Please wait a minute...
Chinese Journal of Engineering Design  2019, Vol. 26 Issue (3): 274-279    DOI: 10.3785/j.issn.1006-754X.2019.03.005
Optimization Design     
Vibration analysis of a data transmission antenna on high orbit satellite
SONG Jian-hu
The 54th Research Institute of China Electronics Technology Group Corporation, Shijiazhuang 050081, China
Download: HTML     PDF(2256KB)
Export: BibTeX | EndNote (RIS)      

Abstract  

In order to ensure the safety of antenna system at launch moment and orbit stage, the vibration property of a data transmission antenna developed to work on lunar orbit satellite was analysed. Through the finite element modeling and simulation method,the vibration performance of the antenna on high orbit satellite at launch moment and orbit stage was analysed and calculated, and the system antenna structure was optimized according to the simulation results. The vibration test for antenna system was applied in actual vibration environment, and the results indicated that the antenna system structure was reliable. The electrical property was tested again after vibration test, and the result indicated that the antenna electrical property was stable. The result of vibration test confirmed the reliability of the antenna and the credibility of the finite element analysis. This antenna has been launched and worked on orbit with stable performance indexes and good work conditions. This study can prefer some reference to increase the vibration safety for the related satellite antenna.



Key wordsdata transmission antenna      lunar orbit      finite element analysis      vibration test     
Received: 26 September 2018      Published: 28 June 2019
CLC:  TH 113.1  
Cite this article:

SONG Jian-hu. Vibration analysis of a data transmission antenna on high orbit satellite. Chinese Journal of Engineering Design, 2019, 26(3): 274-279.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn.1006-754X.2019.03.005     OR     https://www.zjujournals.com/gcsjxb/Y2019/V26/I3/274


某高轨星载数传天线的振动分析

为了确保天线系统在发射阶段和入轨工作阶段的安全,对研制的某月球轨道小型星载数传天线进行了振动分析。通过有限元建模仿真方法对该高轨星载天线在发射阶段和入轨工作阶段的振动性能进行了分析和计算,并以此为根据对天线系统结构进行优化设计。进而,通过振动试验对天线系统进行了真实振动环境条件下的测试,结果表明天线系统结构安全。振动试验后对天线电气性能进行了复测,测试结果表明其电气性能稳定,由此验证了天线系统的可靠性和有限元分析的可信性。目前,该数传天线已随星发射并入轨运行,其各项性能指标稳定,工作状态良好。研究结果对提高相关星载天线的振动安全性具有一定的参考作用。


关键词: 数传天线,  月球轨道,  有限元分析,  振动试验 

1 ZENGBin. Structure design of spacecraft electronic equipment[J]. Electro-Mechanical Engineering, 2008, 24(5): 5-7.
2 ZENGPan. Finite element analysis and applications[M]. Beijing: Tsinghua University Press, 2004: 1-492.
3 WANGMin, WANGXiao-jing. Simulation analysis in random vibration of missile-borne antenna[J]. Guidance & Fuze, 2007, 28(2): 57-60.
4 WANGDan-dan, WANGYong, ZHENGXue-xiao, et al. Research on the equivalent calculation method for the effect of random vibration on the gain of slotted waveguide array antenna[J]. Chinese Journal of Engineering Design, 2017, 24(4): 365-372.
5 LINChang-lu, NIEZai-ping. Antenna engineering manual[M]. Beijing: Publishing House of Electronics Industry, 2002: 1-1252.
6 SONGL, DUANB, ZHENGF, et al. Performance of planar slotted waveguide arrays with surface distortion[J]. IEEE Transaction on Antenna & Propagation, 2011, 59(9): 3218-3223. doi:10.1109/tap.2011.2161537
7 ZHUShi-jian. Vibration theory and vibration isolation[M]. Beijing: National Defense Industry Press, 2006: 67-98.
8 HUANGBen-cheng, You-liMA . Space environment test technology of spacecraft[M]. Beijing: National Defense Industry Press, 2002: 1-268.
9 WANGMei-yan, LIChang, HUFeng. Structural design of lightweight radar antenna[J]. Machinery & Electronics, 2018, 36(1): 18-21.
10 DYSKINA V, ESTEINY, KANEL-BELOWA J, et al. A new principle in design of composites materials: reinforcement by interlocked element[J]. Composites Science and Technology, 2003, 63(3/4): 483-491. doi: 10.1016/S0266-3538(02)00228-2
11 HUANGBen-cheng, TONGJing-yu. Space environment engineering[M]. Beijing: China Science and Technology Press, 2010: 1-679.
12 YEYun-shang. Space-vehicle antenna[M]. Beijing: China Science and Technology Press, 2007: 1-1007.
13 LITao, YIZhong, GAOHong. Summarization space environmental worthiness evaluation technology for spacecraft material[J]. Equipment Environmental Engineering, 2012, 9(3): 37-40.
14 Qi-fengLÜ , ZHANGWei-hong, ZHANGQiao, et al. Layout design optimization of component structure with random vibration response[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(9): 1769-1775.
15 ZHANGXiao-dong, LIJun, XUEMing-de. Thermal and mechanical analysis of composite laminated structures[J]. Journal of Tsinghua University (Science and Technology), 2006, 46(5): 745-748.
16 YUJian-zu. Thermal design and analysis techniques of electronic equipment[M]. Beijing: Beihang University Press, 2000: 25-26.
17 XIANGShu-hong. The test technology of spacecraft mechanics environment[M]. Beijing: China Science and Technology Press, 2010: 1-274.
18 FENGWei-quan. Evaluation and validation of space environmental applicability of spacecraft materials[J]. Spacecraft Environment Engineering, 2010, 27(2): 139-143.
19 HUHong-fen, BAIXiao-hong. Application and development of multi-beam antenna[J]. Modern Radar, 2002, 24(4): 69-75.

[1] CHEN Hong-yue, ZHANG Zhan-li, LU Zhang-quan. Design and performance study of cylindrical arm coil spring for linear compressor[J]. Chinese Journal of Engineering Design, 2021, 28(4): 504-510.
[2] WANG Cheng-jun, LI Shuai. Design and bending performance analysis of three-joint soft actuator[J]. Chinese Journal of Engineering Design, 2021, 28(2): 227-234.
[3] ZHOU Chao, QIN Rui-jiang, RUI Xiao-ming. Analysis of mechanical properties of V-shaped insulator string under wind load[J]. Chinese Journal of Engineering Design, 2021, 28(1): 95-104.
[4] HUANG Wei, XU Jian, LU Xin-zheng, HU Ming-yi, LIAO Wen-jie. Research on dynamic vibration absorption for power equipment and building floor[J]. Chinese Journal of Engineering Design, 2021, 28(1): 25-32.
[5] ZHOU Chao, WANG Yang, RUI Xiao-ming. Finite element analysis and experimental study on wind-induced swing of 500 kV transmission line jumper wire[J]. Chinese Journal of Engineering Design, 2020, 27(6): 713-719.
[6] LI Cheng-bing, LEI Peng. Stress analysis and weak roof performance evaluation for 5 000 m3vertical dome storage tank[J]. Chinese Journal of Engineering Design, 2020, 27(2): 182-190.
[7] LIU Zhao, YOU Hong-xin, SUN Liang, YANG Yu-ling, LIU Hua-qing. Design of suspended hydraulic transmission rotary detection platform for large spherical tank[J]. Chinese Journal of Engineering Design, 2019, 26(3): 267-273.
[8] GAO Zhi-lai, QIU Zi-xue, REN Dong, CUI De-you, XU Xin-peng. Structure design and optimization for crossbeam of bridge gantry milling machine[J]. Chinese Journal of Engineering Design, 2019, 26(1): 56-64.
[9] LUO Yan-yan, WU Xiong-wei, TIAN Ya-chao, YU Chang-chao. Study on the contact performance of electric connector under impact environment[J]. Chinese Journal of Engineering Design, 2018, 25(1): 110-117.
[10] ZHANG Qiang, WU Ze-guang, WU Ze-yang, WANG Hai-jian. Research on online testing and analysis of guide foot force of shearer[J]. Chinese Journal of Engineering Design, 2017, 24(6): 694-701,716.
[11] CHENG Ming, CHEN Zhao-bo, KIM Kyongsol, JIAO Ying-hou. Design and analysis of MR damper with multistage serpentine magnetic circuit[J]. Chinese Journal of Engineering Design, 2017, 24(3): 350-358.
[12] LIU Fan, QIN Na, NIU Jian-di, ZHENG Liang. Finite element simulation and experimental research on rotary ultrasonic grinding of titanium alloy[J]. Chinese Journal of Engineering Design, 2017, 24(2): 162-167.
[13] LUO Yan-yan, YANG Jing-yu, LIU Xin-wei, LI Xiao-ning. Numerical analysis and experimental verification on stress field of electrical connector contact[J]. Chinese Journal of Engineering Design, 2016, 23(6): 564-570.
[14] LIU Kai, CAO Yi, ZHOU Rui, DING Rui, GE Shu-yi. Modeling and analysis of compressive inside LET flexure hinge[J]. Chinese Journal of Engineering Design, 2016, 23(6): 585-591.
[15] ZHAO Hong-qiang, ZHOU Mao-xian, CHEN Qing, FU Si-long. The mechanical analysis for the platform of down-the-hole drill sustained by one outrigger[J]. Chinese Journal of Engineering Design, 2016, 23(4): 345-351,363.