Please wait a minute...
工程设计学报
工程设计学报  2021, Vol. 28 Issue (3): 268-277    DOI: 10.3785/j.issn.1006-754X.2021.00.034
设计理论与方法     
两段式液压机械无级传动机构运动特性研究
张璐, 杨树军, 李学良, 韩斌, 庞雨
燕山大学 河北省特种运载装备重点实验室， 河北 秦皇岛 066004
Research on kinematic characteristics of two-stage hydro-mechanical continuously variable transmission mechanism
ZHANG Lu, YANG Shu-jun, LI Xue-liang, HAN Bin, PANG Yu
Hebei Key Laboratory of Special Delivery Equipment， Yanshan University， Qinhuangdao 066004， China
 全文: PDF(2563 KB)   HTML
摘要： 两段式液压机械无级传动能够实现大传动比、宽传动范围的无级变速，并且可以降低液压元件的额定功率，提高全程的传动效率。该传动机构的运动特性关系着整车工作模式的设定及其性能的发挥。分析了液压机械无级传动机构分矩汇速型、分速汇速型和分速汇矩型三种类型的分汇流形式。利用杠杆法分析了外力构件位置对机械点分布、液压元件正反相位和功率流类型的影响，获得了两段式液压机械无级传动机构的可行分汇流形式。总结了各个段内液压元件转速与输出转速的关系，并基于无速差换段理论对段间输出转速的衔接规律进行了研究。通过液压元件正反相位的往返变化，实现了两段式液压机械无级传动输出转速的连续无级变化。搭建了采用分矩汇速+分矩汇速型液压机械无极变速器的ZL50型装载机的仿真平台，进行装载机在典型V循环工况下运动特性的模拟，分析了变速器的输出转矩和传动效率，结果验证了理论分析结果的正确性。研究揭示了液压机械无级传动机构的段内运动特性及段间的运动衔接规律，为液压机械无级传动机构的设计及工程应用提供了理论依据。
Abstract: The two-stage hydro-mechanical continuously variable transmission can realize continuously variable transmission with large transmission ratio and wide transmission range, reduce the rated power of hydraulic components and improve the whole transmission efficiency. The kinematic characteristics of the transmission mechanism are related to the setting of the working mode and the performance of the whole vehicle. This paper analyzed three types of split and confluence forms of hydro-mechanical continuously variable transmission mechanism: the split-torque confluence-speed type, the split-speed confluence-speed type and the split-speed confluence-torque type. Using the lever method, the influence of the position of external force components on the distribution of mechanical points, the positive and negative phases of hydraulic components and the power split type were studied, and the feasible form of split and confluence of the two-stage hydro-mechanical continuously variable transmission mechanism was obtained. The relationship between the rotation speed of hydraulic components and the output rotation speed in each segment was summarized, and the connection law of the output rotation speed between segments was studied based on the theory of no speed difference range-shift. Through the round-trip change of the positive and negative phases of the hydraulic components, the continuous variable variation of the output rotation speed of the two-stage hydro-mechanical continuous transmission was realized. A simulation platform of ZL50 loader was built, which adopted the hydro-mechanical continuously variable transmission of the split-torque confluence-speed and split-torque confluence-speed. The movement characteristics of the loader under typical V cycle working conditions were simulated, and the output torque and transmission efficiency of the transmission was analyzed. The result verified the correctness of the theoretical analysis result. The research reveals the motion characteristics of the hydro-mechanical continuously variable transmission mechanism and the motion connection law between the segments, which provides a theoretical basis for the design and engineering application of the hydro-mechanical continuously variable transmission mechanism.
收稿日期: 2019-11-27 出版日期: 2021-06-28
:  TH 132  
基金资助: 国家自然科学基金资助项目（51675462）
通讯作者: 杨树军（1970—），男，甘肃秦安人，教授，博士生导师，博士，从事车辆新型传动技术及车辆控制等研究，E-mail：ysj@ysu.edu.cn，https：//orcid.org/0000-0002-4328-7131     E-mail: ysj@ysu.edu.cn
作者简介: 张璐（1993—），女，河北唐山人，硕士生，从事车辆新型传动技术及车辆控制研究，E-mail：Claire_Z@163.com，https：//orcid.org/0000-0002-9651-8247；
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

张璐, 杨树军, 李学良, 韩斌, 庞雨. 两段式液压机械无级传动机构运动特性研究[J]. 工程设计学报, 2021, 28(3): 268-277.

ZHANG Lu, YANG Shu-jun, LI Xue-liang, HAN Bin, PANG Yu. Research on kinematic characteristics of two-stage hydro-mechanical continuously variable transmission mechanism. Chinese Journal of Engineering Design, 2021, 28(3): 268-277.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2021.00.034    或    https://www.zjujournals.com/gcsjxb/CN/Y2021/V28/I3/268

[1] 杨新海, 沈晓鹏, 赵继亮, 谢哲, 苑会领. 基于缓冲阻尼的空间大惯量负载驱动系统的研究[J]. 工程设计学报, 2022, 29(1): 92-99.
[2] 郝为亮, 潘春荣, 任艳奎. 扫地机器人触发式液压辅助越障机构的设计[J]. 工程设计学报, 2021, 28(5): 569-575.
[3] 徐勇明, 汤一帆, 张盛, 史建勋, 郁云忠, 张征. 电力线缆自动化矫直的仿真和实验研究[J]. 工程设计学报, 2021, 28(3): 329-334.
[4] 孙月海, 唐二星. 弧齿锥齿轮基本参数优化设计[J]. 工程设计学报, 2020, 27(5): 616-624.
[5] 汤亮, 何仁杰, 龚发云, 李飞扬, 刘冠军, 杨敏. 变风载下风电齿轮箱内部激励规律研究及动态特性优化[J]. 工程设计学报, 2020, 27(2): 212-222.
[6] 李松梅, 邱世凯. 三叉杆式万向联轴器的平均传动效率分析[J]. 工程设计学报, 2019, 26(4): 379-384.
[7] 佘银柱, 吕 明, 王时英. 超声珩齿中弯曲振动变幅器的设计与研究[J]. 工程设计学报, 2011, 18(6): 471-476.
[8] 李立新, 江玉刚, 曹谊勃. 基于精确齿面建模的ZA蜗杆蜗轮有限元接触分析[J]. 工程设计学报, 2011, 18(1): 38-42.
[9] 许 翔, 杨定富, 索文超, 刘 刚. 基于时变载荷的齿轮摩擦功率损失计算研究[J]. 工程设计学报, 2010, 17(3): 224-228.
[10] 谷计划, 段建中. 格利森弧齿锥齿轮啮合传动节线的数学原理[J]. 工程设计学报, 2010, 17(1): 71-75.