[1] 漆小波,曾涛,黄卫星,等.循环流化床提升管中团聚物颗粒浓度的实验研究[J].四川大学学报,2005, 37(5): 46-50.
QI Xiaobo, ZENG Tao, HUANG Weixing, et al. Experimental study of solids holdups inside particle clusters in CFB risers [J]. Journal of Sichuan University, 2005, 37(5): 46-50.
[2] 周浩生,陆继东,刘德昌,等. 循环流化床稀相区流动结构的实验研究[J].燃烧科学与技术,1998, 4(4): 391-395.
ZHOU Haosheng, LU Jidong, LIU Dechang, et al. Flow structure in circulating fluidized bed riser [J]. Journal of Combustion Science and Technology, 1998, 4(4): 391-395.
[3] ZHU Haiyan, ZHU Jesse, LI Guozheng, et al. Detailed measurements of flow structure inside a dense gassolid fluidized bed [J]. Powder Technology, 2008, 180(3): 339-349.
[4] FAN Xianfeng, DAVID J P, YANG Zhufang, et al. The effect of bed materials on the solid/bubble motion in a uidised bed [J]. Chemical Engineering Science, 2008, 63(4): 943-950.
[5] MARIA L M, UMBERTO A. The effect of particle size and density on solids distribution along the riser of a circulating fluidized bed [J]. Chemical Engineering Science, 1999, 54(22): 5383-5391.
[6] 安恩科,谭厚章,李军,等. CFB主床的床顶结构对边壁下降流的影响[J]. 热力发电,1998(6): 4-6.
AN Enke, TAN Houzhang, LI Jun, et al. Experimental investigation about the down flow on the bed wall in CFB boiler [J]. Thermal Power Generation, 1998(6): 4-6.
[7] 马健,张伟,马天星,等. 炉顶结构对循环流化床锅炉颗粒内循环影响的实验研究[J]. 锅炉技术, 2007, 38(3): 23-28.
MA Jian, ZHANG Wei, MA Tianxing, et al. Experimental study of influence on internal solid particles circulation exerted by exit structure of CFB boiler [J]. Boiler Technology, 2007, 38(3): 23-28.
[8] HARRIS A T, DAVIDSON J F, THORPE R B. The influence of the riser exit on the particle residence time distribution in a circulating fluidized bed riser [J]. Chemical Engineering Science, 2003, 58(16): 3669-3680.
[9] HARRIS A T, DAVIDSON J F, THORPE R B. Particle residence time distributions in circulating fluidized beds [J]. Chemical Engineering Science, 2003, 58(11): 2181-2202.
[10] 刘宝勇,魏绪玲,郭庆杰,等. 大型循环流化床底部区域颗粒浓度波动研究[J]. 兰州交通大学学报, 2009, 28(3): 174-179.
LIU Baoyong, WEI Xuling, GUO Qingjie, et al. Research on particle concentration fluctuation in the bottomzone of a plant circulating fluidized bed [J]. Journal of Lanzhou Jiaotong University, 2009, 28(3): 174-179.
[11] LIN Qian, WEI Fei, JIN Yong. Transient density signal analysis and twophase microstructure flow in gassolid fluidization [J]. Chemical Engineering Science, 2001, 56(6): 2179-2189.
[12] ZHANG Hai, JOHNSTON P M, ZHU J X, et al. A novel calibration procedure for a fiber optic solids concentration probe [J]. Powder Technology, 1998, 100(2/3): 260-272.
[13]TIAN Chen, WANG Qinhui, LUO Zhongyang, et al. Effect of riser geometry structure on local flow pattern in a rectangular circulating fluidized bed [C]∥Proceedings of the 20th International Conference on Fluidized Bed Combustion. Xi’an: Springer, 2009: 464-470.
[14] 黄卫星,漆小波,潘永亮,等. 气固循环床提升管内的局部颗粒浓度及流动发展[J]. 高校化学工程学报, 2002, 16(6): 626-630.
HUANG Weixing, QI Xiaobo, PAN Yongliang, et al. Local solidparticle concentration and flow development in a long CFB riser [J]. Journal of Chemical Engineering of Chinese Universities, 2002, 16(6): 626-630.
[15] 黄素华,陆继东,钱诗智. 矩形平壁循环流化床冷态流动特性研究[J]. 热能动力工程, 1995, 10(3): 144-148.
HUANG Suhua, LU Jidong, QIAN Shizhi. A study on the coldstate flow characteristics of a rectangular flat wall circulating fluidized bed [J]. Journal of Engineering for Thermal Energy and Power, 1995, 10(3): 144-148. |