Please wait a minute...
浙江大学学报(工学版)
J4  2010, Vol. 44 Issue (4): 743-749    DOI: 10.3785/j.issn.1008-973X.2010.04.021
热能工程、动力与电气工程     
裤衩型300 MW循环流化床炉膛二次风数值模拟
郑成航, 程乐鸣, 骆仲泱, 王勤辉, 施正伦, 岑可法
浙江大学 热能工程研究所,能源清洁利用国家重点实验室,浙江 杭州310027
Numerical simulation of the impact of secondary air for a pantleg
300 MW circulation fluidized bed boiler
ZHENG Cheng-hang, CHENG Le-ming, LUO Zhong-yang, WANG Qin-hui,
SHI Zheng-lun, CEN Ke-fa
Institute for Thermal Power Engineering, State Key Laboratory of Clean Energy Utilization,
Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

循环流化床锅炉中二次风主要提供燃烧所需氧气并控制NOx生成,但是随着炉膛的大型化发展二次风作用减弱.采用Fluent6.2计算软件数值研究300 MW循环流化床锅炉炉膛中二次风速度和风向对炉内颗粒速度和固体浓度的影响,分析炉内不同位置的颗粒速度和浓度的分布以及二次风穿透性规律.模拟结果表明,裤衩型循环流化床内中间的颗粒存在向下流动性,颗粒浓度在Z向截面上呈现不均匀分布,其形状类似是多个环核结构模型的结合.二次风显著提高炉膛上部颗粒浓度,能够优化炉内气体和颗粒流场分布,外侧二次风的穿透性好于内侧二次风的穿透性.模拟结果可以为大型循环流化床锅炉的设计和运行提供理论参考.
Abstract:

Secondary air plays very important role in combustion for oxygen supplement and NOx control in a circulation fluidized bed (CFB) furnace. However the distribution of secondary air in the furnace becomes worse as the furnace is enlarged. Numerical simulation was performed to study the impacts of secondary air in the furnace of a pantleg 300 MW CFB boiler. The flow fields of solids velocity and concentration were computed at different secondary air injecting velocity and direction using Fluent6.2. The distributions of solids velocity and concentration were given and analyzed at different location and crosssection in the furnace. The penetrability of secondary air was also analyzed. The simulation shows that the solids flow goes down in the middle of the furnace, and the distribution of solids concentration in the Z crosssection is uneven, which is similar to a combination of several coreannular flows. The solids concentration in the top of furnace is higher with the one. The secondary air can optimize the gas and solids flow fields in the furnace. The penetration of outboard secondary air injection is better than that of the inboard one. The simulation results can be referenced in the design and operation for a large CFB boiler.
出版日期: 2010-05-14
:  TK224  
基金资助:

国家科技支撑计划子课题资助项目（2006BAA03B02-08）
通讯作者: 程乐鸣，男，教授，博导.     E-mail: lemingc@zju.edu.cn
作者简介: 郑成航（1984—），男，浙江衢州人，博士生，从事能源清洁燃烧理论与技术研究. E-mail: zhengch2003@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

郑成航, 程乐鸣, 骆仲泱, 王勤辉, 施正伦, 岑可法. 裤衩型300 MW循环流化床炉膛二次风数值模拟[J]. J4, 2010, 44(4): 743-749.

ZHENG Cheng-Hang, CHENG Le-Ming, JIA Zhong-Yang, WANG Qi-Hui, SHI Zheng-Lun, CEN Ge-Fa. Numerical simulation of the impact of secondary air for a pantleg
300 MW circulation fluidized bed boiler. J4, 2010, 44(4): 743-749.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.04.021    或    http://www.zjujournals.com/eng/CN/Y2010/V44/I4/743

［1］  U.S. Clean Coal Technology Demonstration Program. The JEA largescale CFB combustion demonstration project ［R］. Pittsburgh: U.S. Department of Energy and JEA, 2003.
［2］ VENLINEN I, PSIK R. 460MWe supercritical CFB boiler design for agisza power plant ［R］. Barcelona: POWERGEN Europe, 2004.
［3］ 刘静,王勤辉,骆仲泱,等.600MWe超临界循环流化床锅炉的设计研究［J］.动力工程,2003,23(1): 21792185.
LIU Jing, WANG Qinhui, LUO Zhongyang, et al. Design and research on a 600MWe supercritical circulating fluidized bed boiler ［J］. Power Engineering, 2003, 23(1): 21792185.
［4］ 吕俊复,岳光溪,张建胜,等.超临界循环流化床锅炉的可行性［J］.锅炉制造,2002，8(4): 15.
LV Junfu, YUE Guangxi, ZHANG Jiansheng, et al. Feasibility of the supercritical pressure CFB boiler ［J］. Boiler Manufacturing, 2002,8(4): 15.
［5］ 张彦军,李振宇.国产首台300MW循环流化床锅炉设计和运行实践［J］.锅炉制造,2006,12(4): 1013.
ZHANG Yanjun, LI Zhenyu. Design and operation experience of domestic first 300MW CFB boiler ［J］. Boiler Manufacturing, 2006, 12(4): 1013.
［6］ 程乐鸣,骆仲泱,高翔,等.循环流化床锅炉炉膛开口设计讨论［J］.电站系统工程,1998,14(1): 913.
CHENG Leming, LUO Zhongyang, GAO Xiang, et al. Design on furnace openings in a circulating fluidized bed boiler ［J］. Power System Engineering, 1998, 14(1): 913.
［7］ ERSOY L E, GOLRIZ M R, KOKSAL M, et al. Circulating fluidized bed hydrodynamics with air staging: an experimental study ［J］. Powder Technology, 2004, 145(1): 2533.
［8］ KIM J H, SHAKOURZADEH K. Analysis and modelling of solid flow in a closed loop circulating fluidized bed with secondary air injection ［J］. Powder Technology, 2000, 111(3): 179185.
［9］ ARASTOOPOUR H. Numerical simulation and experimental analysis of gas/solid flow systems ［J］. Powder Technology, 2001, 119(2/3): 5967.
［10］ FARIBORZ T, NAOKO E, CLAYTON W. Experimental and computational study of gassolid fluidized bed hydrodynamics ［J］. Chemical Engineering Science, 2005, 60(24): 6857 6867.
［11］ CRUZ E, STEWARD F R, PUGSLEY T. New closure models for CFD modeling of highdensity circulating fluidized beds ［J］. Powder Technology, 2006, 169(3): 115122.
［12］ 岑可法,倪明江,骆仲泱,等.循环流化床锅炉的理论设计与运行［M］.北京：中国电力出版社,1997： 124127.
［13］ ZHANG W N, JOHNSSON F, BO L. Fluiddynamic boundary layers in CFB boilers ［J］. Chemical Engineering Science, 1995, 50(2): 201210.
［14］ GAYAN P, DIEGO L F, ADANEZ J. Radial gas mixing in a circulating fluidized bed ［J］. Powder Technology, 1997, 94(2): 163171.
［15］ 刘佳,陈继辉,卢啸风,等.循环流化床锅炉二次风射流特性的冷模实验研究［J］.电站系统工程,2007,23(3): 2831.
LIU Jia, CHEN Jihui, LU Xiaofeng, et al. Cold model experiments on the characteristic of secondary air injection in CFB boiler ［J］. Power System Engineering, 2007, 23(3): 2831.
［16］ 侯祥松,杨海瑞,吕俊复,等.循环流化床中气体扩散规律的研究［J］.锅炉技术,2004,35(5): 1620.
HOU Xiangsong, YANG Hairui, LU Junfu, et al. Gas diffusion behavior in circulating fluidized bed riser ［J］. Boiler Technology, 2004, 35(5): 1620.
[1] 斯东波, 周昊, 岑可法. 不同带粉量的三次风再燃试验与数值模拟[J]. J4, 2010, 44(3): 482-488.