Please wait a minute...
Chin J Eng Design  2022, Vol. 29 Issue (6): 776-783    DOI: 10.3785/j.issn.1006-754X.2022.00.080
Whole Machine and System Design     
Design of control system of airborne water exploration and drainage drilling rig of excavating and anchoring all-in-one machine
Shu-wei GU1,2(),Kai CHEN2,Ya-xin SONG2,Ming-sheng YU2,Zhi-xiang LIU3(),Kang ZOU3
1.Faculty of Electrical and Control Engineering, Liaoning Technical University, Huludao 125000, China
2.Lijiahao Coal Mine, Baotou Energy Co. , Ltd. of National Energy Group, Ordos 017000, China
3.Research Institute of Mineral Resources Development and Utilization Technology and Equipment, Liaoning Technical University, Fuxin 123000, China
Download: HTML     PDF(5590KB)
Export: BibTeX | EndNote (RIS)      

Abstract  

In order to solve the problem that the traditional tunnel drilling rig is not convenient for rapid installation and operation due to its huge volume when conducting the water exploration and drainage operation in the tunneling roadway, an airborne water exploration and drainage drilling rig of excavating and anchoring all-in-one machine was designed. This paper introduced the structure of the airborne water exploration and drainage drilling rig and the overall structure of its automatic electronic control system, designed the hardware of the control system, analyzed its work flow, and conducted industrial experiments in the factory and underground for the water exploration and drainage drilling rig. The experimental results verified the feasibility of the control system of the designed drilling rig. The developed water exploration and drainage drilling rig can significantly improve the efficiency of water exploration and drainage, and has a good application prospect.



Key wordsexcavating and anchoring all-in-one machine      airborne drilling rig      water exploration and drainage drilling rig      control system      monitoring system     
Received: 23 February 2022      Published: 06 January 2023
CLC:  TP 028.8  
Corresponding Authors: Zhi-xiang LIU     E-mail: 264012@qq.com;380357369@qq.com
Cite this article:

Shu-wei GU,Kai CHEN,Ya-xin SONG,Ming-sheng YU,Zhi-xiang LIU,Kang ZOU. Design of control system of airborne water exploration and drainage drilling rig of excavating and anchoring all-in-one machine. Chin J Eng Design, 2022, 29(6): 776-783.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn.1006-754X.2022.00.080     OR     https://www.zjujournals.com/gcsjxb/Y2022/V29/I6/776


掘锚一体机机载式探放水钻机控制系统的设计

为了解决传统坑道钻机在进行掘进巷道探放水作业时由于体积庞大而不便于快速安装和作业的问题,设计了一种掘锚一体机机载式探放水钻机。介绍了机载式探放水钻机的结构及其自动电控系统的总体架构,设计了控制系统的硬件,分析了其工作流程,进行了探放水钻机厂内和井下工业性实验,实验结果验证了所设计的探放水钻机控制系统的可行性。采用所研制的探放水钻机可以显著提高探放水作业效率,其具有良好的应用前景。


关键词: 掘锚一体机,  机载式钻机,  探放水钻机,  控制系统,  监控系统 
Fig.1 Schematic of installation position of water exploration and drainage drilling rig
Fig.2 Structure of water exploration and drainage drilling rig
Fig.3 General structure of automatic electric control system for water exploration and drainage drilling rig
序号监测量传感器类型型号量程
1一级伸缩油缸位移位移传感器1 200 mm
2二级伸缩油缸位移GUC1200B
3钻机进给油缸位移
4垂直旋转回转驱动所调节的整机倾角矿用本安型倾角传感器GUD90(A)-45°~45°
5水平回转驱动所调节的整机水平转角矿用本安型编码器BQH24
6支撑立柱下段油缸压力油压力传感器0~30 MPa
7支撑立柱上段油缸压力
8动力头旋转载荷GPD60
9动力头推进载荷
10系统总压力
11掘锚一体机倾角矿用本安型倾角传感器GUD90(A)-45°~45°
12掘锚一体机水平距离超声波测距传感器GUC66 000 mm
13设备振动加速度矿用本安型振动传感器GBC80(A)-80~80 m/s2
14掘锚一体机振动加速度
Table 1 Type and range of main monitoring sensors in the control system of water exploration and drainage drilling rig
序号功能型号流量/(L/min)
进油联STPSV55C2C/240-3200
第1联动力头旋转马达控制-42H100/100NN/EA2100
第2联动力头推进油缸控制
第3联俯仰姿态调整马达控制-32H80/80NN/EA280
第4联水平姿态调整马达控制
第5联一级伸缩油缸位移控制
第6联二级伸缩油缸位移控制
第7联支撑立柱旋转油缸控制
第8联支撑立柱油缸控制
尾联-E1-G24MA-10m
Table 2 Type and parameter of solenoid explosion-proof valve group
Fig.4 Wiring of main modules of PLC control system
Fig.5 Drilling operation process
Fig.6 Automatic recording process of drilling depth and drill pipe quantity
Fig.7 Handling process of sticking
Fig.8 Installation mode of external oil cylinder displacement sensor
Fig.9 Monitoring interface of airborne water exploration and drainage drilling rig of excavating and anchoring all-in-one machine
Fig.10 Field test results of airborne water exploration and drainage drilling rig of excavating and anchoring all-in-one machine
[1]   阚志涛,孙道明,魏军贤,等.双臂钻机在掘进工作面探放水钻孔施工中的应用[J].煤炭工程,2021,53(11):57-60.
KAN Zhi-tao, SUN Dao-ming, WEI Jun-xian, et al. Application of twin boom rig in water exploration and discharge drilling of heading face[J]. Coal Engineering, 2021, 53(11): 57-60.
[2]   阚志涛,邵俊杰,李旺年,等.双臂窄体分体式履带钻机研制[J].煤炭工程,2021,53(10):171-174.
KAN Zhi-tao, SHAO Jun-jie, LI Wang-nian, et al. Development of narrow-body split crawler drilling rig with twin boom[J]. Coal Engineering, 2021, 53(10): 171-174.
[3]   司金文.掘进巷道超前钻探设计应用[J].山西冶金,2021,44(3):114-116. doi:10.16525/j.cnki.cn14-1167/tf.2021.03.42
SI Jin-wen. Design and application of advanced drilling in the driving roadway[J]. Shanxi Metallurgy, 44(3): 114-116.
doi: 10.16525/j.cnki.cn14-1167/tf.2021.03.42
[4]   李栋.煤矿用探放水钻机及其关键技术[J].煤矿安全,2017,48(7):119-122. doi:10.13347/j.cnki.mkaq.2017.07.032
LI Dong. Mine-used water exploration and drainage drilling rigs and key technologies[J]. Safety in Coal Mines, 2017, 48(7): 119-122.
doi: 10.13347/j.cnki.mkaq.2017.07.032
[5]   李栋.ZDY3500T型煤矿用中深孔探放水钻机的研制[J].煤田地质与勘探,2017,45(3):151-155. doi:10.3969/j.issn.1001-1986.2017.03.028
LI Dong. Development of ZDY3500T drilling rig for water detection and drainage through medium-deep hole in coal mines[J]. Coal Geology & Exploration, 2017, 45(3): 151-155.
doi: 10.3969/j.issn.1001-1986.2017.03.028
[6]   梁春苗,汪芸.矿用浅孔探放水钻机的研制[J].煤矿安全,2015,46(3):88-89. doi:10.13347/j.cnki.mkaq.2015.03.025
LIANG Chun-miao, WANG Yun. Development of mine-used shallow hole water exploration and drainage drilling rig[J]. Safety in Coal Mines, 2015, 46(3): 88-89.
doi: 10.13347/j.cnki.mkaq.2015.03.025
[7]   李旺年. 掘锚一体机机载锚杆钻机的研制[J]. 煤矿安全,2021,52 (7):138-141. doi:10.13347/j.cnki.mkaq.2021.07.026
LI Wang-nian. Development of bolting machine on anchor excavator machine[J]. Safety in Coal Mines, 2021, 52(7): 138-141.
doi: 10.13347/j.cnki.mkaq.2021.07.026
[8]   张强.新型探放水钻机的应用研究[J].机械管理开发,2020,35(8):103-104.
ZHANG Qiang. Application of new drilling and discharge drilling rig[J]. Mechanical Management and Development, 2020, 35(8): 103-104.
[9]   党林.煤矿坑道双动力头钻机检测平台设计[J].煤矿机械,2020,41(8):20-21. doi:10.13436/j.mkjx.202008007
DANG Lin. Design of testing platform for double power head drilling rig in coal mine tunnel[J]. Coal Mine Machinery, 2020, 41(8): 20-21.
doi: 10.13436/j.mkjx.202008007
[10]   王伟男.煤矿探放水钻孔倾角定位的误差分析[J].煤炭科技,2019,40(4):37-39. doi:10.3969/j.issn.1008-3731.2019.04.012
WANG Wei-nan. Error analysis of dip angle location of water exploration and drainage boreholes in coal mine[J]. Coal Science & Technology Magazine, 2019, 40(4): 37-39.
doi: 10.3969/j.issn.1008-3731.2019.04.012
[11]   阚志涛.煤矿用双臂探放水钻机给进机构的设计[J].煤矿机械,2019,40(5):6-9. doi:10.13436/j.mkjx.201905003
KAN Zhi-tao. Design of feeding mechanism of drilling rig with twin boom for water exploration and drainage in coal mine[J]. Coal Mine Machinery, 2019, 40(5): 6-9.
doi: 10.13436/j.mkjx.201905003
[12]   阚志涛.ZDY2-1000LF型探放水钻机的研制及应用[J].煤炭工程,2019,51(4):143-146. doi:10.11799/ce201904031
KAN Zhi-tao. Development and application of ZDY2-1000LF drilling rig for water exploration and drainage[J]. Coal Engineering, 2019, 51(4): 143-146.
doi: 10.11799/ce201904031
[13]   张占强,李栋,孙保山,等.掘进机机载钻机机身设计与仿真分析[J].煤矿机械,2011,32(8):1-3. doi:10.3969/j.issn.1003-0794.2011.08.001
ZHANG Zhan-qiang, LI Dong, SUN Bao-shan, et al. Design and simulation analysis of feeding body of drilling digs machine[J]. Coal Mine Machinery, 2011, 32(8): 1-3.
doi: 10.3969/j.issn.1003-0794.2011.08.001
[14]   宋海涛,刘亦洋,姚亚峰,等.大角度多层孔履带式全液压坑道钻机的研制与应用[J].煤炭工程,2014,46 (12): 126-128. doi:10.11799/ce201412041
SONG Hai-tao, LIU Yi-yang, YAO Ya-feng, et al. Development and application of the track-mounted hydraulic tunnel drilling rig for wide-angle and multi-layer holes[J]. Coal Engineering, 2014, 46(12): 126-128.
doi: 10.11799/ce201412041
[15]   雷晓荣.“孔‒井‒地”一体化智能钻进系统及关键技术[J].煤炭科学技术,2020,48(7):274-281.
LEI Xiao-rong. “Hole-well-ground” integrated intelligent drilling system and key technologies[J]. Coal Science and Technology, 2020, 48(7): 274-281.
[16]   石智军,李泉新,姚克.煤矿井下智能化定向钻探发展路径与关键技术分析[J].煤炭学报,2020,45(6):2217-2224.
SHI Zhi-jun, LI Quan-xin, YAO Ke. Development path and key technology analysis of intelligent directional drilling in underground coal mine[J]. Journal of China Coal Society, 2020, 45(6): 2217-2224.
[17]   姚克,陈翔,方鹏,等. ZDY4300LK 井下自动钻机在大佛寺煤矿的试验研究[J].煤矿机械,2021,42(11):41-44.
YAO Ke, CHEN Xiang, FANG Peng, et al. Test and research on ZDY4300LK underground automatic drilling rig in Dafosi coal mine[J]. Coal Mine Machinery, 2021, 42(11): 41-44.
[18]   张始斋,王庆文. ZYWL-4000SY 型遥控钻机设计及关键技术研究[J].煤炭科学技术,2021,49(3):129-134.
ZHANG Shi-zhai, WANG Qing-wen. Design and key technology research of ZYWL-4000SY remote control drilling rig[J]. Coal Science and Technology, 2021, 49(3): 129-134.
[19]   董洪波,姚宁平,马斌,等.煤矿井下坑道钻机电控自动化技术研究[J].煤田地质与勘探,2020,48(3):219-224. doi:10.3969/j.issn.1001-1986.2020.03.031
DONG Hong-bo, YAO Ning-ping, MA Bin, et al. Research on electrically controlled automation technology of underground drill rig for coal mine[J]. Coal Geology & Exploration, 2020, 48(3): 219-224.
doi: 10.3969/j.issn.1001-1986.2020.03.031
[20]   罗明华,沈明,薛彦波.井下瓦斯抽采钻机远程控制系统的设计[J].工矿自动化,2011,37(8):14-16.
LUO Ming-hua, SHEN Ming, XUE Yan-bo. Design of remote control system of drill of gas extraction in coal mine underground[J]. Industrial and Mining Automation, 2011, 37(8): 14-16.
[1] Chao JI,Liang WANG,Xiao-jing WANG,Xiao-bing LI,Wen CAO. Design of cable tunnel fault warning system based on MSSA-SVM[J]. Chin J Eng Design, 2023, 30(1): 109-116.
[2] Xin-ping TAN,Lang GAN,Cheng-xu LIN,Xue-mei LI,Qian LI,Wang YAN,Gang CHEN,Guang-lan LIAO,Zhi-yong LIU. Design and implementation of fully automatic pathological staining control system based on STM32[J]. Chin J Eng Design, 2022, 29(4): 510-518.
[3] Chun-lin WANG,Chang LIU,Hua YANG,Hong QIN,Guo-zhu CHEN. System design and analysis of electricity-replace-oil driving device for oil and gas exploration[J]. Chin J Eng Design, 2022, 29(2): 220-230.
[4] ZHANG Ze, CHEN Yong, LI Guang-xin, LEI Yong-gan, RUAN Ou, WANG Zai-zhou. Design and structure optimization of electro-hydraulic control system assembly of electric vehicle transmission[J]. Chin J Eng Design, 2021, 28(3): 335-343.
[5] ZHENG Hua-lin, YANG Shun-bo, PAN Sheng-hu, WANG Chao. Research on control system of fixed length cutting and automatic layout for flap discs[J]. Chin J Eng Design, 2019, 26(4): 461-468.
[6] ZHENG Ying-jie, NIU Xing-hua, GAO Wei-guo, ZHANG Da-wei, LIU Teng. Study on design method and control strategy of differential temperature control system for precision machine tools[J]. Chin J Eng Design, 2018, 25(4): 472-480.
[7] CAO Guan, LU Guan, QIU Zi-xue, SUN Xiao-gang, XIA Yong-ping, ZHUANG Chao. Design of on-line monitoring and automatic elimination control system for residual torsion of steel cord[J]. Chin J Eng Design, 2018, 25(4): 481-487,494.
[8] WANG Li, ZHANG Shi-bing. Research on temperature control system of hot melt glue machine based on CPSO-BP neural network-PID[J]. Chin J Eng Design, 2017, 24(5): 588-594.
[9] XIE Miao, YAN Jiang-long, MAO Jun, LI Cui, LIU Yi-zhu. Analysis of intelligent stereo parking lot hydraulic control system[J]. Chin J Eng Design, 2017, 24(3): 337-342.
[10] ZHENG Tian-chi, GUO Lin-na, SUN Xiao-gang, QIU Zi-xue. Design of automatic preloading machine and its control system for capacitor cover plate[J]. Chin J Eng Design, 2017, 24(1): 108-114.
[11] ZHENG Tian-chi, SUN Xiao-gang, GUO Lin-na, SHAO Jian-xin, QIU Zi-xue. Design of automatic feeding and quantitative filling control system for capacitor aluminum shell[J]. Chin J Eng Design, 2016, 23(6): 620-625.
[12] ZHENG Tian-chi, SHAO Jian-xin, GUO Lin-na, SUN Xiao-gang, ZHANG Jun, QIU Zi-xue. Design of control system for core package pins puncture machine of aluminum electrolytic capacitor[J]. Chin J Eng Design, 2016, 23(4): 378-384.
[13] MAO Jun, YANG Zhen-hua, LU Jin-nan, XIE Miao. Supporting force control system design for transition process of stepping-type advanced supporting equipment[J]. Chin J Eng Design, 2015, 22(5): 387-393.
[14] HUANG Lei, LUO Zhen-jun, XU Wen-jing, WANG Xian, WANG Chao-yue. Design, simulation and control of one kind of climbing tower robot[J]. Chin J Eng Design, 2015, 22(5): 476-481.
[15] MAO Jun, YANG Zhen-hua, LU Jin-nan, XIE Miao. Supporting force control system design for transition process of stepping-type advanced supporting equipment[J]. Chin J Eng Design, 2015, 22(4): 387-393.