Please wait a minute...
Chinese Journal of Engineering Design  2013, Vol. 20 Issue (5): 434-440    DOI:
    
Research on adaptive fuzzy neural network control of four-wheel steering system
 HU  Qi-Guo1, REN  Long1,2
1.School of Electromechanics and Automobile Engineering, Chongqing Jiaotong University, Chongqing 400074,China; 
2.Dongfeng Cummins Engine Co., Ltd., Xiangyang 441000, China
Download: HTML     PDF(2542KB)
Export: BibTeX | EndNote (RIS)      

Abstract  In order to achieve the multi degree of freedom and nonlinear movement of the vehicle, three degrees of freedom and fourwheel steering model was built up under Simulink environment. For most control methods need to rely on the defect that the controlled object should be an accurate mathematical model, we put up the fuzzy neural network which is selfassociated, selflearning, selfrecognition and adaptive for fourwheel steering control strategy. With rotor angle of front wheel and speed of the vehicle as input, the rotor angle of rear wheel as the output, we built the simulation model for the training. Hybrid method was used to acquire the sample selfadaptive fuzzy neural network controller, and compared the controller with that which is obtained under the feedback control of the front wheel steering, proportional control and yawing angular velocity. Results show that the selfadaptive fuzzy neural network control makes the vehicle mass center sideslip angle tend to zero when the speed is from low to high, and it has strong robustness. In anglestep, linemovement experiments, the control effect is better than that of the front wheel steering and proportional control and yawing angular velocity feedback control, it greatly improves the control performance of the vehicle.

Key wordsvehicle      four-wheel-steering      fuzzy-neural network control      simulation analysis     
Published: 28 October 2013
Cite this article:

HU Qi-Guo, REN Long. Research on adaptive fuzzy neural network control of four-wheel steering system. Chinese Journal of Engineering Design, 2013, 20(5): 434-440.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2013/V20/I5/434


汽车四轮转向自适应模糊神经网络控制研究

为了实现现实车辆运动的多自由度和非线性,在Simulink环境下建立包含车辆侧倾运动和轮胎非线性的三自由度四轮转向模型,针对大多控制方法需要依赖被控对象为精确数学模型的缺陷,提出具有联想、自学习、自识别、自适应特性的自适应模糊神经网络四轮转向控制策略;通过以前轮转角及车速作为输入,并依此确定后轮转角的输出,建立获得训练样本的仿真实验模型,用混合法训练得到自适应模糊神经网络控制器,并分别与前轮转向、比例控制和横摆角速度反馈控制下的四轮转向控制器进行仿真比较分析.结果表明自适应模糊神经网络控制使车辆在低速到中、高速时质心侧偏角趋于零,具有较强的鲁棒性;在角阶跃、移线实验中,控制效果优于前轮转向、比例控制和横摆角速度反馈控制,较大地改善了车辆的操纵性能.

关键词: 汽车,  四轮转向,  模糊-神经网络控制,  仿真分析 
[1] Shao-yu TANG,Jie WU,Hui ZHANG,Bing-bing DENG,Yu-ming HUANG,Hao HUANG. Simulation and experimental research on temperature field of multipole magnetorheological clutch[J]. Chinese Journal of Engineering Design, 2022, 29(4): 484-492.
[2] Wei GAO,Wei ZHANG,Hai-tao GU,Ling-shuai MENG,Hao GAO,Zhi-chao ZHAO. Analysis of motion characteristics of large deep-sea AUV unpowered spiral diving[J]. Chinese Journal of Engineering Design, 2022, 29(3): 370-383.
[3] FAN Xiao-yue, LIU Qi, GUAN Wei, ZHU Yun, CHEN Su-lin, SHEN Bin. Simulation and experimental research on thermal effect of electromagnetic micro hammer peening mechanism[J]. Chinese Journal of Engineering Design, 2022, 29(1): 66-73.
[4] ZHANG Qin, PANG Ye-zhong, WANG Kai. Simulation analysis and experimental research on robot pedaling weeding process[J]. Chinese Journal of Engineering Design, 2021, 28(6): 709-719.
[5] ZHANG Shen-tong. Analysis of landing load of aircraft landing gear based on virtual prototype technology[J]. Chinese Journal of Engineering Design, 2021, 28(6): 758-763.
[6] CHEN Zhen, XIONG Tao, YANG Yan-qing, XUE Xiao-wei. Sealing performance analysis and structure optimization of sealing ring of soluble ball seat[J]. Chinese Journal of Engineering Design, 2021, 28(6): 720-728.
[7] YU Ru-fei, KOU Xin, CHEN Wei. Simulation analysis of novel surface texture based on CFD[J]. Chinese Journal of Engineering Design, 2021, 28(4): 466-472.
[8] DING Shu-yong, ZHANG Zheng, DING Wen-jie, LIN Yong. Optimization design of multi-lane stereo garage and research on vehicle access strategy[J]. Chinese Journal of Engineering Design, 2021, 28(4): 443-449.
[9] ZHANG Ze, CHEN Yong, LI Guang-xin, LEI Yong-gan, RUAN Ou, WANG Zai-zhou. Design and structure optimization of electro-hydraulic control system assembly of electric vehicle transmission[J]. Chinese Journal of Engineering Design, 2021, 28(3): 335-343.
[10] HUANG Wei, LIU Wei-yi, LIU Zhi-en, LU Chi-hua. Structure optimization of experimental target vehicle chassis based on multi-objective genetic algorithm[J]. Chinese Journal of Engineering Design, 2021, 28(1): 80-88.
[11] ZHANG Chao, HAN Xiao-ming, LI Qiang, LI Chi. Design and dynamic characteristics analysis of permanent magnet eddy current shock absorber under impact load[J]. Chinese Journal of Engineering Design, 2020, 27(6): 786-794.
[12] WANG Yan, LIU Jing-yu, LI Guang, ZHANG Jia-bo, LIU Xing, ZHOU Xin-xin. Design of navigation control system of AGV based on IGPS and Mecanum wheel[J]. Chinese Journal of Engineering Design, 2020, 27(5): 662-670.
[13] CAO Peng-yong, WANG Jian-wen. Research on structure and control system of intelligent vehicle based on STM8S105[J]. Chinese Journal of Engineering Design, 2020, 27(4): 516-523.
[14] WANG Yu-pu, CHENG Wen-ming, DU Run, WANG Shu-biao, YANG Xing-zhou, ZHAI Shou-cai. Simulation analysis of wind load response for large gantry crane[J]. Chinese Journal of Engineering Design, 2020, 27(2): 239-246.
[15] ZHENG Ming-jun, YANG She, WU Wen-jiang, ZHAO Chen-lei. Parameter optimization of sand throwing plate of railway sand cleaning vehicle[J]. Chinese Journal of Engineering Design, 2020, 27(1): 87-93.