Please wait a minute...
Chinese Journal of Engineering Design  2007, Vol. 14 Issue (6): 486-489    DOI:
    
Application of PLC on control system of deep purification of drinking water
 MA  Qiao-Hong1, LI  Qian1, WANG  Meng-Xiao1, LIU  Qing-Li2
1.College of Electrical and Information Engineering, Shaanxi University of Science and Technology, Xianyang 712081, China;
2. College of Mechanical and Electrical Engineering, Shaanxi University ofScience and Technology, Xianyang 712081, China
Download: HTML     PDF(353KB)
Export: BibTeX | EndNote (RIS)      

Abstract  According to the systematic process, characteristics and control requirements of water treatment process were analyzed. The configuration of softwareand hardware of the control system were properly conducted by adopting SiemensS7-200 PLC. With the powerful logical control ability and numerous inner timers, the application of PLC realized time control of water filtering, forward-washing and back-washing, and complicated chain control of pumps, motors and valves, by which the control system is guaranteed to perform safely and smoothly and a good effect is achieved in practice.

Key wordsPLC      advanced treatment      filter      timer      drinking water     
Published: 28 December 2007
Cite this article:

MA Qiao-Hong, LI Qian, WANG Meng-Xiao, LIU Qing-Li. Application of PLC on control system of deep purification of drinking water. Chinese Journal of Engineering Design, 2007, 14(6): 486-489.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2007/V14/I6/486


PLC在饮用水深度净化控制系统中的应用

根据系统工艺,分析饮用水处理过程的特点和对控制系统的要求,采用西门子S7-200 PLC对控制系统的软硬件进行合理配置,利用PLC强大的逻辑控制功能和较多的内部时钟,实现控制系统的净水过滤和正反冲洗定时时间,各加压泵、反冲洗电机及众多阀门间复杂的联锁控制,保证了控制系统的安全可靠运行,并在运行中取得良好效果。

关键词: 可编程控制器,  深度处理,  过滤器,  定时器,  饮用水 
[1] Chun-lin WANG,Chang LIU,Hua YANG,Hong QIN,Guo-zhu CHEN. System design and analysis of electricity-replace-oil driving device for oil and gas exploration[J]. Chinese Journal of Engineering Design, 2022, 29(2): 220-230.
[2] ZHENG Hua-lin, FENG Yi-fu, PAN Sheng-hu. Design of weak magnetic signal acquisition system for metal pipeline based on STM32[J]. Chinese Journal of Engineering Design, 2021, 28(5): 646-653.
[3] ZHENG Yu-chen, JU Feng, WANG Dan, SUN Jing-bin, WANG Ya-ming, CHEN Bai. Design and control research of aeroengine blade detection robot[J]. Chinese Journal of Engineering Design, 2021, 28(5): 625-632.
[4] ZHANG Dang-dang, HU Jian-hong, KE Hai-sen, LIANG Ming-xuan. Design of bearing end face detection and sorting device based on color recognition[J]. Chinese Journal of Engineering Design, 2021, 28(4): 489-494.
[5] CUI Ya-jun, GUO An-fu, JIANG Tao, LI Jun-jie, LI Yong-xin. Structural design and analysis of mobile emergency water purification trolly with continuous water intake[J]. Chinese Journal of Engineering Design, 2021, 28(1): 105-111.
[6] WANG Chao, SUN Wen-xu, MA Xiao-jing, CHEN Ji-yang, LUAN Yi-zhong, MA Si-le. Temperature control system of HVPE growth equipment based on fuzzy control[J]. Chinese Journal of Engineering Design, 2020, 27(6): 765-770.
[7] TANG Rong-jiang, HU Bin-fei, ZHANG Miao, LU Zeng-jun, XIAO Fei, LAI Fan. Analysis and optimization for pre-filteration performance of high inlet pipe of commercial vehicle based on CFD and test[J]. Chinese Journal of Engineering Design, 2019, 26(4): 403-408.
[8] LAI Sen-cai, REN Wen. Kalman speed measurement algorithm for tachogenerator under structural asymmetry conditions[J]. Chinese Journal of Engineering Design, 2018, 25(6): 639-646.
[9] YIN Song, WU Huai-chao, YANG Lü, YAN Wen-meng, SHEN Rui-fang. Design of spindle drive control system of high-speed precision roll grinding head[J]. Chinese Journal of Engineering Design, 2018, 25(3): 346-352,366.
[10] ZHANG Zhi-shun, NIU Yu-gang. Design and implementation of bidirectional weighbridge unattended weighing system based on PLC[J]. Chinese Journal of Engineering Design, 2018, 25(3): 360-366.
[11] ZHANG Cao, HUA Liang, JI Ting, ZHOU Yu-song, DONG Liang, LI Peng-fei. Development of sandwich automatic production and sale system[J]. Chinese Journal of Engineering Design, 2018, 25(3): 353-359.
[12] HUANG Zi-liang, Fang Chen-hao, OUYANG Xiao-ping, YANG Jin-jiang, YANG Hua-yong. Research on the sensing system of lower limb exoskeleton robot based on multi-information fusion[J]. Chinese Journal of Engineering Design, 2018, 25(2): 159-166.
[13] CHEN Meng-yuan. Research on design of automatic detection system for soil limit moisture content[J]. Chinese Journal of Engineering Design, 2017, 24(4): 473-479.
[14] PAN Chun-rong, XU Hua. Design of X-type unmanned quadrotor based on STM32[J]. Chinese Journal of Engineering Design, 2017, 24(2): 196-202,210.
[15] ZHENG Tian-chi, SHAO Jian-xin, GUO Lin-na, SUN Xiao-gang, ZHANG Jun, QIU Zi-xue. Design of control system for core package pins puncture machine of aluminum electrolytic capacitor[J]. Chinese Journal of Engineering Design, 2016, 23(4): 378-384.