能源与机械工程 |
|
|
|
|
基于响应面模型的广义空间切削稳定性研究 |
黄华1,2, 张树有1, 刘晓健1, 何再兴1 |
1.浙江大学 流体传动及控制国家重点实验室,浙江 杭州 310027;2.兰州理工大学 机电工程学院,甘肃 兰州 730050 |
|
Research on cutting stability of generalized manufacturing space based on response surface mode |
HUANG Hua1,2, ZHANG Shu-you1, LIU Xiao-jian1, HE Zai-xing1 |
1.State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China; 2. School of Mechanical and Electrical Engineering, Lanzhou University of Science and Technology, Lanzhou 730050, China |
[1] ALTINTAS Y. Manufacturing Automation\[M\]. Cambridge: Cambridge University Press, 2000.
[2] 刘强, 李忠群. 数控铣削加工过程仿真与优化-建模、算法与工程应用[M]. 北京:航空工业出版社, 2011.
[3] HUNG Jui-pin, LAI Yuan-lung, LIN Ching-yuan. Modeling the machining stability of a vertical milling machine under the influence of the preloaded linear guide [J]. International Journal of Machine Tools and Manufacture, 2011, 51(9): 731-739.
[4] ZULAIKA J J, CAMPA F J, LOPEZ L N. An integrated process machine approach for designing productive and lightweight milling machines [J]. International Journal of Machine Tools and Manufacture,2011, 51(7): 591-604.
[5] GRAHAM E, MEHRPOUYA M, PARK S S. Robust prediction of chatter stability in milling based on the analytical chatter stability [J]. Journal of Manufacturing Processes, 2013, 15(4): 508-517.
[6] 刘海涛, 赵万华. 基于广义加工空间概念的机床动态特性分析[J].机械工程学报,2010,46(21):54-60.
LIU Hai-tao, ZHAO Wan-hua. Dynamic characteristic analysis for machine tools based on concept of generalized manufacturing space [J]. Journal of Mechanical Engineering, 2010, 46(21): 54-60.
[7] MOHIT L, ALTINTAS Y, SRIKANTH A. Rapid evaluation and optimization of machine tools with position dependent stability [J]. International Journal of Machine Tools and Manufacture, 2013, 68 (3): 81-90.
[8] SCHMITZ T L, DAVIES M A, KENNEDY M D. Tool point frequency response prediction for high-speed machining by RCSA [J]. Journal of Manufacturing Science and Engineering, 2001, 123(4): 700-707.
[9] 关振群,顾元宪, 张洪武, 等.三维CAD/CAE一体化的参数化动态有限元建模[J].计算机集成制造系统,2003, 9(12): 2112-2119.
GUAN Zhen-qun, GU Yuan-xian, ZHANG Hong-wu, et al. A parameterized method for 3D finite element modeling based on CAD/CAE [J]. Integration Computer Integrated Manufacturing Systems, 2003, 9 (12): 2112-2119.
[10] 廖伯瑜, 周新民, 尹志宏.现代机械动力学及其工程应用[M].北京: 机械工业出版社,2004.
[11] 蒋书运, 祝书龙.带滚珠丝杠副的直线导轨结合部动态刚度特性[J].机械工程学报,2010,46(1): 92-99.
JIANG Shu-yun, ZHU Shu-long. Dynamic characteristic parameters of linear guideway joint with ball screw [J]. Journal of Mechanical Engineering, 2010, 46(1): 92-99. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|