Please wait a minute...
浙江大学学报(工学版)
J4  2009, Vol. 43 Issue (12): 2250-2253    DOI: 10.3785/j.issn.1008-973X.2009.12.021
工业工程与制造业信息化     
基于粗集理论的产品属性定制权重确定方法
武守飞,王正肖,潘晓弘,纪杨建
(浙江大学 现代制造工程研究所,浙江 杭州 310027)
Rough sets theory-based product attribute customization level determination method
WU Shou-fei, WANG Zheng-xiao, PAN Xiao-hong, JI Yang-jian
(Institute of Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China)
 全文: PDF(614 KB)   HTML
摘要：

针对大规模定制中产品属性定制权重的确定问题，提出了基于属性重要度和依赖度的产品属性定制权重确定方法.在该方法中，产品关键定制属性构成条件属性集，客户对样本定制产品的偏好构成决策属性集，属性值的不同组合构成样本定制产品，通过论域自身所隐含的知识来确定不同属性对客户定制的影响程度，可以有效提高权重计算的客观性.研究了产品属性定制权重计算过程，其由产品定制属性分析、定量属性的离散化、基于客户偏好调查的决策表构建、产品属性定制权重计算构成.以汽车座套为例对所提出的方法进行了实例分析，验证了方法的有效性.
Abstract:

An attribute significance and dependency based customization level decision method was proposed in order to solve the customization level decision problem in mass customization. The condition attribute set was composed of product’s key customization attributes, and the decision attribute set was composed of customer’s preference to the product. Different combinations of attribute’s value represented the samples of customization product. Product attribute customization level was calculated according to the implicit knowledge in the universe in order to improve the decision's objectivity. The process for the method consisted of analyzing the product’s key attributes and their possible values, discretizing the key attribute’s value, constructing the customization degree decision table by customer investigation, and calculating the attribute customization level. An example of car seat customization level decision shows that the method is effective.
出版日期: 2010-01-16
:  TB 472  
基金资助:

国家“863”高技术研究发展技术资助项目(2009AA04Z146); 国家科技支撑计划资助项目（2006BAF01A02）.
通讯作者: 王正肖,男,副教授.     E-mail: wangzhengxiao@zju.edu.cn
作者简介: 武守飞(1982-),男,河南台前人,博士生,主要从事制造业信息化、大批量定制、设计重用等研究.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

武守飞, 王正肖, 潘晓弘, 等. 基于粗集理论的产品属性定制权重确定方法[J]. J4, 2009, 43(12): 2250-2253.

WU Shou-Fei, WANG Zheng-Xiao, BO Xiao-Hong, et al. Rough sets theory-based product attribute customization level determination method. J4, 2009, 43(12): 2250-2253.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2009.12.021    或    http://www.zjujournals.com/eng/CN/Y2009/V43/I12/2250


[1] PINE B J. Mass Customization: the new frontier in business competition
[M]. Boston: Harvard Business School Press, 1993.

[2] JIAO J X, TSENG M M. Customizability analysis in design for mass customization
[J]. Computer-Aided Design, 2004,36(8):745-757.

[3] DA S, BORENSTEIN D, FOGLIATTO F S. Mass customization: literature review and research discussion
[J]. Production Economics, 2001, 72(1):1-13.

[4] 周乐,连海佳,季建华. 大规模定制模式产品定制程度分析
[J].系统管理学报,2007,16(6):685-689.
ZHOU Le, LIAN Hai-jia, JI Jian-hua. An analysis of customized level on mass customization
[J]. Journal of Systems & Management, 2007,16(6):685-689.

[5] 伊辉勇,刘伟,徐哲. 基于联合分析模型的产品定制问题研究
[J]. 计算机集成制造系统, 2007,13 (7):1322-1329.
YI Hui-yong, LIU Wei, XU Zhe. Problem of customization level based conjoint analysis model
[J]. Computer Integrated Manufacturing Systems, 2007, 13(7): 1322-1329.

[6] PAWLAK Z, GRAZYMALA B J, SLOWINSKI R, et al. Rough sets
[J]. Communications of ACM, 1995,38 (11):89-95.

[7] 张文修,吴伟志,梁吉业,等. 粗糙集理论与方法
[M]. 北京:科学出版社,2001.

[8] 贡智兵,李东波,潘洋宇. 粗集理论在快速设计中的应用研究
[J]. 计算机集成制造系统,2006,12 (8):1198-1202.
GONG Zhi-bing, LI Dong-bo, PAN Yang-yu. Application of rough sets theory in rapid design
[J]. Computer Integrated Manufacturing Systems, 2006,12(8):1198-1202.

[9]王国胤. Rough集理论与知识获取
[M].西安:西安交通大学出版社,2001.

[10]姬振豫.正交设计的方法与理论
[M].香港:世界科技出版社,2001.
[1] 刘征, 鲁娜, 吴剑锋. 基于设计认知的草图研究综述[J]. J4, 2010, 44(12): 2376-2382.