Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2004, Vol. 11 Issue (2): 93-95    DOI:
    
Design of electronic jacquard detector system
 DIAO  Hong-Quan, HU  Wei-Xiong, YAN  Gang-Feng
College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
Download: HTML     PDF(0KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Domestic Electronic jacquard has gained a big market for its low price and excellent performance.  Electronic jacquard detector, which can test the quality of jacquard, is a must during the jacquard producing. It can improve the quality and competence, reduce the cost and maintenance work. A kind of detector is designed to test the jacquard with needle numbers of 1152/1344/2688 and it has been put into use and gained a good effect.

Key words：  electronic jacquard      detector      system design      hardware design      software design     
Published: 28 April 2004
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
DIAO Hong-Quan
HU Wei-Xiong
YAN Gang-Feng
Cite this article:

DIAO Hong-Quan, HU Wei-Xiong, YAN Gang-Feng. Design of electronic jacquard detector system. Chinese Journal of Engineering Design, 2004, 11(2): 93-95.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2004/V11/I2/93


电子提花龙头检测器系统设计

 国产电子提花龙头以其低廉的价格、优异的性能，赢得了广阔的市场。电子提花龙头检测器作为电子提花龙头质量检测手段，在生产电子提花龙头的过程中是必需的，能够提高电子提花龙头产品的质量、减少此产品的后续维护、降低电子提花龙头成本和提升产品的竞争力。设计了一种能够用于检测针数为1152/1344/2688电子提花龙头的检测器，并且应用于生产中，取得了良好的效果。

关键词： 电子提花龙头（电子提花机）,  检测器,  系统设计,  硬件设计,  软件设计 
[1] Baicun WANG,Kailing ZHU,Jinsong BAO,Feng WANG,Haibo XIE,Huayong YANG. Intelligent design and scheduling optimization of painted body storage based on digital pedestal system[J]. Chinese Journal of Engineering Design, 2023, 30(4): 399-408.
[2] Zheng LI,Xiao-rui LUO,Bo XIE,Xin CAO,He-xu SUN. Design of solar intelligent tracking system based on light intensity perception[J]. Chinese Journal of Engineering Design, 2022, 29(5): 627-633.
[3] FU Min, LI Chen-xi, ZHENG Zhao-qi. Design and analysis of semi-automatic screw type pineapple picking-collecting machine[J]. Chinese Journal of Engineering Design, 2020, 27(4): 487-497.
[4] SUN Lun-ye, FU Zhi-bo, WANG Long. Design and test of control system for compound feed electrochemical machine tool[J]. Chinese Journal of Engineering Design, 2019, 26(3): 338-345.
[5] QIAN Jin-yuan, JIN Zhi-jiang. Obstacle contained system (OCS) design method and its application in valve core orifice design of pilot-control globe valve[J]. Chinese Journal of Engineering Design, 2017, 24(5): 496-502,517.
[6] LIU Yong, XU Ai-Qiang, MENG Shang. Implementation of negative selection algorithm matching rules on FPGA[J]. Chinese Journal of Engineering Design, 2010, 17(6): 464-468.
[7] WANG Wen-Lin. Software design of flexible developing system for automatic ceramic
powder storing and continuous proportional weighing[J]. Chinese Journal of Engineering Design, 2006, 13(6): 387-391.
[8] YAN Gang-Feng, WANG Chen-Luan. Design of embedded control system in computerized flat knitter based on ARM[J]. Chinese Journal of Engineering Design, 2006, 13(2): 104-107.
[9] DIAO Hong-Quan, YAN Gang-Feng. Design of soft start energy-saving controller of asynchronous motor[J]. Chinese Journal of Engineering Design, 2004, 11(3): 155-157.
[10] SHOU Zhao-Yu, OU-Yang Ning , HAN Chuan-Jiu. Approach to multi-detectors netting[J]. Chinese Journal of Engineering Design, 2004, 11(2): 85-88.
[11] DIAO Hong-Quan, HU Wei-Xiong, YAN Gang-Feng. Design of five-phase hybrid stepping motor reformatived river based on MCU[J]. Chinese Journal of Engineering Design, 2004, 11(1): 19-22.
[12] DIAO Hong-Quan, ZHANG Yao-Yao, YAN Gang-Feng. Application of MCU interface with floppy disk driver in computerised embroidery machine[J]. Chinese Journal of Engineering Design, 2003, 10(6): 337-340.
[13] QIU Lin-Jin, QIU Qing-Ying, HE Bin. Research on knowledge m odeling and its organizational strategy of complex transmitting system[J]. Chinese Journal of Engineering Design, 2002, 9(5): 251-256.
[14] JIANG Xiao-Yong, XIANG Zhan-Qin, LIANG Jian-Xin. Research and Development of Hot Steel Rolling Printer[J]. Chinese Journal of Engineering Design, 2001, 8(4): 191-194.
[15] ZHU Bin, LIU Jian-Ye. Design of Sight-stabling Action Control Sytem of Helicopter9-2  [J]. Chinese Journal of Engineering Design, 2001, 8(2): 93-95.