Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)  2017, Vol. 51 Issue (9): 1824-1833    DOI: 10.3785/j.issn.1008-973X.2017.09.017
机械工程     
基于实测沉降的浮顶储罐变形分析
范海贵, 陈志平, 徐烽, 唐小雨, 苏文强
浙江大学 化工机械研究所, 浙江 杭州 310058
Floating-roof tanks' distortion analysis based on measured settlement
FAN Hai-gui, CHEN Zhi-ping, XU Feng, TANG Xiao-yu, SU Wen-qiang
Institute of Process Equipment and Control Engineering, Zhejiang University, Hangzhou 310058, China
 全文: PDF(2684 KB)   HTML
摘要：

基于实测沉降数据，研究浮顶储罐在不均匀沉降作用下的变形响应.采用经典弹性力学理论，推导储罐在不均匀沉降作用下的径向位移理论公式.采用有限元模拟方法，分别应用实体单元和壳单元模拟储罐在不均匀沉降作用下的变形响应，将模拟结果与理论公式计算结果进行比较与分析.在此基础上，采用双指数衰减函数拟合法，推导含顶部抗风圈储罐在不均匀沉降下的径向位移理论公式.将有限元模拟方法与理论公式进行比较和验证，结果表明：对于具有不同尺寸、不同结构形式抗风圈的储罐，该理论公式可以准确地应用于计算其在不均匀沉降作用下的变形情况，预测在役储罐可能的失效模式.
Abstract:

The distortion behavior of floating-roof tanks under differential settlement was investigated based on measured settlement. The radial displacement formula of tanks under uneven settlement was derived by applying the classical elasticity theory. Using finite element method, distortion response of tanks under uneven settlement was simulated by solid element and shell element, respectively. Results of theoretical formula and finite element method were compared and analyzed. Based on that, double exponential attenuation function fitting method was applied to obtain the radial displacement formula of tanks with eave wind girder under uneven settlement. The finite element simulation method was applied to compare with the formula and verify it. Results show that for tanks with eave wind girders which have different forms and sizes, the formula can be used to calculate tanks distortion under uneven settlement accurately, thus to predict the potential failure modes of in-service tanks.
收稿日期: 2016-08-13 出版日期: 2017-08-25
CLC:  TU33  
基金资助:

浙江省省级质监科研计划资助项目（20140239）.
通讯作者: 陈志平,男,教授.orcid.org/0000-0002-5016-2919.     E-mail: zhiping@zju.edu.cn
作者简介: 范海贵(1989-),男,博士生,从事大型储罐安全稳定性研究.orcid.org/0000-0002-8628-1362.E-mail:fhgzrc@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

范海贵, 陈志平, 徐烽, 唐小雨, 苏文强. 基于实测沉降的浮顶储罐变形分析[J]. 浙江大学学报(工学版), 2017, 51(9): 1824-1833.

FAN Hai-gui, CHEN Zhi-ping, XU Feng, TANG Xiao-yu, SU Wen-qiang. Floating-roof tanks' distortion analysis based on measured settlement. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(9): 1824-1833.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2017.09.017    或    http://www.zjujournals.com/eng/CN/Y2017/V51/I9/1824

[1] FAN H G, CHEN Z P, FENG W Z, et al. Buckling of axial compressed cylindrical shells with stepwise variable thickness[J]. Structural Engineering and Mechanics, 2015, 54(1):87-103.
[2] CHEN Z P, DUAN Y Y, SHEN J M, et al. A simplified method for calculating the stress of a large storage tank wall[J]. Proceedings of the Institution of Mechanical Engineers, Part E:Journal of Process Mechanical Engineering, 2007, 221(3):119-127.
[3] FAN H G, CHEN Z P, SHEN J M, et al. Buckling of steel tanks under measured settlement based on Poisson curve prediction model[J]. Thin-Walled Structures, 2016, 106:284-293.
[4] 康杰,徐晓红,郭寥廓.软土地基储罐群产生不均匀沉降原因及纠偏[J].炼油技术与工程,2010(10):57-60. KANG Jie, XU Xiao-hong, GUO Liao-kuo. Analysis and correction of uneven settlement of tank group in soft soil area[J]. Petroleum Refinery Engineering,2010(10):57-60.
[5] KAMYAB H, PALMER S C. Analysis of displacements and stresses in oil storage tanks caused by differential settlement[J]. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 1989, 203(1):61-70.
[6] 傅伟庆,武铜柱,许莉.大型浮顶油罐技术发展[J].化工设备与管道,2013,50(4):1-5. FU Wei-qing, WU Tong-zhu, XU Li. Technical development of large floating roof oil tank[J]. ProcessEquipment and Piping, 2013, 50(4):1-5.
[7] ZHAO Y, CAO Q S, XIE X Y. Floating-roof steel tanks under harmonic settlement:FE parametric study and design criterion[J]. Journal of Zhejiang University SCIENCE A, 2006, 7(3):398-406.
[8] CHEBARO M R, YOOSEF-GHODSI N, YUE H K. Steel storage tank shell settlement assessment based on finite element and API standard 653 analysis[C]//20087th International Pipeline Conference. Calgary:ASME, 2008:395-399.
[9] 石磊,帅健,许葵.基于FEA模型和API653的大型油罐基础沉降评价[J].中国安全科学学报,2014,24(3):114-119. SHI Lei, SHUAI Jian, XU Kui. Assessment of large-scale oil tanks foundation settlement based on FEA model and API 653[J]. China Safety Science Journal, 2014, 24(3):114-119.
[10] 石磊,帅健,许葵.大型油罐基础沉降国内外评价标准对比[J].油气储运,2014,33(8):862-868. SHI Lei, SHUAI Jian, XU Kui. Comparison of evaluation standards for large oil tank foundation settlement in China and abroad[J]. Oil and Gas Storage and Transportation, 2014, 33(8):862-868.
[11] AYARI H, TRUONG D, SEHN J, et al. A nonlinear finite element study on settlement and releveling procedure of a large deformed steel tank[J]. Journal of Pressure Vessel Technology, 2014, 136(3):034-502.
[12] ZHAO Y, LEI X, WANG Z, et al. Buckling behavior of floating-roof steel tanks under measured differential settlement[J]. Thin-Walled Structures, 2013, 70:70-80.
[13] CALLADINE C R. Theory of shell structures[M]. Cambridge:Cambridge University Press, 1989:407.
[14] CHEN D Y, FAN H G, SHEN J M, et al. Research of curve fitting method on the measured settlement of tanks[J]. Procedia Engineering, 2015, 130:400-407.
[15] 石亦平,周玉蓉.ABAQUS有限元分析实例详解[M].北京:机械工业出版社,2006:60-62.
[16] 中华人民共和国住房和城乡建设部.立式圆筒形钢制焊接油罐设计规范:GB 50341-2014[S]. 北京:中国计划出版社, 2014:47.
[17] GONG J, TAO J, ZHAO J, et al. Effect of top stiffening rings of open top tanks on critical harmonic settlement[J]. Thin-Walled Structures, 2013, 65:62-71.
[1] 肖南, 苗永志, 赵文争. 子午向几何缺陷冷却塔的结构性能分析[J]. J4, 2010, 44(4): 819-825.