Please wait a minute...
Chinese Journal of Engineering Design  2016, Vol. 23 Issue (2): 130-135    DOI: 10.3785/j.issn.1006-754X.2016.02.005
    
Analysis of parallel system reliability model withtwo unitsbased on Phase-type distribution
YIN Dong-liang, LI Fang, CHEN Tong
Department of Management Science, Naval University of Engineering, Wuhan 430033, China
Download: HTML     PDF(579KB)
Export: BibTeX | EndNote (RIS)      

Abstract  In the modeling of system reliability, the lifetime and repair time of units are usually assumed to follow exponential distribution or other typical distributions.These models have many constraint conditions, and the applicability of models is not extensive.Therefore, Phase-type distribution was utilized to modeling, parallel repairable system consisting of two dissimilar units and a single repair facility in which the lifetime and repair time of units were assumed to obey different PH distributions was investigated.An analytic reliability model that was more appropriate to characterize the real situation was provided.Some important reliability features, such as the system stationary availability, mean time to first failure and stationary fault frequency, were obtained for certain.Finally, the validity and applicability of the model were verified by numerical applications.

Key wordsparallel system      reliability      Phase-type distribution     
Received: 29 September 2015      Published: 28 April 2016
CLC:  F253.4  
Cite this article:

YIN Dong-liang, LI Fang, CHEN Tong. Analysis of parallel system reliability model withtwo unitsbased on Phase-type distribution. Chinese Journal of Engineering Design, 2016, 23(2): 130-135.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn.1006-754X.2016.02.005     OR     https://www.zjujournals.com/gcsjxb/Y2016/V23/I2/130


基于PH分布的两部件并联系统可靠性模型分析

在系统可靠性建模过程中,通常假设部件寿命和维修时间等服从指数分布等典型分布,这样做会导致模型的约束条件过于严格,缩小了所研究模型的适用范围.采用Phase-type (PH)分布来构建模型,研究了包含2个不同部件的并联系统,考虑系统具有单一维修台,假设部件寿命和维修时间分别服从不同的PH分布,构建了描述能力更强的系统可靠性模型,得出了明确的系统稳态可用度、首次故障前平均工作时间、稳态故障频度等一系列相关可靠性参数的解析式.最后,通过算例分析证明了该方法的正确性和适用性.

关键词: 并联系统,  可靠性,  Phase-type分布 
[1] BAYRAMOGLU I.Reliability and mean residual life of complex systems with two dependent components per element[J].IEEE Transactions on Reliability,2013,62(1):276-285.

[2] LIU Y,LI X Z,DU Z P.Reliability analysis of a random fuzzy repairable parallel system with two non-identical components[J].Journal of Intelligent and Fuzzy Systems,2014,27(6):2775-2784.

[3] 曹晋华,程侃.可靠性数学引论[M].北京:高等教育出版社,2006:222-224. CAO Jing-hua,CHEN Kan.An introduction to mathematical of reliability[M].Beijing:Higher Education Press,2006:222-224.

[4] RAKESH G,SWATI K,MADHU M.A two dissimilar unit parallel system with two phase repair by skilled and ordinary repairmen[J].International Journal of System Assurance Engineering and Management,2014,5(4):554-561.

[5] RAM K,DIVYA J.Classical and Bayesian analysis of reliability characteristics of a two-unit parallel system with Weibull failure and repair laws[J].International Journal of System Assurance Engineering and Management,2014,5(3):252-261.

[6] ERLANG A K.Solution of some problems in the theory of probabilities of significance in automatic telephone exchanges[J].The Post Office Electrical Engineers Journal,1917,1(10):189-197.

[7] EDWARD K.An introduction to stochastic processes[M].Beijing:China Machine Press,2006:264-273.

[8] NEUTS M F,MEIER K S.On the use of phase type distributions in reliability modelling of systems with two components[J].OR Spektrum,1981,2(2):227-234.

[9] GRURUAJAN M,SRINIVASAN B.A complex two-unit system with random breakdown of repair facility[J].Microelectronics Reliability,1995,35(2):299-302.

[10] 赵丹.寿命及修理时间服从Phase-Type分布的可修系统的可靠性分析[D].河北:燕山大学理学院,2012:23-31. ZHAO Dan.Reliability analysis of repairable system with Phase-Type life or phase type repairs[D].Hebei:The University of Yanshan,Science Faculty,2012:23-31.

[11] MONTORO-CAZORLA D,PEREZOCON R.A deteriorating two-system with two repair modes and sojourn times Phase-Type distributed[J].Reliability Engineering & System Safety,2006,91:1-9.

[12] OSOGAMI T,HARCHOL M.Closed form solutions for mapping general distributions to quasi minimal PH distributions[J].Performance Evaluation,2006,63(6):524-552.

[13] QI M H.Fundamentals of matrix-analytic methods[M].London:Springer,2013:10-22.

[14] YONIT B,ESTHER F,BENNY L.Analysis of R out of N systems with several repairmen and exponential life times and phase type repair times[J].European Journal of Operational Research,2006,169:202-225.

[15] 董兵.具有指数分布、PH分布型修理两部件系统的可靠性研究[D].四川:电子科技大学数学科学学院,2007:4-6. DONG Bing.Study of repairable system with two units based on exponential distribution and PH distribution[D].Sichuan:University of Electronic Science and Technology of China,School of Mathematical Sciences,2007:4-6.
[1] CHEN Zhen, LI Tao, XUE Xiao-wei, ZHOU Yang, JING Shuang, CHEN Yan. Fatigue reliability analysis and optimization of vibroseis vibrator baseplate based on fuzzy comprehensive evaluation method[J]. Chinese Journal of Engineering Design, 2021, 28(4): 415-425.
[2] WANG Ai-lun, LIU Le, LIU Qing-ya. Research on strength reliability of pull rod combined rotor based on Kriging surrogate model[J]. Chinese Journal of Engineering Design, 2019, 26(4): 433-440.
[3] CUI Guo-hua, CUI Kang-kang, WU Hai-miao, ZHANG Yan-wei, LIU Jian. Reliability analysis for pressing force of prestressed concrete cylinder pipe port grinding robot[J]. Chinese Journal of Engineering Design, 2018, 25(6): 647-654.
[4] XIE Jing-wei, LI Fang, CHEN Tong, YIN Dong-liang. Analysis of cold standby system reliability model considering use and repair priority[J]. Chinese Journal of Engineering Design, 2018, 25(3): 315-320.
[5] WEN Rui-qiao, YANG Meng-ou, LIU Tao, ZHANG Jun-fu. Time-dependent kinematic reliability analysis of robot manipulators[J]. Chinese Journal of Engineering Design, 2018, 25(1): 50-55.
[6] LU Feng-yi, ZHAO Ke-yuan, XU Ge-ning, QI Qi-song. Reliability assessment of small sample based on multiple source information fusion and fuzzy fault tree[J]. Chinese Journal of Engineering Design, 2017, 24(6): 609-617.
[7] ZHANG Gen-bao, XU Fu-wei, RAN Yan, ZHANG Xiao-gang. Research on similarity evaluation and reliability prediction of mechanical structure[J]. Chinese Journal of Engineering Design, 2017, 24(3): 264-272.
[8] CHEN Wen-hua, DU Sheng-li, YANG Fan, PAN Jun, QIAN Ping. Unlocking reliability analysis of the ball locking mechanism for separating electrical connector[J]. Chinese Journal of Engineering Design, 2017, 24(3): 280-285.
[9] CHEN Wen-hua, ZHENG Chao-peng, LI Qi-zhi, PAN Jun, HE Qing-chuan, PAN Xiao-dong. Gear reliability analysis of 2.5 MW wind turbine gearboxbased on Copula function[J]. Chinese Journal of Engineering Design, 2015, 22(5): 425-430.
[10] YANG Chao, DI Peng, CHEN Tong. Fuzzy reliability allocation method for warship armaments based on interval analysis[J]. Chinese Journal of Engineering Design, 2015, 22(5): 317-323.
[11] YANG Chao, DI Peng, CHEN Tong. Fuzzy reliability allocation method for warship armaments based on interval analysis[J]. Chinese Journal of Engineering Design, 2015, 22(4): 317-323.
[12] XU Cheng-bin,PAN Jun,CHEN Wen-hua,HE Qing-chuan,ZHANG Li-bin,LIANG Jun. Finite element thermal analysis and plugging test of the high temperature electrical connector[J]. Chinese Journal of Engineering Design, 2015, 22(3): 250-255.
[13] WU Jiang. Parameter estimation method of mixed Weibull distribution in reliability analysis of aircraft[J]. Chinese Journal of Engineering Design, 2015, 22(1): 26-29.
[14] ZOU Xiao-yu, ZHU Tao, XIAO Shou-ne. Design of combination lock based on remote control and three-dimensional movement[J]. Chinese Journal of Engineering Design, 2014, 21(5): 476-480.
[15] ZHANG Yi-min, Lv Hao . An analytical methodology of reliability and sensitivity analysis for mechanical components considering the times of load action[J]. Chinese Journal of Engineering Design, 2014, 21(2): 119-123.