Please wait a minute...
J4  2012, Vol. 46 Issue (2): 321-326    DOI: 10.3785/j.issn.1008-973X.2012.02.022
机械工程、能源工程     
闪速炼铜余热锅炉辐射室流场温度场数值模拟
钟崴1, 丁晟1, 宋冬根2, 鞠霞2, 童水光1
1.浙江大学 热工与动力系统研究所,浙江 杭州 310027;2.中国瑞林工程技术有限公司,江西 南昌 330002
Numerical simulation of flow and temperature fields in the radiation
chamber of a waste-heat boiler for copper flash smelting
ZHONG Wei1, DING Sheng1, SONG Dong-gen2, JU Xia2, TONG Shui-guang1
1. Institute of Thermal Science and Power Engineering,Zhejiang University,Hangzhou 310027, China;
2. China Nerin Engineering CO.LTD, Nanchang 330002, China
 全文: PDF  HTML
摘要:

针对某大型闪速炼铜炉余热锅炉,提出采用计算流体动力学(CFD)技术模拟锅炉辐射室内流场和温度场的模型和方法.模型中考虑湍流计算、化学组分扩散计算以及传热计算.通过对初始方案和若干调整方案模拟结果的比较分析,掌握在辐射室中部布置挡板,并在辐射室入口处喷入硫酸盐化风时的辐射室流场及温度场总体分布规律.结果表明:辐射室挡板对于高温烟气扩散并充满整个辐射室至关重要,位置和尺寸对流场及温度场的整体形态具有决定性影响;盐化风应喷入到高温烟气的前冲途径上,以有效打散高温烟气团,降低烟气的前冲动能.

Abstract:

According to a large waste-heat boiler for cooper flash smelting, the method and model for simulating the flow and temperature fields in the radiation chamber of boiler were proposed based on CFD technology. Turbulence flow, diffusion of chemical components, and heat transfer were considered in the simulation model. By comparing the original design scheme and some readjustment design schemes, the general distribution rules of the flow and temperature fields in the radiation chamber were generated while a baffle-board was installed in the middle part of the chamber was obtained, as well as the air for sulfation was injected into the entrance of the chamber. The results indicated that the baffle-board was essential for gas diffusion in the chamber in view of its position and size were critical for the main pattern of the flow and temperature fields; the air for sulfation should be injected into the path of the hot gas flow in order to break it up, and to reduce its forward kinetic energy.

出版日期: 2012-03-20
:  TK 229.92  
作者简介: 钟崴(1975—),男,副教授,从事锅炉计算机辅助设计研究.E-mail: zhongw@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

钟崴, 丁晟, 宋冬根, 鞠霞, 童水光. 闪速炼铜余热锅炉辐射室流场温度场数值模拟[J]. J4, 2012, 46(2): 321-326.

ZHONG Wei, DING Sheng, SONG Dong-gen, JU Xia, TONG Shui-guang. Numerical simulation of flow and temperature fields in the radiation
chamber of a waste-heat boiler for copper flash smelting. J4, 2012, 46(2): 321-326.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.02.022        http://www.zjujournals.com/eng/CN/Y2012/V46/I2/321

[1] 曾达云.铜闪速炉余热锅炉的结构特点及其分析[J].有色冶金设计与研究,1995,16(04): 57-62.

ZENG Dayun. Structure features and analysis of wasteheat boiler in flash furnace in copper smelting [J]. Nonferrous Metals Engineering & Research, 1995, 16(04): 57-62.
[2] 江帆,黄鹏.Fluent高级应用与实例分析[M].北京:清华大学出版社,2009: 8-17.
[3] 温正,石良辰,任毅如.Fluent流体计算应用教程[M].北京:清华大学出版社,2009: 81-83.
[4] 杨卫宏,赖亚欣,萧泽强.余热锅炉流场温度场数值计算[J].中国有色金属学报,2000,10(02): 278-281.
YANG Weihong, LAI Yaxin, XIAO Zeqiang. Numerical simulation of flow and temperature fields in waste boiler [J]. The Chinese Journal of Nonferrous Metals, 2000, 10(02): 278-281.
[5] TADASHI K, SUSUMU A, HIRONRI K. Flow visualization of wasteheat boiler using 1/20 scale model and numerical simulation [J]. Progress in Scale Modeling, 2008: 343-355.
[6] 涂俊杰.浅析铜闪速炉余热锅炉中硫酸盐化装置的作用[J].有色冶金设计与研究,1998,19(04):40-44.
TU Junjie. Analysis of air for sulfation in wasteheat boiler in flash furnace in copper smelting [J]. Nonferrous Metals Engineering & Research, 1998, 19(04): 40-44.
[7] 古尔维其 A M,库兹涅佐夫 H B.锅炉机组热力计算标准方法[M].马毓义,译.北京:水利电力出版社,1960: 13-14.
[8] ANSHU B, LARY L. B, ALLEN L R. Effects of intraparticle heat and mass transfer on biomass devolatilization: Experimental results and model predictions[J]. Energy & Fuels, 2004, 18(04): 1021-1031.
[9] ANTONIO G, NORBERTO F, LUIS I D. Modeling and simulation of fluid flow and heat transfer in the convective zone of a powergeneration boiler [J]. Applied Thermal Engineering, 2008, 28: 532-546.
[10] YANG Yongxiang, ARI J, PEKKA T, et al. Using computational fluid dynamics to modify a wasteheat boiler design [J]. Smelter Gas Control, 1999, 51(5): 36-40.
[11] RISTO V. F, ILIJA J. P, PIOTR K. Optimization of pulverized coal combustion by means of CFD/CTA modeling [J]. Thermal Science, 2006, 10(3): 161-179.

[1] 钟崴,杨志群,宋冬根,胡继光,童水光. 闪速炼铜余热锅炉辐射冷却室水动力性能设计[J]. J4, 2013, 47(11): 1970-1975.
[2] 钟崴,崔敏,童水光. 油膜润滑条件下滑动轴承变形与应力数值模拟[J]. J4, 2012, 46(7): 1227-1232.