Please wait a minute...
J4  2010, Vol. 44 Issue (9): 1754-1759    DOI: 10.3785/j.issn.1008-973X.2010.09.020
土木与水利工程     
开槽法测试混凝土工作应力的试验研究
王柏生,沈旭凯,林湘祁
浙江大学 结构工程研究所,浙江 杭州 310058
Experimental study on working stress measurement of concrete
 by grooving method
WANG Bai-sheng, SHEN Xu-kai, LIN Xiang-qi
Institute of Structural Engineering, Zhejiang University, Hangzhou 310058, China
 全文: PDF  HTML
摘要:

为了解决混凝土结构工作应力测试中存在的困难,通过有限元数值模拟,分析了开槽法释放混凝土工作应力随开槽深度的变化规律,与环孔法进行了比较,得到了工作应力能全部释放的开槽深度.在分析了通过应力释放进行工作应力检测的各种影响因素后,着重就开槽引起的扰动应变展开试验研究,得到了混凝土骨料直径、开槽间距、工作应变大小等与扰动应变间的关系,据此可以估计检测时的扰动应变,进而对检测结果进行修正,试验验证表明:修正后检测结果的误差较小,完全满足工程中的要求.

Abstract:

Measuring the working stress is an important manner for reliability assessment of existing concrete structures. Compared to ring-hole method, the stress releasing relation to grooving depth on concrete by grooving method was analyzed by FEM numerical simulation. The grooving depth in which the stress is wholly released was obtained. After analyzing the factors impacting on the working stress measurement of concrete by stress releasing, this work mainly studied the groove induced disturbance strain through experiment. The relations of disturbance strain with aggregate diameter, distance of two grooves and working stress were established. The groove induced disturbance strain in working stress measurement can be estimated based on these relations. And then the measurement result can be corrected. The test results show that the errors of the corrected working strains measured are small and meet the engineering requirements.

出版日期: 2010-09-01
:  TU 472.5  
基金资助:

国家科技支撑计划资助项目(2006BAJ03A02-02)

作者简介: 王柏生(1965-),男,浙江浦江人,博士,研究员,从事结构工程的教学科研工作.E-mail:wangbs@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

王柏生, 沈旭凯, 林湘祁. 开槽法测试混凝土工作应力的试验研究[J]. J4, 2010, 44(9): 1754-1759.

WANG Bai-Sheng, CHEN Xu-Kai, LIN Xiang-Qi. Experimental study on working stress measurement of concrete
 by grooving method. J4, 2010, 44(9): 1754-1759.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.09.020        http://www.zjujournals.com/eng/CN/Y2010/V44/I9/1754

[1] MATHER J. Determination of initial stress by measuringthe deformation around drilled Hole[J]. Trans ASME, 1934,56:103114.
[2] REDNER S. Measurement of residual stresses by blind hole drilling method, principle and application\
[R\].Malvem, Pa., USA:  Photoelastic Inc, A Subsidary of Vishay Intertechnology, Inc. Lincoln HWY,  1971.
[3] 胡春农.小盲孔松弛法测定焊接钢结构的残余应力[J].土木工程学报,1982,15(1):2737.
HU Chunnong. Small blind hole relaxation method for determination of residual stresses in welded steel structures[J]. China Civil Engineering Journal, 1982, 15(1):2737.
[4] 杨新华. 开槽法测试结构工作应力的有限元分析[J].建筑结构,1998(4):5052.
YANG Xinhua. Finite element analysis of inspection of structural working stresses by Grooving Method[J]. Building Structure, 1998(4):5052.
[5] 吴东云,杨树标,安新正.钢结构工作应力测定试验研究[J].煤矿设计,2000(6):2728.
WU Dongyun, YANG Shubiao, AN Xinzheng. Experimental study of working stress testing of steel structures[J]. Coalmine Design, 2000(6):2728.
[6] 张书良.建筑结构工作应力检测新方法[J].深圳职业技术学院学报,2002(2):1420.
ZHANG Shuliang. New method forconstruction structural stress measurement and test[J]. Journal of Shenzhen Polytechnic, 2002(2):1420.
[7] 曾宏,盛国赛,谢晓锋,等. 盲孔法测量钢结构工作应力试验研究[J].广东土木与建筑, 2006(4):4852.
ZENG Hong, SHENG Guosai, XIE Xiaofeng, et al. Experimental study on working stress testing on the steel structures by the Blind Hole Drilling method[J]. Guangdong Architecture Civil Engineering, 2006(4):4852.
[8] 杨勇,王灿,朱新实.既有桥梁结构混凝土现存应力测量与分析[J].同济大学学报,1999,27(2):198202.
YANG Yong, WANG Can, ZHU Xinshi. Measurement and analysis of existing stress in concrete bridge structures[J]. Journal of Tongji University, 1999, 27(2):198202.
[9] 翁冠群.桥梁预应力损失检测技术及安全评估[C]∥2001年全国公路桥梁维修与加固技术研讨会.台湾:[ s.n.],2001.
WUN Guanqun. Prestresslossing detection technology and security assessments of bridges[C]∥The Highway Bridge Repair and Strengthen Technical Seminar.Taiwan:  [s.n.],2001.
[10] 刘永淼,环孔法检测混凝土工作应力的试验研究[D].杭州:浙江大学,2006.
LIU Yongmiao. Experimental research on the working stress measurement of concrete by the ringhole method[D]. Hangzhou: Zhejiang University, 2006.
[11] 刘永淼,王柏生,沈旭凯. 环孔法检测混凝土工作应力的试验研究[J],建筑结构学报,2006,27(增2):776778,782.
LIU Yongmiao, WANG Baisheng, SHEN Xukai. Experimental research on the working stress of measurement on concrete by the RingHole method[J]. Journal of Building Structures,2006,27(supplemet 2):776778,782.
[12] 付波,向洪,袁铜森.钢筋混凝土桥梁工作应力测试研究[J],湖南交通科技,2007,33(2):6871.
FU Bo, XIANG Hong, YUAN Tongsen. Research on working stress testing on RC bridges[J]. Hunan Communication Science and Technology, 2007, 33(2):6871.
[13] 王海龙、李庆斌.饱和混凝土的弹性模量预测[J].清华大学学报:自然科学版,2005,45(6):761763,755.
WANG Hailong, LI Qingbin. Saturated concrete elastic modulus prediction[J]. Journal of Tsinghua University:Science and Technology, 2005, 45(6):761763,755.

No related articles found!