Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2001, Vol. 8 Issue (4): 168-172    DOI:
    
Research on Tolerance Analysis of Visualization
 LIU  Yu-Sheng
State Key Laboratory of CAD&CG, Zhejiang University, Hangzhou 310027, China
Download: HTML     PDF(131KB)
Export: BibTeX | EndNote (RIS)      

Abstract   Tolerance analysis is imperative for integration of CAD/CAM. Automatic generation of tolerance chain and its integration with CAD system are studied systematically first. Second, visualization tolerance analysis is proposed and the general processes for it are analyzed. Last, an example illustrates the application of the proposed method.

Key words：  tolerance analysis      visualization      CAD/CAM     
Published: 15 December 2001
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
LIU Yu-Sheng
Cite this article:

LIU Yu-Sheng. Research on Tolerance Analysis of Visualization. Chinese Journal of Engineering Design, 2001, 8(4): 168-172.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2001/V8/I4/168


可视化公差分析方法的研究

指出了目前公差分析方法中亟待解决的问题,研究了零件中尺寸/公差链的自动生成及其与CAD系统的有机集成.提出并进行了可视化的公差分析,给出了可视化公差分析的一般步骤,最后给出了实例.

关键词： 公差分析,  可视化,  CAD/CAM 
[1] WU Qiu-ping, LI Yang-ping, CHANG Yong. The dimension synthesis of disc cams with translating flat-faced follower based on technology of the visualization-oriented mapping[J]. Chinese Journal of Engineering Design, 2016, 23(2): 116-123.
[2] SUN Zhong-fei，ADAYI·Xieeryazidan，DING Han. NURBS design of spiral bevel gear with the spherical involute tooth profile[J]. Chinese Journal of Engineering Design, 2014, 21(3): 278-284.
[3] CHEN Hong-Yue, MAO Jun, ZHANG Yu. Visualizing simulation of flow field in the large displacementgear pump based on twomodule gears[J]. Chinese Journal of Engineering Design, 2012, 19(3): 192-195.
[4] LIU Yu-Sheng. Mathematical model for straightness based on DOF variation[J]. Chinese Journal of Engineering Design, 2002, 9(1): 27-30.