[1] HU Y, SHAO Y, CHEN Z, et al. Transient meshing performance of gears with different modification coefficients and helical angles using explicit dynamic FEA [J] Mechanical Systems and Signal Processing, July, 2011,25(5): 1786-1802.
[2] LIN T J, OU H, LI R F. A finite element method for 3D static and dynamic contact/impact analysis of gear drives [J]. Computer Methods in Applied Mechanics and Engineering, 2007,196(9/12): 1716-1728.
[3] 华顺刚,余国权,苏铁明.基于ADAMS的减速器虚拟样机建模及动力学仿真[J].机械设计与研究,2006,22(6): 47-52.
HUA Shun-gang, YU Guo-quan, SU Tie-ming. Modeling and dynamic simulation of reducer virtual prototype based on ADAMS [J]. Machine Design and Research, 2006,22(6): 47-52.
[4] 黄泽平,马吉胜,李伟,等.齿轮副啮合冲击仿真研究[J].先进制造与管理,2006,25(10): 27-29.
HUANG Ze-ping, MA Ji-sheng, LI Wei, et.al. Study on gear pair meshing impact simulation [J]. Advanced Manufacture and Management, 2006,25(10): 27-29.
[5] 龙凯,程颖.齿轮啮合力仿真计算的参数选取研究[J].计算机仿真,2002,19(6): 87-88,91.
LONG Kai, CHENG Ying. The research of parameters by the simulation of exciting force in gears [J]. Computer Simulation, 2002,19(6): 87-88,91.
[6] 李金玉,勾志践,李媛.基于ADAMS的齿轮啮合过程中的齿轮力的动态仿真[J].机械设计与研究, 2005,32(3): 15-17.
LI Jin-yu, GOU Zhi-jian, LI Yuan. A dynamic simulation of meshing force in gear meshing process based on ADAMS [J]. Journal of Machine Design and Research, 2005,32(3): 15-17.
[7] 崔清斌,吴大林,康海英.基于ADAMS的齿轮传动系统动态特性仿真[J].军械工程学院学报, 2004,16(5): 9-11,16.
CUI Qing-bin, WU Da-lin, KANG Hai-ying. Study on dynamics characteristics about gear transmission based on ADAMS [J]. Journal of Ordnance Engineering College, 2004,16(5): 9-11,16.
[8] 胡宗成,王娟,王隽,等.舰船大功率减速器动态抗冲击性能分析[J].舰船科学技术,2008,30(4): 50-53.
HU Zongcheng, WANG Juan, WANG Jun, et.al. Analysis of the dynamic concussion influence to the high-power speed reducer of marine [J]. Ship Science and Technology, 2008, 30(4): 50-53.
[9] 蒋庆磊,武鹏,王乐勤,等.齿式离合器结合过程动态特性的仿真[J].机械设计,2009,26(3)20-23.
JIANG Qing-lei, WU Peng, WANG Le-qin, et.al. Simulative research on dynamic characteristics of meshing process of toothed clutch [J]. Journal of Machine Design, 2009,26(3): 20-23.
[10] HUSEYIN F I, EVERCIOGLU O. Evaluation of gear tooth stresses by finite element method [J]. Journal of Engineering for Industry, May,1995,117(2): 232-239.
[11] KARPAT F, STEPHEN E O, CAVDAR K, FATIH C. B. Dynamic analysis of involute spur gears with asymmetric teeth [J]. International Journal of Mechanical Sciences, Dec,2008,50(12): 1598-1610.
[12] WANG P Y, FAN S C, HUANG Z G. Spiral bevel gear dynamic contact and tooth impact analysis [J]. Journal of Mechanical Design, 2011,133(8): 1-6.
[13] CENTEA D, RAHNEJAT H, MENDAY M T. Non-linear multi-body dynamic analysis for the study of clutch torsional vibrations (judder) [J]. Applied Mathematical Modelling, 2001,25(3): 177-192.
[14] 武宝林,杨素君,姚俊红.齿轮传动中啮合冲击的理论分析[J].机械科学与技术,2003,22(1): 55-57.
WU Baolin, YANG Sujun, YAO Junhong. Theoretical analysis on meshing impact of involute gears [J]. Mechanical Science and Technology, 2003,22(1): 55-57.
[15] 盛云,武宝林.齿轮传动中啮合冲击的计算分析[J].机械设计,2005,22(7): 41-43.
SHENG Yun, WU Bao-lin. Calculation analysis on meshing impact in gear transmission [J]. Journal of Machine Design, 2005,22(7): 41-43.
[16] 陈玲,侯艳军,田作奎.汽车齿轮动态响应的有限元分析[J].机械设计, 2003, 20(6): 48-49.
CHEN Ling, HOU Yan-jun, TIAN Zho-kui. Finite element analysis of dynamic response for car-s gear [J]. Journal of Machine Design, 2003,20(6): 48-49.
[17] 张永友.某输出齿轮的冲击有限元分析[J].机械制造与研究,2008,37(1): 55-59.
ZHANG Yong-you. Finite element analysis of a gear [J]. Machine Building & Automation, 2008,37(1): 55-59.
[18] 冀相安,马永明,桂文彬,等.一种同步离合器棘轮棘爪机构棘合过程的仿真分析[J].船舶工程,2005,27(4): 41-44.
JI Xiang-an, MA Yong-ming, GUI Wen-bin, et.al. Simulation analysis of engagement process for ratchetpawl mechanism in a synchronizing clutch [J]. Ship Engineering, 2005,27(4): 41-44.
[19] 王言正,徐筱欣. 基于ADAMS的新型大功率离合器同步机构的仿真研究[J].造船技术, 2006,265(3): 44-46. |