建模、仿真、分析与决策 |
|
|
|
|
柔顺停歇机构伪刚体模型的运动学和动力学分析 |
独亚平( ),赵春花( ),郭嘉辉,周川,张立强 |
上海工程技术大学 机械与汽车工程学院,上海 201620 |
|
Kinematic and dynamic analysis of pseudo-rigid body model of compliant dwell mechanism |
Ya-ping DU( ),Chun-hua ZHAO( ),Jia-hui GUO,Chuan ZHOU,Li-qiang ZHANG |
School of Mechanical and Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China |
引用本文:
独亚平,赵春花,郭嘉辉,周川,张立强. 柔顺停歇机构伪刚体模型的运动学和动力学分析[J]. 工程设计学报, 2022, 29(2): 202-211.
Ya-ping DU,Chun-hua ZHAO,Jia-hui GUO,Chuan ZHOU,Li-qiang ZHANG. Kinematic and dynamic analysis of pseudo-rigid body model of compliant dwell mechanism[J]. Chinese Journal of Engineering Design, 2022, 29(2): 202-211.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2022.00.021
或
https://www.zjujournals.com/gcsjxb/CN/Y2022/V29/I2/202
|
1 |
HOWELL L L. Compliant Mechanisms[M]. New York: John Wiley & Sons, 2001: 97-129.
|
2 |
王雯静,余跃庆,王华伟.柔顺机构国内外研究现状分析[J].机械设计,2007(6):1-4. doi:10.3969/j.issn.1001-2354.2007.06.001 WANG Wen-jing, YU Yue-qing, WANG Hua-wei, et al. Analysis on the research status of compliant mechanism at home and abroad[J]. Journal of Machine Design, 2007(6): 1-4.
doi: 10.3969/j.issn.1001-2354.2007.06.001
|
3 |
孔垂旺,陈为林,卢清华,等.单级柔顺正交位移放大机构非线性建模与优化[J].工程设计学报,2020,27(1):76-86. doi:10.3785/j.issn.1006-754X.2020.00.014 KONG Chui-wang, CHEN Wei-lin, LU Qing-hua,et al. Nonlinear modeling and optimization of single-stage compliant orthogonal displacement amplification mechanism[J]. Chinese Journal of Engineering Design, 2020, 27(1): 76-86.
doi: 10.3785/j.issn.1006-754X.2020.00.014
|
4 |
李鹏飞,曹博宇,汪振宇,等.含非线性大变形构件的柔顺机构建模与分析[J].振动与冲击,2019,38(11):111-115. LI Peng-fei, CAO Bo-yu, WANG Zhen-yu, et al. Modeling and analysis for compliant mechanisms with nonlinear large deformation components[J]. Journal of Vibration and Shock, 2019, 38(11): 111-115
|
5 |
LING M, HOWELL L L. CAO J,et al. A pseudo-static model for dynamic analysis on frequency domain of distributed compliant mechanisms[J]. Journal of Mechanisms and Robotics, 2018, 10(5): 5-11. doi:10. 1115/1.4040700
doi: 10. 1115/1.4040700
|
6 |
李渊,杜秋月.末端加载力矩的初始弯曲柔性梁1R伪刚体模型[J].机械传动,2018,42(10):41-45,51. LI Yuan, DU Qiu-yue. 1R pseudo-rigid-body model of initially curved flexible beam with end loaded moment[J]. Journal of Mechanical Transmission, 2018, 42(10): 41-45, 51.
|
7 |
李茜,余跃庆,常星.基于2R伪刚体模型的柔顺机构动力学建模及特性分析[J].机械工程学报,2012,48(13): 40-48. doi:10.3901/jme.2012.13.040 LI Qian, YU Yue-qing, CHANG Xing, et al. Dynamic modeling and analysis of compliant mechanisms based on 2R pseudo-rigid-body model[J]. Journal of Mechanical Engineering, 2012, 48(13): 40-48.
doi: 10.3901/jme.2012.13.040
|
8 |
田亚平,康军凤.基于3R伪刚体模型的柔顺杆动力学建模及分析[J].机械传动,2013,37(5):75-78. TIAN Ya-ping, KANG Jun-feng. Dynamics modeling and analysis of compliant bar based on 3R pseudo-rigid-body model[J]. Journal of Mechanical Transmission, 2013, 37(5): 75-78.
|
9 |
余跃庆,徐齐平.柔顺机构PR伪刚体动力学建模与特性分析[J].农业机械学报,2013,44(3):231-235. doi:10.6041/j.issn.1000-1298.2013.03.041 YU Yue-qing, XU Qi-ping. Dynamic modeling and characteristic analysis of compliant mechanisms based on PR pseudo-rigid-body model[J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(3): 231-235.
doi: 10.6041/j.issn.1000-1298.2013.03.041
|
10 |
路建鹏,薄瑞峰,孙楷,等.柔顺机构PRR伪刚体模型的研究[J].机械设计与制造,2016(4):114-117. doi:10.3969/j.issn.1001-3997.2016.04.030 LU Jian-peng, BO Rui-feng, SUN Kai, et al. PRR pseudo-rigid-body model of compliant mechanisms[J]. Machinery Design & Manufacture, 2016(4): 114-117.
doi: 10.3969/j.issn.1001-3997.2016.04.030
|
11 |
朱延飞,王刚.组合连杆机构的停歇特性分析及优化设计[J].机械管理开发,2008,23(5):51-52. doi:10.3969/j.issn.1003-773X.2008.05.026 ZHU Yan-fei, WANG Gang. Analysis of dwelling char acteristic and optimum design of a bar linkage[J]. Mechanical Management and Development, 2008, 23(5): 51-52.
doi: 10.3969/j.issn.1003-773X.2008.05.026
|
12 |
袁健博.平面连杆停歇机构设计探究[J].现代职业教育,2019(13):112-113. YUAN Jian-bo. Research on the design of plane link stopping mechanism[J]. Modern Vocational Education, 2019 (13): 112-113.
|
13 |
张元越.基于曲柄齿轮齿条的串联导杆机构高阶停歇的传动设计与研究[J].机械设计,2011,28(3):6-8. ZHANG Yuan-yue. Drive design and research on high ordered intermittence of series guide-bar mechanism based on crank gear rack mechanism[J]. Journal of Mechine Design, 2011, 28(3): 6-8.
|
14 |
LI Z, KOTA S. Dynamic analysis of compliant mechanisms[J]. American Society of Mechanical Engineers, 2002, 3(4): 43-50. doi:10.1115/detc2002/mech-34205
doi: 10.1115/detc2002/mech-34205
|
15 |
SONMEZ Ü. Introduction to compliant long dwell mechanism designs using buckling beams and arcs[J]. Journal of Mechanical Design, 2007, 129(8): 831-843. doi:10.1115/1.2735337
doi: 10.1115/1.2735337
|
16 |
TEKES A, SONMEZ Ü, GUVENC B A. Compliant folded beam suspension mechanism control for rotational dwell function generation using the state feedback lineari zation scheme[J]. Mechanism and Machine Theory, 2010, 45(12): 1924-1941. doi:10.1016/j.mechmachtheory. 2010. 07.005
doi: 10.1016/j.mechmachtheory. 2010. 07.005
|
17 |
TEKES A, LIN H, Design MCFALL K., modelling and experimentation of a novel compliant translational dwell mechanism[J]. Journal of Mechanical Science and Technology, 2019, 33(7): 3137-3145. doi:10.1007/s12206-019-0609-2
doi: 10.1007/s12206-019-0609-2
|
18 |
SONMEZ Ü. Synthesis methodology of a compliant exact long dwell mechanism using elastica theory[J]. International Journal of Mechanics and Materials in Design, 2006, 3(1): 73-90. doi:10.1007/s10999-006-9014-y
doi: 10.1007/s10999-006-9014-y
|
19 |
徐先洋,应小刚,邵世明,等.平面柔顺机构力学特性的研究进展[J].机械制造,2016,54(6):89-92. doi:10.3969/j.issn.1000-4998.2016.06.029 XU Xian-yang, YING Xiao-gang, SHAO Shi-ming, et al. Research progress on mechanical characteristics of planar compliant mechanisms[J]. Machinery, 2016, 54(6): 89-92.
doi: 10.3969/j.issn.1000-4998.2016.06.029
|
20 |
陈知泰,余跃庆,杜兆才,等.柔顺机构的频率特性分析[J].机械设计与研究,2005,21(6):24-26. doi:10.3969/j.issn.1006-2343.2005.06.006 CHEN Zhi-tai, YU Yue-qing, DU Zhao-cai,et al. Analysis of frequency for compliant mechanisms[J]. Machine Design and Research, 2005, 21(6): 24-26.
doi: 10.3969/j.issn.1006-2343.2005.06.006
|
21 |
钱若军,袁行飞,谭元莉.结构屈曲分析理论和方法[M].南京:东南大学出版社,2018:105-109. QIAN Ruo-jun, YUAN Xing-fei, TAN Yuan-li. Theory and method of structural buckling analysis[M]. Nanjing: Southeast University Press, 2018: 105-109.
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|