Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)  2017, Vol. 51 Issue (8): 1575-1586    DOI: 10.3785/j.issn.1008-973X.2017.08.013
机械与能源工程     
基于曲率积分的双金属复合板辊式矫直过程解析
张超, 臧勇, 管奔, 秦勤
北京科技大学 机械工程学院, 北京 100083
Analysis of bimetal composite plate roller leveling process based on curvature integration method
ZHANG Chao, ZANG Yong, GUAN Ben, QIN Qin
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
 全文: PDF(1978 KB)   HTML
摘要：

分析双金属复合板矫直过程的截面弯曲特性，建立双金属复合板任意加卸载时的弯矩-曲率关系.对矫直过程的板材进行划分，弹性矫直区间段根据弹性加载的弯矩-曲率关系积分求解曲率变化量积分值，弹塑性矫直区间段按曲率差值等分离散后求解曲率变化量积分值，建立双金属复合板曲率积分解析模型.解析了钢-铝复合板辊式矫直过程，与单一材料板材的矫直过程进行对比.结果表明，钢-铝复合板在矫直过程中会出现中性层偏移.矫后钢-铝复合板基层残余应力较小而覆层发生反向屈服.反向屈服会削弱复合板的回弹，且具有累积效应.
Abstract:

Section bending properties of bimetal composite plate during leveling were analyzed and moment-curvature relationship under arbitrary loading and unloading was built. Plate was divided during leveling, For the elastic leveling region, the integral value of the curvature change was solved based on the moment-curvature relationship of elastic loading; For the elastic-plastic leveling region, the integral value of the curvature change was solved by discrete curvature according to the equally curvature difference. Then bimetal composite plate curvature integration model was constructed. Steel clad aluminum composite plate's roller leveling process was analyzed and compared with the single material plate roller leveling process. Results show that there is neutral layer migration during steel clad aluminum composite plate roller leveling process. The residual stress of the base layer of the composite plate is small and the clad layer happen reverse yield after leveling. The reverse yield can weaken the rebound of the composite plate and has a cumulative effect.
收稿日期: 2016-06-27 出版日期: 2017-08-16
CLC:  TG333  
基金资助:

国家"863"高科技研究发展计划资助项目（2013AA031302）；中国博士后科学基金资助项目（2014M550611）；北京市自然科学基金青年科学基金资助项目（3154036）.
通讯作者: 管奔,男,讲师.ORCID:0000-0001-6719-8777.     E-mail: niuben57@163.com
作者简介: 张超(1990-),男,博士生,从事塑性加工工艺等研究.ORCID:0000-0002-2986-8183.E-mail:18810645343@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

张超, 臧勇, 管奔, 秦勤. 基于曲率积分的双金属复合板辊式矫直过程解析[J]. 浙江大学学报(工学版), 2017, 51(8): 1575-1586.

ZHANG Chao, ZANG Yong, GUAN Ben, QIN Qin. Analysis of bimetal composite plate roller leveling process based on curvature integration method. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(8): 1575-1586.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2017.08.013    或    http://www.zjujournals.com/eng/CN/Y2017/V51/I8/1575

[1] WU Chih-Ping, LIU Yan-Cheng. A review of semi-analytical numerical methods for laminated composite and multilayered functionally graded elastic/piezoelectric plates and shells[J]. Composite Structures, 2016, 147:1-15.
[2] 刘环,郑晓冉.层状金属复合板制备技术[J].材料导报:纳米与新材料专辑,2012,26(2):131-134. LIU Huan, ZHEN Xiao-ran. The manufacturing technique of clad metals sheet[J]. Materials Review:Album of Nanomaterials and New Materials, 2012, 26(2):131-134.
[3] 崔甫.矫直原理与矫直机械[M].2版.北京:冶金工业出版社, 2002:157-160.
[4] CHEN Wei-hua, LIU Juan, CUI Zhen-shan, et al. A 2.5-dimensional analytical model of cold leveling for plates with transverse wave defects[J]. Journal of Iron & Steel Research International, 2015, 22(8):664-671.
[5] PHILIPPAUS V, MAILLLARD S. Modern levelers for advanced plate grade[J]. Iron Steel Review, 2009, 52(10):144.
[6] KADOTA K, MAEDA R. A model of analysis of curvature in leveling process-numeric study of roller leveling process[J]. Journal of Japan Society for Technology of Plasticity, 1993, 34(1):690-697.
[7] HIGO T, MATSUMOTO H, OGAWA S. Effects of numerical expression of stress-stain curve on curvature of material of roller leveling process[J]. Journal of Japan Society for Technology of Plasticity, 2002, 43(496):439-443.
[8] 薛军安.中厚板矫直过程的理论分析及其控制系统[D].沈阳:东北大学,2009:34-43. XUE Jun-an. Theoretical analysis for plate leveling process and its control system[D]. Shenyang:Northeastern University, 2009:34-43.
[9] LIU Zhi-fang, WANG Yong-qin, YAN Xing-chun. A new model for the plate leveling process based on curvature integration method[J]. International Journal of Mechanical Sciences, 2012, 54:213-224.
[10] 管奔,臧勇,逄晓男,等.矫直过程截面复杂反弯的应力分布与反弯特性解析[J].中南大学学报:自然科学版,2012,43(5):1740-1745. GUAN Ben, ZANG Yong, PANG Xiao-nan, et al. Stress distribution and reverse bending behavior of section during roller leveling process[J]. Journal of Central South University:Science and Technology, 2012, 43(5):1740-1745.
[11] 刘东冶,何安瑞,王海滨,等.塑性强化材料矫直反弯特性研究[J].机械工程学报,2015,51(8):76-83. LIU Dong-ye, HE Rui-an, WANG Hai-bin, et al. Reverse bending research of leveling on plastic hardening material[J]. Journal of Mechanical Engineering, 2015,51(8):76-83.
[12] LI CUI, SHI Quan-qiang, LIU Xiang-hua, HU Xian-lei, Residual curvature of longitudinal profile plate roller in leveling process[J]. Journal of Iron and Steel Research, 2013, 20(10):23-27.
[13] SUN Xian-jun, TAO Jie, GUO Xun-zhong. Bonding properties of interface in Fe/Al clad tube prepared by explosive welding[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(10):2175-2180.
[14] 余同希,章亮炽.塑性弯曲理论及其应用[M].北京科学出版社, 1992:23-27
No related articles found!