We investigate the bandwidth allocation and power control schemes in orthogonal frequency division multiplexing (OFDM) based multi-hop cognitive radio networks, and the color-sensitive graph coloring (CSGC) model is viewed as an efficient solution to the spectrum assignment problem. We extend the model by taking into account the power control strategy to avoid interference among secondary users and adapt dynamic topology. We formulate the optimization problem encompassing the channel allocation, power control with the interference constrained below a tolerable limit. The optimization objective with two different optimization strategies focuses on the routes rather than the links as in traditional approaches. A heuristic solution to this nondeterministic polynomial (NP)-hard problem is presented, which performs iterative channel allocation according to the lowest transmission power that guarantees the link connection and makes channel reuse as much as possible, and then the transmission power of each link is maximized to improve the channel capacity by gradually adding power level from the lowest transmission power until all co-channel links cannot satisfy the interference constraints. Numerical results show that our proposed strategies outperform the existing spectrum assignment algorithms in the performance of both the total network bandwidth and minimum route bandwidth of all routes, meanwhile, saving the transmission power.

This paper presents a robust lossless data hiding scheme. The original cover image can be recovered without any distortion after data extraction if the stego-image remains intact, and conversely, the hidden data can still be extracted correctly if the stego-image goes through JPEG compression to some extent. A cover image is divided into a number of non-overlapping blocks, and the arithmetic difference of each block is calculated. By shifting the arithmetic difference value, we can embed bits into the blocks. The shift quantity and shifting rule are fixed for all blocks, and reversibility is achieved. Furthermore, because the bit-0- and bit-1-zones are separated and the particularity of the arithmetic differences, minor changes applied to the stego-image generated by non-malicious attacks such as JPEG compression will not cause the bit-0- and bit-1-zones to overlap, and robustness is achieved. The new embedding mechanism can enhance embedding capacity and the addition of a threshold can make the algorithm more robust. Experimental results showed that, compared with previous schemes, the performance of the proposed scheme is significantly improved.

In this paper, a novel Bayesian-Gaussian neural network (BGNN) is proposed and applied to on-line modeling of a hydraulic turbine system (HTS). The new BGNN takes account of the complex nonlinear characteristics of HTS. Two redefined training procedures of the BGNN include the off-line training of the threshold matrix parameters, optimized by swarm optimization algorithms, and the on-line BGNN predictive application driven by the sliding window data method. The characteristics models of an HTS are identified using the new BGNN method and simulation results are presented which show the effectiveness of the BGNN in addressing modeling problems of HTS.

We present an algorithm for image compression based on an image inpainting method. First the image regions that can be accurately recovered are located. Then, to reduce the data, information of such regions is removed. The remaining data besides essential details for recovering the removed regions are encoded to produce output data. At the decoder, an inpainting method is applied to retrieve removed regions using information extracted at the encoder. The image inpainting technique utilizes partial differential equations (PDEs) for recovering information. It is designed to achieve high performance in terms of image compression criteria. This algorithm was examined for various images. A high compression ratio of 1:40 was achieved at an acceptable quality. Experimental results showed attainable visible quality improvement at a high compression ratio compared with JPEG.

The widespread availability of portable computing power and inexpensive digital cameras are opening up new possibilities for retailers in some markets. One example is in optical shops, where a number of systems exist that facilitate eyeglasses selection. These systems are now more necessary as the market is saturated with an increasingly complex array of lenses, frames, coatings, tints, photochromic and polarizing treatments, etc. Research challenges encompass Computer Vision, Multimedia and Human-Computer Interaction. Cost factors are also of importance for widespread product acceptance. This paper describes a low-cost system that allows the user to visualize different glasses models in live video. The user can also move the glasses to adjust its position on the face. The system, which runs at 9.5 frames/s on general-purpose hardware, has a homeostatic module that keeps image parameters controlled. This is achieved by using a camera with motorized zoom, iris, white balance, etc. This feature can be specially useful in environments with changing illumination and shadows, like in an optical shop. The system also includes a face and eye detection module and a glasses management module.

Software reverse engineering techniques are applied most often to reconstruct the architecture of a program with respect to quality constraints, or non-functional requirements such as maintainability or reusability. In this paper, AOPR, a novel actor-oriented program reverse engineering approach, is proposed to reconstruct an object-oriented program architecture based on a high performance model such as an actor model. Reconstructing the program architecture based on this model results in the concurrent execution of the program invocations and consequently increases the overall performance of the program provided enough processors are available. The proposed reverse engineering approach applies a hill climbing clustering algorithm to find actors.

Carrier frequency offset (CFO) estimation is critical for orthogonal frequency-division multiplexing (OFDM) based transmissions. In this paper, we present a low-complexity, blind CFO estimator for OFDM systems with constant modulus (CM) signaling. Both single-input single-output (SISO) and multiple-input multiple-output (MIMO) systems are considered. Based on the assumption that the channel keeps constant during estimation, we prove that the CFO can be estimated uniquely and exactly through minimizing the power difference of received data on the same subcarriers between two consecutive OFDM symbols; thus, the identifiability problem is assured. Inspired by the sinusoid-like cost function, curve fitting is utilized to simplify our algorithm. Performance analysis reveals that the proposed estimator is asymptotically unbiased and the mean square error (MSE) exhibits no error floor. We show that this blind scheme can also be applied to a MIMO system. Numerical simulations show that the proposed estimator provides excellent performance compared with existing blind methods.

In this Exa byte scale era, data increases at an exponential rate. This is in turn generating a massive amount of metadata in the file system. Hadoop is the most widely used framework to deal with big data. Due to this growth of huge amount of metadata, however, the efficiency of Hadoop is questioned numerous times by many researchers. Therefore, it is essential to create an efficient and scalable metadata management for Hadoop. Hash-based mapping and subtree partitioning are suitable in distributed metadata management schemes. Subtree partitioning does not uniformly distribute workload among the metadata servers, and metadata needs to be migrated to keep the load roughly balanced. Hash-based mapping suffers from a constraint on the locality of metadata, though it uniformly distributes the load among NameNodes, which are the metadata servers of Hadoop. In this paper, we present a circular metadata management mechanism named dynamic circular metadata splitting (DCMS). DCMS preserves metadata locality using consistent hashing and locality-preserving hashing, keeps replicated metadata for excellent reliability, and dynamically distributes metadata among the NameNodes to keep load balancing. NameNode is a centralized heart of the Hadoop. Keeping the directory tree of all files, failure of which causes the single point of failure (SPOF). DCMS removes Hadoop’s SPOF and provides an efficient and scalable metadata management. The new framework is named ‘Dr. Hadoop’ after the name of the authors.

We propose a framework of hand articulation detection from a monocular depth image using curvature scale space (CSS) descriptors. We extract the hand contour from an input depth image, and obtain the fingertips and finger-valleys of the contour using the local extrema of a modified CSS map of the contour. Then we recover the undetected fingertips according to the local change of depths of points in the interior of the contour. Compared with traditional appearance-based approaches using either angle detectors or convex hull detectors, the modified CSS descriptor extracts the fingertips and finger-valleys more precisely since it is more robust to noisy or corrupted data; moreover, the local extrema of depths recover the fingertips of bending fingers well while traditional appearance-based approaches hardly work without matching models of hands. Experimental results show that our method captures the hand articulations more precisely compared with three state-of-the-art appearance-based approaches.

Inverted index traversal techniques have been studied in addressing the query processing performance challenges of web search engines, but still leave much room for improvement. In this paper, we focus on the inverted index traversal on document-sorted indexes and the optimization technique called dynamic pruning, which can efficiently reduce the hardware computational resources required. We propose another novel exhaustive index traversal scheme called largest scores first (LSF) retrieval, in which the candidates are first selected in the posting list of important query terms with the largest upper bound scores and then fully scored with the contribution of the remaining query terms. The scheme can effectively reduce the memory consumption of existing term-at-a-time (TAAT) and the candidate selection cost of existing document-at-a-time (DAAT) retrieval at the expense of revisiting the posting lists of the remaining query terms. Preliminary analysis and implementation show comparable performance between LSF and the two well-known baselines. To further reduce the number of postings that need to be revisited, we present efficient rank safe dynamic pruning techniques based on LSF, including two important optimizations called list omitting (LSF_LO) and partial scoring (LSF_PS) that make full use of query term importance. Finally, experimental results with the TREC GOV2 collection show that our new index traversal approaches reduce the query latency by almost 27% over the WAND baseline and produce slightly better results compared with the MaxScore baseline, while returning the same results as exhaustive evaluation.

This paper presents a velocity controller for the cutting system of a trench cutter (TC). The cutting velocity of a cutting system is affected by the unknown load characteristics of rock and soil. In addition, geological conditions vary with time. Due to the complex load characteristics of rock and soil, the cutting load torque of a cutter is related to the geological conditions and the feeding velocity of the cutter. Moreover, a cutter’s dynamic model is subjected to uncertainties with unknown effects on its function. In this study, to deal with the particular characteristics of a cutting system, a novel adaptive fuzzy integral sliding mode control (AFISMC) is designed for controlling cutting velocity. The model combines the robust characteristics of an integral sliding mode controller with the adaptive adjusting characteristics of an adaptive fuzzy controller. The AFISMC cutting velocity controller is synthesized using the backstepping technique. The stability of the whole system including the fuzzy inference system, integral sliding mode controller, and the cutting system is proven using the Lyapunov theory. Experiments have been conducted on a TC test bench with the AFISMC under different operating conditions. The experimental results demonstrate that the proposed AFISMC cutting velocity controller gives a superior and robust velocity tracking performance.

This paper presents a hardware efficient high definition television (HDTV) encoder for H.264/AVC. We use a two-level mode decision (MD) mechanism to reduce the complexity and maintain the performance, and design a sharable architecture for normal mode fractional motion estimation (NFME), special mode fractional motion estimation (SFME), and luma motion compensation (LMC), to decrease the hardware cost. Based on these technologies, we adopt a four-stage macro-block pipeline scheme using an efficient memory management strategy for the system, which greatly reduces on-chip memory and bandwidth requirements. The proposed encoder uses about 1126k gates with an average Bjontegaard-Delta peak signal-to-noise ratio (BD-PSNR) decrease of 0.5 dB, compared with JM15.0. It can fully satisfy the real-time video encoding for 1080p@30 frames/s of H.264/AVC high profile.

Congestion in wireless sensor networks (WSNs) not only causes severe information loss but also leads to excessive energy consumption. To address this problem, a novel scheme for congestion avoidance, detection and alleviation (CADA) in WSNs is proposed in this paper. By exploiting data characteristics, a small number of representative nodes are chosen from those in the event area as data sources, so that the source traffic can be suppressed proactively to avoid potential congestion. Once congestion occurs inevitably due to traffic mergence, it will be detected in a timely way by the hotspot node based on a combination of buffer occupancy and channel utilization. Congestion is then alleviated reactively by either dynamic traffic multiplexing or source rate regulation in accordance with the specific hotspot scenarios. Extensive simulation results under typical congestion scenarios are presented to illuminate the distinguished performance of the proposed scheme.

Automatic pectoral muscle removal on medio-lateral oblique (MLO) view of mammogram is an essential step for many mammographic processing algorithms. However, it is still a very difficult task since the sizes, the shapes and the intensity contrasts of pectoral muscles change greatly from one MLO view to another. In this paper, we propose a novel method based on a discrete time Markov chain (DTMC) and an active contour model to automatically detect the pectoral muscle boundary. DTMC is used to model two important characteristics of the pectoral muscle edge, i.e., continuity and uncertainty. After obtaining a rough boundary, an active contour model is applied to refine the detection results. The experimental results on images from the Digital Database for Screening Mammography (DDSM) showed that our method can overcome many limitations of existing algorithms. The false positive (FP) and false negative (FN) pixel percentages are less than 5% in 77.5% mammograms. The detection precision of 91% meets the clinical requirement.

We investigate a problem of object-oriented (OO) software quality estimation from a multi-instance (MI) perspective. In detail, each set of classes that have an inheritance relation, named ‘class hierarchy’, is regarded as a bag, while each class in the set is regarded as an instance. The learning task in this study is to estimate the label of unseen bags, i.e., the fault-proneness of untested class hierarchies. A fault-prone class hierarchy contains at least one fault-prone (negative) class, while a non-fault-prone (positive) one has no negative class. Based on the modification records (MRs) of the previous project releases and OO software metrics, the fault-proneness of an untested class hierarchy can be predicted. Several selected MI learning algorithms were evaluated on five datasets collected from an industrial software project. Among the MI learning algorithms investigated in the experiments, the kernel method using a dedicated MI-kernel was better than the others in accurately and correctly predicting the fault-proneness of the class hierarchies. In addition, when compared to a supervised support vector machine (SVM) algorithm, the MI-kernel method still had a competitive performance with much less cost.

We present an antenna-in-package system integrated with a meander line antenna based on low temperature co-fired ceramic (LTCC) technology. The proposed system employs a meander line patch antenna, a packaging layer, and a laminated multi-chip module (MCM) for integration of integrated circuit (IC) bare chips. A microstrip feed line is used to reduce the interaction between patch and package. To decrease electromagnetic coupling, a via hole structure is designed and analyzed. The meander line antenna achieved a bandwidth of 220 MHz with the center frequency at 2.4 GHz, a maximum gain of 2.2 dB, and a radiation efficiency about 90% over its operational frequency. The whole system, with a small size of 20.2 mm × 6.1 mm × 2.6 mm, can be easily realized by a standard LTCC process. This antenna-in-package system integrated with a meander line antenna was fabricated and the experimental results agreed with simulations well.

Many important developments in video compression technologies have occurred during the past two decades. The block-based discrete cosine transform with motion compensation hybrid coding scheme has been widely employed by most available video coding standards, notably the ITU-T H.26xand ISO/IEC MPEG-xfamilies and video part of China audio video coding standard (AVS). The objective of this paper is to provide a review of the developments of the four basic building blocks of hybrid coding scheme, namely predictive coding, transform coding, quantization and entropy coding, and give theoretical analyses and summaries of the technological advancements. We further analyze the development trends and perspectives of video compression, highlighting problems and research directions.

Vector graphic , as a kind of geometric representation of raster images, has many advantages, e.g., definition independence and editing facility. A popular way to convert raster images into vector graphics is {image meshing}, the aim of which is to find a mesh to represent an image as faithfully as possible. For traditional meshing algorithms, the crux of the problem resides mainly in the high non-linearity and non-smoothness of the objective, which makes it difficult to find a desirable optimal solution. To ameliorate this situation, we present a hierarchical optimization algorithm solving the problem from coarser levels to finer ones, providing initialization for each level with its coarser ascent. To further simplify the problem, the original non-convex problem is converted to a linear least squares one, and thus becomes convex, which makes the problem much easier to solve. A dictionary learning framework is used to combine geometry and topology elegantly. Then an alternating scheme is employed to solve both parts. Experiments show that our algorithm runs fast and achieves better results than existing ones for most images.

It is universally acknowledged by network security experts that proactive peer-to-peer (P2P) worms may soon engender serious threats to the Internet infrastructures. These latent threats stimulate activities of modeling and analysis of the proactive P2P worm propagation. Based on the classical two-factor model, in this paper, we propose a novel proactive worm propagation model in unstructured P2P networks (called the four-factor model) by considering four factors: (1) network topology, (2) countermeasures taken by Internet service providers (ISPs) and users, (3) configuration diversity of nodes in the P2P network, and (4) attack and defense strategies. Simulations and experiments show that proactive P2P worms can be slowed down by two ways: improvement of the configuration diversity of the P2P network and using powerful rules to reinforce the most connected nodes from being compromised. The four-factor model provides a better description and prediction of the proactive P2P worm propagation.

Recently, Sun et al. (2005) highlighted the essential property of perfect forward secrecy (PFS) for e-mail protocols when a higher security level is desirable. Furthermore, Sun et al. (2005)’s protocols take only a single e-mail server into account. Actually, it is much more common that the sender and the recipient register at different e-mail servers. Compared to existing protocols, the protocol proposed in this paper takes into account the scenario that the sender and the recipient register at different servers. The proposed protocol is skillfully designed to achieve PFS and end-to-end security as well as to satisfy the requirements of confidentiality, origin, integrity and easy key management. The comparison in terms of functionality and computational efficiency demonstrates the superiority of the present scheme.

Thin metal sheets are often located in the coupling paths of magnetic coupling energy transfer (MCET) systems. Eddy currents in the metals reduce the energy transfer efficiency and can even present safety risks. This paper describes the use of etched fractal patterns in the metals to suppress the eddy currents and improve the efficiency. Simulation and experimental results show that this approach is very effective. The fractal patterns should satisfy three features, namely, breaking the metal edge, etching in the high-intensity magnetic field region, and etching through the metal in the thickness direction. Different fractal patterns lead to different results. By altering the eddy current distribution, the fractal pattern slots reduce the eddy current losses when the metals show resistance effects and suppress the induced magnetic field in the metals when the metals show inductance effects. Fractal pattern slots in multilayer high conductivity metals (e.g., Cu) reduce the induced magnetic field intensity significantly. Furthermore, transfer power, transfer efficiency, receiving efficiency, and eddy current losses all increase with the increase of the number of etched layers. These results can benefit MCET by efficient energy transfer and safe use in metal shielded equipment.

This paper proposes an optimized simulated annealing (SA) algorithm for thinning and weighting large planar arrays in 3D underwater sonar imaging systems. The optimized algorithm has been developed for use in designing a 2D planar array (a rectangular grid with a circular boundary) with a fixed side-lobe peak and a fixed current taper ratio under a narrow-band excitation. Four extensions of the SA algorithm and the procedure for the optimized SA algorithm are described. Two examples of planar arrays are used to assess the efficiency of the optimized method. The proposed method achieves a similar beam pattern performance with fewer active transducers and faster convergence ability than previous SA algorithms.

The classical vector median filter (VMF) has been widely used to remove impulse noise from color images. However, since the VMF cannot identify thin lines during the denoising process, many thin lines may be removed out as noise. This serious problem can be solved by a newly proposed filter that uses a noise detector to find these thin lines and then keep them unchanged. In this new approach, the noise detection scheme applied on a current processed pixel is realized through counting the close pixels in its eight neighbor positions and the expanded window to see whether the current pixel is corrupted by impulse noise. Based on the previous outputs, our algorithm can increase the performance in detecting and canceling the impulse noise. Extensive experiments indicate that this approach can be used to remove the impulse noise from a color image without distorting the useful information.

With the spatial-temporal focusing of acoustic energy, time reversal processing (TRP) shows the potential application for active target detection in shallow water. To turn the ‘potential’ into a reality, the TRP based on a model source (MS) instead of a physical probe source (PS) is investigated. For uncertain ocean environments, the robustness of TRP is discussed for the narrowband and broadband signal respectively. The channel transfer function matrix is first constructed in the acoustic perturbation space. Then a steering vector for time reversal transmission is obtained by singular value decomposition (SVD) of the matrix. For verification of the robust TRP, the tank experiments of time reversal transmission focusing and its application for active target detection are undertaken. The experimental results have shown that the robust TRP can effectively detect and locate a small bottom target.

We studied the architecture of embedded computing systems from the viewpoint of power consumption in memory systems and used a selective-code-compression (SCC) approach to realize our design. Based on the LZW (Lempel-Ziv-Welch) compression algorithm, we propose a novel cost effective compression and decompression method. The goal of our study was to develop a new SCC approach with an extended decision policy based on the prediction of power consumption. Our decompression method had to be easily implemented in hardware and to collaborate with the embedded processor. The hardware implementation of our decompression engine uses the TSMC 0.18 μm-2p6m model and its cell-based libraries. To calculate power consumption more accurately, we used a static analysis method to estimate the power overhead of the decompression engine. We also used variable sized branch blocks and considered several features of very long instruction word (VLIW) processors for our compression, including the instruction level parallelism (ILP) technique and the scheduling of instructions. Our code-compression methods are not limited to VLIW machines, and can be applied to other kinds of reduced instruction set computer (RISC) architecture.

A low power high performance Delta-Sigma modulator for portable measurement applications is presented. To reduce power consumption while maintaining high performance, a fully feedforward architecture with a comprehensive system-level design is implemented. As a key building block, a novel power efficient current mirror operational transconductance amplifier (OTA) with a fast-settling less-error switched-capacitor common-mode feedback (SC CMFB) circuit is introduced, and the effects of both gain nonlinearity and 1/f noise of OTA are discussed. A new method to determine the voltage gain of an OTA is also proposed. The bottom terminal parasitic effect of poly-insulator-poly (PIP) capacitors is considered. About an extra 20% of capacitance is added to the total capacitance load. A power and area efficient resonator is adopted to realize a coefficient of 1/90 for 50% power and 75% area reduction compared with conventional designs. The chip is implemented in a low cost 0.35 μm complementary metal oxide semiconductor (CMOS) process. The total power consumption is 20 μW with a 1.5 V supply, and the measured dynamic range (DR) is 95 dB over a 1 kHz bandwidth. Experimental results show that a high figure-of-merit (FOM) is achieved for the designed modulator in comparison with those from the literature.

In this paper, we propose an image driven shape deformation approach for stylizing a 3D mesh using styles learned from existing 2D illustrations. Our approach models a 2D illustration as a planar mesh and represents the shape styles with four components: the object contour, the context curves, user-specified features and local shape details. After the correspondence between the input model and the 2D illustration is established, shape stylization is formulated as a style-constrained differential mesh editing problem. A distinguishing feature of our approach is that it allows users to directly transfer styles from hand-drawn 2D illustrations with individual perception and cognition, which are difficult to identify and create with 3D modeling and editing approaches. We present a sequence of challenging examples including unrealistic and exaggerated paintings to illustrate the effectiveness of our approach.

We propose a new biometric identity based encryption scheme (Bio-IBE), in which user biometric information is used to generate the public key with a fuzzy extractor. This is the first Bio-IBE scheme that achieves constant size ciphertext. This is also a scheme that is secure against the adaptive chosen ciphertext attack (CCA2). Details are presented along with a discussion of Shamir’s threshold secret sharing and fuzzy extraction of biometrics, which is based on error correction codes. We also define a security model and prove that the security of the proposed scheme is reduced to the decisional bilinear Diffie-Hellman (DBDH) assumption. The comparison shows that the proposed scheme has better efficiency and stronger security compared with the available Bio-IBE schemes.

Online monitoring of temporally-sequenced news streams for interesting patterns and trends has gained popularity in the last decade. In this paper, we study a particular news stream monitoring task: timely detection of bursty events which have happened recently and discovery of their evolutionary patterns along the timeline. Here, a news stream is represented as feature streams of tens of thousands of features (i.e., keyword. Each news story consists of a set of keywords.). A bursty event therefore is composed of a group of bursty features, which show bursty rises in frequency as the related event emerges. In this paper, we give a formal definition to the above problem and present a solution with the following steps: (1) applying an online multi-resolution burst detection method to identify bursty features with different bursty durations within a recent time period; (2) clustering bursty features to form bursty events and associating each event with a power value which reflects its bursty level; (3) applying an information retrieval method based on cosine similarity to discover the event’s evolution (i.e., highly related bursty events in history) along the timeline. We extensively evaluate the proposed methods on the Reuters Corpus Volume 1. Experimental results show that our methods can detect bursty events in a timely way and effectively discover their evolution. The power values used in our model not only measure event’s bursty level or relative importance well at a certain time point but also show relative strengths of events along the same evolution.

This paper is concerned with the routing protocol design for large-scale wireless sensor and actor networks (WSANs). The actor-sensor-actor communication (ASAC) strategy is first proposed to guarantee the reliability of persistent actor-actor communication. To keep network connectivity and prolong network lifetime, we propose a dynamic gradient-based routing protocol (DGR) to balance the energy consumption of the network. With the different communication ranges of sensors and actors, the DGR protocol uses a data load expansion strategy to significantly prolong the network lifetime. The balance coefficient and the routing re-establishment threshold are also introduced to make the tradeoff between network lifetime and routing efficiency. Simulation results show the effectiveness of the proposed DGR protocol for unbalanced and persistent data transmission.