Please wait a minute...
Chinese Journal of Engineering Design  2009, Vol. 16 Issue (1): 70-74    DOI:
    
Theoretic study on power design theory of hay baler
 ZHAO  Hong-Gang1, MENG  Qing-Hua2, YANG  Zhu-Jun3
1. College of Traffic and Construction Engineering, Beihua University,  Jilin 132013, China;  
2. Department of Education Science,  Tianjin University of Sport, Tianjin  300381, China; 
3.Liaoyuan Vocational Technology Institute, Liaoyuan  136201, China
Download: HTML     PDF(1884KB)
Export: BibTeX | EndNote (RIS)      

Abstract  A new theoretical model on pasture compression is proposed to reduce hay baler energy consumption and seek the optimum ratio of property & price by combining field experiment on self-developed hay balers. The idea of unidirectional compressing and multi-directional change was presented and its basic properties by reference to visco-elastics qulities in adopting rheology were theoretically deduced. The hay compressing process was divided into 5 phrases, and some practical phenomena during this process were explained. It was concluded that the optimal length of compressing room was 2 m or so. When compression reaches 8 times, the maximal pressure was 0.8 MPa and bundle ties consumption reduces about one third. This paper provides theoretic basis for design of compressing equipments for agricultural fibre material.

Key words hay baler      design theory      viscoelastic     
Published: 28 February 2009
Cite this article:

ZHAO Hong-Gang, MENG Qing-Hua, YANG Zhu-Jun. Theoretic study on power design theory of hay baler. Chinese Journal of Engineering Design, 2009, 16(1): 70-74.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2009/V16/I1/70


饲草压捆机动力设计理论研究

为降低饲草压捆机的能耗,寻找最佳性价比,结合自行研制的饲草压捆机的现场试验,提出一种新的有关稻草压缩的理论模型,提出了单方向压缩、多方向变化的理念,对其主要借鉴流变学理论中黏弹性体的基本性质进行理论推导.将稻草在压缩过程中的变化划分为5个阶段,解释了稻草在压缩过程中的一些实际现象.指出开式压缩中压缩仓长度接近2 m比较合适,在压实程度大约为8倍时,峰值压强约为0.8 MPa,减少捆绳消耗约1/3,为今后农牧业纤维物料压缩设备的动力设计提供了一定的理论依据.

关键词: 饲草压捆机,  设计理论,  黏弹性体 
[1] YAO Tao, DUAN Guo-Lin, CAI Jin, ZHANG Jia-E. Influence of slots and filling viscoelastic materials on vibration of circular saw[J]. Chinese Journal of Engineering Design, 2010, 17(5): 355-359.
[2] ZHOU Chao, WU Qing-Ming, ZHANG Qiang, LI Yong. Nonlinear vibration analysis of viscoelastic isolator[J]. Chinese Journal of Engineering Design, 2009, 16(3): 205-209.
[3] LI Shu-Huan. Design of micro-feeding tool holder used in turning machining[J]. Chinese Journal of Engineering Design, 2006, 13(6): 410-415.