Please wait a minute...
Chinese Journal of Engineering Design  2010, Vol. 17 Issue (6): 430-434    DOI:
    
Transmission assembly planning study based on SLP and Em-plant
 XIAO Chao1,2, CHEN  Shu-Hong2
1. Graduate School of the Chinese Academy of Sciences, Beijing 100049, China; 2. Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
Download: HTML     PDF(1427KB)
Export: BibTeX | EndNote (RIS)      

Abstract   Automotive transmission assembly line was the object of study. The purpose was to illustrate that the use of SLP theory and Em-plant simulation in transmission assembly line planning could short the design cycle, improve the design quality. SLP theory and Em-plant simulation software were simply described, and then the relationship between them in product line planning and design process was analyzed. The authors took Great Wall automotive transmission assembly line as a design example to elaborate the design process of SLP theory and Em-plant simulation. Firstly the authors introduced the design process of the main assembly line layout and external logistics channel physical planning with SLP theory. And then the authors used the Em-plant simulation software to test and verify the planning assembly line, through which the authors could further balance the stations. The results showed that the assembly line layout and logistics channels are reasonable, and the balance between the stations is high. The conclusion is that the combination of SLP theory and Em-0plant simulation software in automotive transmission assembly line layout design is reasonable. It could satisfy the requirements of the logistics and the balance of the assembly line. And this can effectively improve the level of our production line design.

Key wordsSLP planning      Em-plant simulation      transmission      assembly line     
Published: 28 December 2010
Cite this article:

XIAO Chao, CHEN Shu-Hong. Transmission assembly planning study based on SLP and Em-plant. Chinese Journal of Engineering Design, 2010, 17(6): 430-434.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2010/V17/I6/430


基于SLP和Em-plant的变速器装配线规划研究

以汽车变速器装配线为研究对象,用SLP理论和Em-plant仿真相结合的方法进行变速器装配线规划,以缩短设计周期,提高设计质量.以长城汽车变速器装配线的设计规划过程为例,首先用SLP理论对装配线的主线体以及外围物流通道进行规划,然后用Em-plant仿真软件对规划的线体进行仿真验证,进一步平衡各工位.结果显示装配线的线体布置和物流通道合理,工位之间的平衡性高.由此可以得出,用SLP理论和Em-plant仿真相结合的方法进行变速器装备线的设计规划,条理性强,能够兼顾线体物流和平衡性两方面的要求,能够提高我国变速器装配线的设计水平.

关键词: SLP规划,  Em-plant仿真,  变速器,  装配线 
[1] Ji-peng JIA,Li-bin ZANG,Yong CHEN,Xiao-zhe LIN,Jie CHEN,Yi-min WU. Study on the influence of support stiffness and tooth surface coating on the meshing characteristics of helical gear pair[J]. Chinese Journal of Engineering Design, 2023, 30(1): 48-56.
[2] Jiang LIU,Zheng-ming XIAO,Long-long ZHANG,Wei-biao LIU. Transmission accuracy reliability analysis and parameter optimization of RV reducer considering cycloid gear wear[J]. Chinese Journal of Engineering Design, 2022, 29(6): 739-747.
[3] CHEN Long-hu, HAN Dong, ZHANG Wen-hui, YE Jun-jie, ZHANG Jing-hui, MA Zhi-yu. Design and performance study of acoustic attenuation structure of perforated tube coupled with metamaterial film[J]. Chinese Journal of Engineering Design, 2021, 28(4): 521-526.
[4] ZHANG Lu, YANG Shu-jun, LI Xue-liang, HAN Bin, PANG Yu. Research on kinematic characteristics of two-stage hydro-mechanical continuously variable transmission mechanism[J]. Chinese Journal of Engineering Design, 2021, 28(3): 268-277.
[5] ZHANG Ze, CHEN Yong, LI Guang-xin, LEI Yong-gan, RUAN Ou, WANG Zai-zhou. Design and structure optimization of electro-hydraulic control system assembly of electric vehicle transmission[J]. Chinese Journal of Engineering Design, 2021, 28(3): 335-343.
[6] ZHOU Chao, WANG Yang, RUI Xiao-ming. Finite element analysis and experimental study on wind-induced swing of 500 kV transmission line jumper wire[J]. Chinese Journal of Engineering Design, 2020, 27(6): 713-719.
[7] LI Song-mei, QIU Shi-kai. Average transmission efficiency analysis of tripod universal joint[J]. Chinese Journal of Engineering Design, 2019, 26(4): 379-384.
[8] QIAO Jing-hui, LI Ling. Research on TV backboard detection and adaptive capture based on machine vision[J]. Chinese Journal of Engineering Design, 2019, 26(4): 452-460.
[9] SONG Jian-hu. Vibration analysis of a data transmission antenna on high orbit satellite[J]. Chinese Journal of Engineering Design, 2019, 26(3): 274-279.
[10] WANG Zhe, CHEN Yong, CAO Zhan, LI Guang-xin, ZUO Kou-cheng. Research on vibration and noise reduction of two-speed transmission of pure electric vehicle[J]. Chinese Journal of Engineering Design, 2019, 26(3): 280-286.
[11] HE Jian-hai, ZHOU Ming-de, BAO Jian-rong. Design and implementation of software and hardware of the mine WiFi video transmission system[J]. Chinese Journal of Engineering Design, 2016, 23(6): 626-632.
[12] HU Yun, LIN Teng-jiao, ZHAO Jun, LÜ He-sheng. Meshing performance analysis and gear modification optimization of the helical gear pair of vertical mill gearbox[J]. Chinese Journal of Engineering Design, 2016, 23(3): 276-281,287.
[13] ZHOU Jin-chao, LIU Zi-jian, PI Hao-jie, LIU Zi-yun. Research on shift strategy of AMT vehicle based on engine torque and speed control[J]. Chinese Journal of Engineering Design, 2015, 22(2): 185-192.
[14] ZHU Mao-tao, SHEN Deng-feng, LIANG Yan-chun, WANG Dong-ping, ZHANG Tong. Control strategy design of hydraulic system for series-parallel hybrid transmission[J]. Chinese Journal of Engineering Design, 2014, 21(5): 469-475.
[15] DAI Jun-liang, WANG Wen-ge. Research on transmission delay between slaves of EtherCAT network control[J]. Chinese Journal of Engineering Design, 2014, 21(5): 494-498.