Please wait a minute...
Chinese Journal of Engineering Design  2013, Vol. 20 Issue (3): 212-217    DOI:
    
Study on the nonlinear influence of hysteresis characteristics of electromagnet in maglev movement
 WANG  Wen-Zhu1, JIN  Feng2, ZHOU  Hai-Bo1
1.State Key Laboratory of High Performance and Complex Manufacturing, Central South University, Changsha 410083, China; 
2. Northeast Branch of China Power Investment Corporation, Shenyang 110179, China
Download: HTML     PDF(881KB)
Export: BibTeX | EndNote (RIS)      

Abstract  During the controlling of the ultraprecision maglev movement, the hysteresis existed in the iron core and the armature guide is an important reason of making it hard to control precisely. It is significant to study the law of the hysteresis characteristics nonlinear influence on the electromagnetic force and build its nonlinear model. Through studying the hysteresis characteristics influence on the airgap magnetic flux density in the maglev precision movement and analyzing the hysteresis modeling theory of the magnetic circuit with an air gap, the nonlinear electromagnetic force model including the JilesAtherton model was established and then its parameters were tested by the particle swarm optimization. Results show that the electromagnet hysteresis in the maglev precision movement should not be neglected. The airgap magnetic flux density calculated by the identified new model is more precise and closer to the measured value than that calculated by the traditional model. These results provide an important reference for improving control precision of the maglev precision movement.

Key wordsmaglev precision movement      particle swarm optimization      JilesAtherton model      parameter identification     
Published: 28 June 2013
Cite this article:

WANG Wen-Zhu, JIN Feng, ZHOU Hai-Bo. Study on the nonlinear influence of hysteresis characteristics of electromagnet in maglev movement. Chinese Journal of Engineering Design, 2013, 20(3): 212-217.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2013/V20/I3/212


磁悬浮运动中电磁铁磁滞特性的非线性影响研究

超精密磁悬浮运动控制中,电磁铁铁心及衔铁导轨中存在的磁滞特性是导致电磁力难以实现精确控制的重要原因之一.研究磁滞特性对电磁力的非线性影响规律并建立其非线性模型具有重要意义.通过研究磁悬浮精密运动中电磁铁磁滞特性对气隙处磁感应强度的影响,分析了带气隙磁路磁滞特性建模原理,建立了包含JilesAtherton模型的电磁铁磁浮力非线性模型,并采用粒子群优化算法对该模型参数进行实验验证.结果表明,磁悬浮精密运动中电磁铁磁滞特性不容忽视,采用经参数辨识得到的新模型比采用传统模型计算得到的气隙磁感应强度值更精确、更接近实测值.研究结果为提高磁悬浮精密运动中电磁力的精确控制提供了重要参考价值.

关键词: 磁悬浮精密运动,  粒子群优化算法,  Jiles Atherton 模型,  参数辨识 
[1] Zhi-qiang NING,Li-xin WEI,Long QUAN,Mei-qing ZHAO,You-shan GAO. Anti-interference control and parallel tuning method for variable displacement asymmetric axial piston pump[J]. Chinese Journal of Engineering Design, 2022, 29(4): 401-409.
[2] LIANG Dong, LIANG Zheng-yu, CHANG Bo-yan, QI Yang, XU Zhen-yu. Optimal design of assisting-riveting parallel robot for lifting arm of dobby loom[J]. Chinese Journal of Engineering Design, 2022, 29(1): 28-40.
[3] XIAO Zhen, HE Yan, LI Yu-feng, WU Peng-cheng, LIU De-gao, DU Jiang. Application of improved MDSMOTE and PSO-SVM in classification prediction of automobile combination instrument[J]. Chinese Journal of Engineering Design, 2022, 29(1): 20-27.
[4] HUANG Wei, XU Jian, LU Xin-zheng, HU Ming-yi, LIAO Wen-jie. Research on dynamic vibration absorption for power equipment and building floor[J]. Chinese Journal of Engineering Design, 2021, 28(1): 25-32.
[5] SUN Yue-hai, TANG Er-xing. Optimal design of basic parameters of spiral bevel gears[J]. Chinese Journal of Engineering Design, 2020, 27(5): 616-624.
[6] HU Jun-ping, PENG Yao-ming. Optimization of hinge point position of auger driller luffing mechanism based on PSO algorithm[J]. Chinese Journal of Engineering Design, 2018, 25(5): 561-566,596.
[7] LÜ Hong-ming, QIAN Kun-cai. Identification method of normal contact stiffness between disc and pad of floating caliper disc brake based on modal frequency characterisitcs[J]. Chinese Journal of Engineering Design, 2018, 25(4): 388-393.
[8] BAI Xian-xu, CHENG Wei, XU Shi-xu, QIAN Li-jun. Research on 4-degree-of-freedom dynamics model of seated human: lumped-parameter model and its application to ride comfort research for automobiles[J]. Chinese Journal of Engineering Design, 2017, 24(6): 638-647.
[9] WANG Li, ZHANG Shi-bing. Research on temperature control system of hot melt glue machine based on CPSO-BP neural network-PID[J]. Chinese Journal of Engineering Design, 2017, 24(5): 588-594.
[10] ZHAO Dong-bo, YAO Ling-ling, YUAN Kun-kun, LU Jin-gui. Multi-objective optimization for four-bar mechanism of hydraulic support based on particle swarm optimization algorithm[J]. Chinese Journal of Engineering Design, 2017, 24(4): 433-439.
[11] LIANG Song, ZHANG Yi-min, HU Peng. Optimization design of H-type relieving cam based on PMOPSO method[J]. Chinese Journal of Engineering Design, 2017, 24(2): 232-240.
[12] WANG Hui, ZHU Long-biao, ZHU Tian-cheng, CHEN Hong-yan, SHAO Xiao-jiang, ZHU Zhi-hui. Research on path planning of parking system based on PSO-genetic hybrid algorithm[J]. Chinese Journal of Engineering Design, 2016, 23(2): 195-200.
[13] HUANG Xiao-qian, WANG Feng, TAN Yang-hong, WANG Rui, SHAO Jing-ke, CHEN Chun. Coordinated scheduling of electric vehicles and renewable generation considering vehicle-to-grid mode[J]. Chinese Journal of Engineering Design, 2016, 23(1): 67-73.
[14] . Multi-objective optimization software development and application[J]. Chinese Journal of Engineering Design, 2015, 22(3): 262-268.
[15] CHEN Bao,CHEN Qian,Christian Lohse,LEI Gang. Test verification and mechanical property estimation for rubber bushing of suspension based on "double methods-multiple equations"[J]. Chinese Journal of Engineering Design, 2014, 21(1): 43-50.