Please wait a minute...
浙江大学学报(工学版)
能源与环境工程     
PMMA表面与深度吸收热解过程数值模拟
龚俊辉, 陈怡璇, 李劲, 周洋
1. 南京工业大学 安全科学与工程学院,江苏 南京 211816;
2. 纽黑文大学 火灾科学系,美国 康涅狄格州 西黑文市 06516;
3. 中南大学 消防工程系,湖南 长沙 410075
Numerical simulation of pyrolysis of PMMA involving surface and in-depth absorption
GONG Jun hui, CHEN Yi xuan, LI Jin, ZHOU Yang
1. College of Safety Science and Engineering, Nanjing Tech University, Nanjing 211816, China;
2. Department of Fire Science, University of New Haven, West Haven 06516, United States;
3. Department of Fire Protection Engineering, Central South University, Changsha 410075, China
 全文: PDF(5074 KB)   HTML
摘要:

通过建立一维热解模型,对聚甲基丙烯酸甲酯(PMMA)在外界辐射热流密度条件下的热解过程进行数值模型的构建,研究表面吸收和深度吸收这两种文献中用的较多且相对极端的吸收方式对材料热解过程的影响.该数学模型对锥型量热仪氮气气氛下材料热解实验过程进行模拟,包括质量损失速率、材料内部温度分布、表面和背面温度.通过与已经发表的相应实验数据对比,对模型的可靠性进行验证.结果表明,不同的吸收模式对热解细节有较大的影响,如材料内部温度分布、表面温度和热解开始时间等.在预测实验尺寸条件下的热解过程时,两种吸收模式的模拟结果均在可接受范围之内.

Abstract:

 The effects of absorption models on the gasification process of PMMA exposed to an incident heat flux were investigated. A numerical one-dimension model was established to analyze the influence of absorption mode, including surface and in-depth absorption, on pyrolysis process of clear PMMA sample which was exposed to an external heat flux. The corresponding cone calorimetry tests in nitrogen atmosphere that were conducted by the developed model. Some important simulation results were discussed, including mass loss rate, top and bottom surface temperature, temperature distribution in solid. The capability of the model was verified by the comparison between experimental and simulation results. Results showed that some detailed behaviors of the thermal degradation were significantly affected by the absorption modes, like temperature in solid, top surface temperature and initiation of pyrolysis etc. Both hypotheses were acceptable within predicting bench scale experiments.

出版日期: 2016-10-28
:  X 932  
基金资助:

国家自然科学基金青年基金资助项目(51506081);  江苏省自然科学基金资助项目(BK20150954);  中国科技大学火灾科学国家重点实验室开放课题资助项目(HZ2015KF09).

作者简介: 龚俊辉(1986—),男,讲师,博士,从事聚合物材料热解及火蔓延的研究. ORCID: 0000-0003-0101-7448. E-mail: gjh9896@njtech.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

龚俊辉, 陈怡璇, 李劲, 周洋. PMMA表面与深度吸收热解过程数值模拟[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2016.10.007.

GONG Jun hui, CHEN Yi xuan, LI Jin, ZHOU Yang. Numerical simulation of pyrolysis of PMMA involving surface and in-depth absorption. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2016.10.007.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2016.10.007        http://www.zjujournals.com/eng/CN/Y2016/V50/I10/1879

[1] RICHARD N W, NATALLIA S, RICHARD E L. A microscale combustion calorimeter study of gas phase combustion of polymers [J]. Combustion and Flame, 2015, 162(3): 855-863.
[2] DAI Jiakun, MICHAEL A D, YANG Lizhong, et al. Piloted ignition and extinction for solid fuels [J]. Proceeding of the Combustion Institute, 2013, 34(2): 2487-2495.
[3] EGOLFOPOULOS F N, HANSEN N, JU Y, et al. Advances and challenges in laminar flame experiments and implications for combustion chemistry [J]. Progress in Energy and Combustion Science, 2014, 43(6): 36-67.
[4] MASTORAKOS E. Ignition of turbulent nonpremixed flames [J]. Progress in Energy and Combustion Science, 2009, 35(1): 57-97.
[5] FERERES S, FERNANDEZPELLO C, URBAN D L, et al. Identifying the roles of reduced gravity and pressure on the piloted ignition of solid combustibles [J]. Combustion and Flame, 2015, 162(4): 1136-1143.
[6] JIANG Fenghui, DE RIS J L, KHAN M M. Absorption of thermal energy in PMMA by indepth radiation [J]. Fire Safety Journal, 2009, 44(1): 106-112.
[7] LINTERIS G, ZAMMARANO M, WILTHAN B, et al. Absorption and reflection of infrared radiation by polymers in firelike environments [J]. Fire and Materials, 2012, 36(7): 537-553.
[8] INCROPERA F P, DEWITT D P, BERGMAN T L, et al. Fundamentals of heat and mass transfer [M]. 6th ed.New York: Wiley, 2007: 752.
[9] WHITING P, DOWDEN J M, KAPADIA P D, et al. A onedimensional mathematical model of laser induced thermal ablation of biological tissue [J]. Lasers in Medical Science, 1992, 7 (7): 357-368.
[10] BILLINGS M J, WARREN L, WILKINS R. Thermalerosion of electrical insulating materials [J]. IEEE Transaction on Electron Insulation, 1971, 6(2): 82-90.
[11] DELICHATSIOS M A, CHEN Y. Asymptotic, approximate and numerical solutions for the heatup and pyrolysis of materials including reradiation losses [J]. Combustion and Flame, 1983, 92(3): 292-307.
[12] QUINTIERE J, IQBAL N. An approximate integral model for the burning rate of a thermoplasticlike material [J]. Fire and Materials, 1994, 18(2): 89948.
[13] STAGGS J E J. A discussion of modeling idealized ablative materials with particular reference to fire testing [J]. Fire Safety Journal, 1997, 28(1): 47-66.
[14] TEWARSON A, PION R F. Flammability of plasticsI. burning intensity [J]. Combustion and Flame, 1976, 26(6): 85-103.
[15] DI BLASI C, WICHMAN I S. Effects of solidphase properties on flames spreading over composite materials [J]. Combustion and Flame, 1995, 102(3): 229-240.
[16] 金杨.不同热流条件下聚合物的热解动力学研究[D].青岛:青岛科技大学,2004.
JIN Yang. Thermal decomposition and kinetics of polymers exposed to varied heat fluxes [D]. Qingdao: Qingdao University of Science and Technology, 2004.
[17] STAGGS J E J, WHITELEY R H. Modeling thermal degradation of polymers using singlestep firstorder kinetics [J]. Fire Safety Journal, 1999, 32(1): 17-34.
[18] 徐亮,伍卫军,丁严艳.典型热塑性聚合物热解行为研究[J].火灾科学,2010,19(3): 143-149.
XU Liang, WU Weijun, DING Yanyan. Investigation on thermal degradation behavior of typical thermoplastics polymer [J]. Fire Safety Science, 2010,19(3): 143-149.
[19] STAGGS J E J. A theoretical investigation into modeling thermal degradation of solids incorporating finite rate kinetics [J]. Combust Science and Technology, 1997, 123(1): 261-285.
[20] WICHMAN I S, ATREYA A. A simplified model for the pyrolysis of charring materials [J]. Combustion and Flame, 1987, 68(3): 231-247.
[21] STOLIAROV S I, WALTERS R N. Determination of the heats of gasification of polymers using differential scanning calorimetry [J]. Polymer Degradation and Stability, 2008, 93(2): 422-427.
[22] STOLIAROV S I, LYON R E. ThermoKinetic model of burning [EB/OL]. 2008-08-17. http:∥www.fire.tc.faa.gov/reports/reports.asp.
[23] HALLMAN J R, WELKER J R, SLIEPCEVICH C M. Ignition of polymers Ignition time depends on incident irradiance, the nature of the radiation source, and the optical properties of the material [J]. SPE Journal, 1972, 28(3): 43-47.
[24] HALLMAN J R, SLIEPCEVICH C M, WELKER J R. Radiation absorption for polymers: the radiant panel and carbon arcs as radiant heat source [J]. Plos One, 2013, 8(3): 462469.
[25] LINAN A, WILLIAMS F A. Radiant ignition of areactive solid with indepth absorption [J]. Combustion and Flame, 1972, 18(1): 85-97.
[26] DELICHATSIOS M A, SAITO K. Upward fire spread: key flammability properties, Similarity solution and flammability indices [R]. Rhode Island: FM Global, 1991.
[27] TSILINGIRIS P T. Comparative evaluation of theinfrared transmission of polymer films [J]. Energy Conversion and Management, 2003, 44(18): 2839-2856.
[28] Thermal conductivity of air vs. temperature \[EB/OL\]. 20100124. http:∥bouteloup.pierre.free.fr/lica/phythe/don/air/air_k_plot.pdf.
[29] Kinematic viscosity of air vs. temperature \[EB/OL\]. 20100124. http:∥bouteloup.pierre.free.fr/lica/phythe/don/air/air_nu_plot.pdf.
[30] LAUTENBERGER C, FERNANDEZPELLO C A. Generalized pyrolysis model for combustible solids[C]∥Fire Safety ScienceProceedings of the 8th International Symposium. Beijing: The International Association for Fire Safety Science, 2005: 445-456.
[31] LI J. A multiscale approach to parameterization of burning models for polymeric materials [D]. Maryland: College Park, University of Maryland, 2014.

[1] 龚俊辉, 陈怡璇, 王志荣, 蒋军成, 李劲, 周洋. 非碳化聚合物两种热流吸收模式热解机理[J]. 浙江大学学报(工学版), 2017, 51(4): 784-791.