ball bearing [J]. Machinery Design and Manufacture, 2007(10): 1-3.
[5] 陈於学,王冠兵,杨曙年. 圆柱滚子轴承的动态刚度分析[J]. 轴承, 2007(4): 1-5.
CHEN Yu-xue, WANG Guan-bing, YANG Shu-nian. Analysis of dynamic stiffness of cylindrical roller bearings [J]. Bearings, 2007(4): 1-5.
[6] SAKAGUCHI T, HARADA K. Dynamic analysis of cage behavior in a tapered roller bearing [J]. Journal of Tribology, 2006, 128(3): 604-611.
[7] CAO M, XIAO J A. A comprehensive dynamic model of double-row spherical roller bearing-model development and case studies on surface defects, preloads, and radial clearance [J]. Mechanical Systems and Signal Processing, 2008, 22(9): 467-489.
[8] RAFSNJANIA A, ABBASIONA S, FARSHIDIANFAR A, et al. Nonlinear dynamic modeling of surface defects in rolling element bearing systems [J]. Journal of Sound and Vibration, 2009, 319(3-5): 1150-1174.
[9] SOPANEN J, MIKKOLA A. Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 1: Theory [J]. Journal of Multi-body Dynamics, 2003, 217(3): 213-223.
[10] PFEIFFER F. Unilateral problems of dynamics [J]. Archive of Applied Mechanics, 1999, 69(8): 503-527.
[11] BOTTASSO C L, TRAINELLI L. Implementation of effective procedures for unilateral contact modeling in multibody dynamics [J]. Mechanics Research Communications, 2001, 28(3): 233-246.
[12] 冈本纯三. 球轴承动力学[M]. 黄志强,译. 北京:机械工业出版社, 2003: 2326.
[13] 陈长征,胡立新,周勃. 设备振动分析与故障诊断技术[M]. 北京:科学出版社, 2007.
[1] 刘长殿, 孙红月, 康剑伟, 杜丽丽. 土体的充气阻渗试验[J]. J4, 2014, 48(2): 236-241.
[2] 柯瀚,王文芳,魏长春,陈云敏,詹良通. 填埋体饱和渗透系数影响因素室内研究[J]. J4, 2013, 47(7): 1164-1170.
[3] 余钊圣, 王宇, 邵雪明, 吴腾虎. 中性悬浮大颗粒对湍槽流影响的数值研究[J]. J4, 2013, 47(1): 109-115.
[4] 王林涛,龚国芳,施虎,刘怀印. 基于盾构密封舱压力直接反馈地表变形控制[J]. J4, 2012, 46(7): 1182-1188.
[5] 刘永莉,孙红月,于洋,詹伟,尚岳全. 基于BOTDR监测技术抗滑桩上滑坡推力确定[J]. J4, 2012, 46(5): 798-803.
[6] 林巍, 楼文娟, 申屠团兵, 黄铭枫. 高层建筑脉动风压的非高斯峰值因子方法[J]. J4, 2012, 46(4): 691-697.
[7] 刘永莉, 孙红月, 于洋, 詹伟， 尚岳全. 抗滑桩内力的BOTDR监测分析[J]. J4, 2012, 46(2): 243-249.
[8] 徐日庆,张俊,朱剑锋, 王兴陈. 考虑扰动影响的修正Duncan-Chang模型[J]. J4, 2012, 46(1): 1-7.
[9] 周建, 郑鸿镔, 温晓贵, 管林波, 邓以亮. 考虑中主应力系数影响的主应力轴旋转下
原状软黏土变形研究[J]. J4, 2011, 45(12): 2134-2141.
[10] 薛文, 金伟良, 横田弘. 养护条件与暴露环境对氯离子传输的耦合作用[J]. J4, 2011, 45(8): 1416-1422.
[11] 陈贵锋,马晓薇,吴建海,马巧云,薛晶晶,郝秋艳. 快速热处理对高能粒子辐照硅中氧沉淀的影响[J]. J4, 2011, 45(5): 928-933.
[12] 陈国红, 谢康和, 程永峰, 徐妍. 考虑涂抹区渗透系数变化的砂井地基固结解[J]. J4, 2011, 45(4): 665-670.
[13] 王艳, 李海峰, 徐熙平. 双灯投影机方棒照明系统的设计[J]. J4, 2011, 45(2): 382-386.
[14] 施虎,龚国芳,杨华勇,汪慧. 盾构掘进机推进力计算模型[J]. J4, 2011, 45(1): 126-131.
[15] 苏锋, 蒋晔, 蔡永昌. 钢管混凝土梁柱节点受力性能有限元分析[J]. J4, 2010, 44(10): 1876-1882.